Effect of the Temperature on the Composition of Lignin Pyrolysis Products
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
The temperature dependence of the pyrolysis products of two types of lignin (Alcell lignin and Asian lignin) was investigated using pyrolysis−gas chromatography−mass spectrometry (PyGC−MS). About 50 compounds were identified and quantified for each type of lignin over a temperature range of 400−800 °C. The maximum yield of phenolic compounds was obtained at 600 °C for both lignins, which was 17.2% for Alcell lignin and 15.5% for Asian lignin. Most of the phenolic compounds had an individual yield of less than 1%; however, for Alcell lignin, 5-hydroxyvanillin was the highest yield at 4.29 wt % on dry ash-free lignin, and for Asian lignin, 2-methoxy-4-vinylphenol was the highest yield at 4.15 wt % on dry ash-free lignin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Primary stage of lignin pyrolysis containing more intense structural decomposition happens at the temperature range of 400–600 °C after initial stage, where phenolic compounds (which is both temperature induced and time induced) are the major components during this stage [146–148].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [147]
Citations
Cites
Comprehensive Handbook of Chemical Bond Energies
Luo, Y.-R. (2007) · CRC Press eBooks · doi:10.1201/9781420007282 · Cited by 3,881
Lignins. Occurrence, Formation, Structure and Reactions
Sarkanen, K. V., & Ludwig, C. H. (1971) · Medical Entomology and Zoology · Cited by 2,008
New group contribution method for estimating properties of pure compounds
Constantinou, L., & Gani, R. (1994) · AIChE Journal · doi:10.1002/aic.690401011 · Cited by 1,226
Principles and practice of biomass fast pyrolysis processes for liquids
Bridgwater, A. V. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00005-4 · Cited by 754
Self-citationMansouri, N.-E. E., & Salvadó, J. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.10.002 · Cited by 599
Beech Lignin—Proposal of a Constitutional Scheme
Nimz, H. (1974) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197403131 · Cited by 378
Lignin pyrolysis products: Their structures and their significance as biomarkers
Saiz-Jimenez, C., & De Leeuw, J. W. (1986) · Organic Geochemistry · doi:10.1016/s0146-6380(86)80024-9 · Cited by 354
Analytical methods for determining functional groups in various technical lignins
El Mansouri, N.-E., & Salvadó, J. (2007) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.02.006 · Cited by 341
Thermal decomposition of milled wood lignins studied by thermogravimetry/mass spectrometry
Jakab, E., Faix, O., & Till, F. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00046-6 · Cited by 321
Cited by
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
Schutyser, W., Renders, T., Van den Bosch, S., Koelewijn, S.-F., Beckham, G. T., & Sels, B. F. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00566k · Cited by 2,552
Liquid fuels, hydrogen and chemicals from lignin: A critical review
Azadi, P., Inderwildi, O. R., Farnood, R., & King, D. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.022 · Cited by 1,066
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Hydrothermal conversion of lignin: A review
Kang, S., Li, X., Fan, J., & Chang, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.013 · Cited by 552
Understanding the Fast Pyrolysis of Lignin
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201100133 · Cited by 468
Thermal degradation of softwood lignin and hardwood lignin by TG-FTIR and Py-GC/MS
Zhao, J., Xiuwen, W., Hu, J., Liu, Q., Shen, D., & Xiao, R. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.06.006 · Cited by 463
Production, separation and applications of phenolic-rich bio-oil – A review
Kim, J.-S. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.08.121 · Cited by 391
Stockwell, C. E., Veres, P. R., Williams, J., & Yokelson, R. J. (2015) · Atmospheric Chemistry and Physics · doi:10.5194/acp-15-845-2015 · Cited by 346
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Torrefaction, pyrolysis and two-stage thermodegradation of hemicellulose, cellulose and lignin
Chen, W.-H., Wang, C.-W., Ong, H. C., Show, P. L., & Hsieh, T.-H. (2019) · Fuel · doi:10.1016/j.fuel.2019.116168 · Cited by 358
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
Lignin Pyrolysis Components and Upgrading—Technology Review
Mu, W., Ben, H., Ragauskas, A., & Deng, Y. (2013) · BioEnergy Research · doi:10.1007/s12155-013-9314-7 · Cited by 333
The pyrolysis chemistry of a β-O-4 type oligomeric lignin model compound
Chu, S., Subrahmanyam, A. V., & Huber, G. W. (2013) · Green Chem. · doi:10.1039/c2gc36332a · Cited by 331
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
“Lignin processing has been the subject of recent research [30–33].”
MethodSelf-citationUtilization of lignin: A sustainable and eco-friendly approach
Kumar, A., Anushree, Kumar, J., & Bhaskar, T. (2020) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.03.005 · Cited by 262
Producing jet fuel from biomass lignin: Potential pathways to alkyl-benzenes and cycloalkanes
Cheng, F., & Brewer, C. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.030 · Cited by 268
Hatch, L. E., Luo, W., Pankow, J. F., Yokelson, R. J., Stockwell, C. E., & Barsanti, K. C. (2015) · Atmospheric Chemistry and Physics · doi:10.5194/acp-15-1865-2015 · Cited by 248
“Guaiacols are commonly measured in smoke from coniferous fuels (Jiang et al., 2010; Saiz-Jimenez and De Leeuw, 1986), as these softwoods contain lignins composed primarily of guaiacyl units (Shafizadeh, 1982).”
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Dai, L., Wang, Y., Liu, Y., He, C., Ruan, R., Yu, Z., Jiang, L., Zeng, Z., & Wu, Q. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142386 · Cited by 264
Formation of phenolic oligomers during fast pyrolysis of lignin
Bai, X., Kim, K. H., Brown, R. C., Dalluge, E., Hutchinson, C., Lee, Y. J., & Dalluge, D. (2014) · Fuel · doi:10.1016/j.fuel.2014.03.013 · Cited by 234
Molecular Products and Radicals from Pyrolysis of Lignin
Kibet, J., Khachatryan, L., & Dellinger, B. (2012) · Environmental Science & Technology · doi:10.1021/es302942c · Cited by 226
Advancement in technologies for the depolymerization of lignin
Agarwal, A., Rana, M., & Park, J.-H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.017 · Cited by 232
NMR Characterization of Pyrolysis Oils from Kraft Lignin
Ben, H., & Ragauskas, A. J. (2011) · Energy & Fuels · doi:10.1021/ef2001162 · Cited by 229
Fan, L., Chen, P., Zhang, Y., Liu, S., Liu, Y., Wang, Y., Dai, L., & Ruan, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.072 · Cited by 218
Zadeh, Z. E., Abdulkhani, A., Aboelazayem, O., & Saha, B. (2020) · Processes · doi:10.3390/pr8070799 · Cited by 202
Cornelissen, G., Pandit, N. R., Taylor, P., Pandit, B. H., Sparrevik, M., & Schmidt, H. P. (2016) · PLOS ONE · doi:10.1371/journal.pone.0154617 · Cited by 186
“This is in the same order of magnitude as other high temperature (700°C) pyrolysis systems [31–34].”
ResultCharacteristics and mechanism study of analytical fast pyrolysis of poplar wood
Dong, C.-Q., Zhang, Z.-F., Lu, Q., & Yang, Y.-P. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.12.012 · Cited by 209
“8, path 3), respectively [50].”
Zhang, T., Li, X., Qiao, X., Zheng, M., Guo, L., Song, W., & Lin, W. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00247 · Cited by 167
Recent Progress in Quantum Chemistry Modeling on the Pyrolysis Mechanisms of Lignocellulosic Biomass
Hu, B., Zhang, B., Xie, W.-L., Jiang, X.-Y., Liu, J., & Lu, Q. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01948 · Cited by 161
Lazaridis, P. A., Fotopoulos, A. P., Karakoulia, S. A., & Triantafyllidis, K. S. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00295 · Cited by 155
“It is has been previously shown that the increase of the pyrolysis temperature promotes the decomposition of high molecular weight phenolic oligomers to smaller compounds via depolymerisation and cracking of C-C bonds (Jiang et al., 2010; Wang et al., 2014).”
BackgroundBiomass pyrolysis mechanism for carbon-based high-value products
Liu, J., Chen, X., Chen, W., Xia, M., Chen, Y., Chen, H., Zeng, K., & Yang, H. (2022) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2022.09.063 · Cited by 166
Liu, W., You, W., Sun, W., Yang, W., Korde, A., Gong, Y., & Deng, Y. (2020) · Nature Energy · doi:10.1038/s41560-020-00680-x · Cited by 161
In-situ and ex-situ catalytic upgrading of vapors from microwave-assisted pyrolysis of lignin
Fan, L., Chen, P. L., Zhou, N., Liu, S., Zhang, Y., Liu, Y., Wang, Y., Omar, M. M., Peng, P., Addy, M., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.09.200 · Cited by 142
Impacts of temperature on evolution of char structure during pyrolysis of lignin
Zhang, C., Shao, Y., Zhang, L., Zhang, S., Westerhof, R. J. M., Liu, Q., Jia, P., Li, Q., Wang, Y., & Hu, X. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.134381 · Cited by 140
Electrochemical upgrading of depolymerized lignin: a review of model compound studies
Garedew, M., Lam, J. C., Petitjean, L., Huang, S., Song, B., Lin, F., Jackson, J. E., Saffron, C. M., & Anastas, P. T. (2021) · Green Chemistry · doi:10.1039/d0gc04127k · Cited by 140
Shen, D., Liu, G., Zhao, J., Xue, J., Guan, S., & Xiao, R. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.022 · Cited by 142
Zhou, H., Wu, C., Onwudili, J. A., Meng, A., Zhang, Y., & Williams, P. T. (2014) · Energy & Fuels · doi:10.1021/ef5013769 · Cited by 132
Cho, J., Chu, S., Dauenhauer, P. J., & Huber, G. W. (2012) · Green Chem. · doi:10.1039/c1gc16222e · Cited by 130
A new insight of lignin pyrolysis mechanism based on functional group evolutions of solid char
Yang, H., Dong, Z., Liu, B., Chen, Y., Gong, M., Li, S., & Chen, H. (2021) · Fuel · doi:10.1016/j.fuel.2020.119719 · Cited by 129
Liu, Y., Shi, Q., Zhang, Y., He, Y., Chung, K. H., Zhao, S., & Xu, C. (2012) · Energy & Fuels · doi:10.1021/ef300501t · Cited by 127
Xia, C., Cai, L., Zhang, H., Zuo, L., Shi, S. Q., & Lam, S. S. (2021) · Biofuel Research Journal · doi:10.18331/brj2021.8.1.2 · Cited by 126
“8.1.2 2007; Wang et al., 2009; Jiang et al., 2010; Hu et al., 2013).”
InfluentialMa, Z., Wang, J., Zhou, H., Zhang, Y., Yang, Y., Liu, X., Ye, J., Chen, D., & Wang, S. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.020 · Cited by 121
Kurnia, I., Karnjanakom, S., Bayu, A., Yoshida, A., Rizkiana, J., Prakoso, T., Abudula, A., & Guan, G. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.08.026 · Cited by 118
Free-Radical Analysis on Thermochemical Transformation of Lignin to Phenolic Compounds
Hu, J., Shen, D., Xiao, R., Wu, S., & Zhang, H. (2013) · Energy & Fuels · doi:10.1021/ef3016602 · Cited by 116
Density functional theory studies on pyrolysis mechanism of β-O-4 type lignin dimer model compound
Huang, J., Liu, C., Wu, D., Tong, H., & Ren, L. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.07.007 · Cited by 116
Lignin as a renewable aromatic resource for the chemical industry
Gosselink, R. J. A. (2011) · doi:10.18174/186285 · Cited by 177
Slow pyrolysis of prot, alkali and dealkaline lignins for production of chemicals
Biswas, B., Singh, R., Kumar, J., Khan, A. A., Krishna, B. B., & Bhaskar, T. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.01.131 · Cited by 111
Gómez, N., Banks, S. W., Nowakowski, D. J., Rosas, J. G., Cara-Jiménez, J., Sánchez, M. E., & Bridgwater, A. V. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.11.021 · Cited by 114
Self-citationA Multitechnique Characterization of Lignin Softening and Pyrolysis
Shrestha, B., le Brech, Y., Ghislain, T., Leclerc, S., Carré, V., Aubriet, F., Hoppe, S., Marchal, P., Pontvianne, S., Brosse, N., et al. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01130 · Cited by 108
Letourneau, D. R., & Volmer, D. A. (2021) · Mass Spectrometry Reviews · doi:10.1002/mas.21716 · Cited by 118
Ben, H., & Ragauskas, A. J. (2011) · Energy & Fuels · doi:10.1021/ef201376w · Cited by 118
Pyrolysis oils from CO2 precipitated Kraft lignin
Kosa, M., Ben, H., Theliander, H., & Ragauskas, A. J. (2011) · Green Chemistry · doi:10.1039/c1gc15818j · Cited by 105
Smith, E. A., Park, S., Klein, A. T., & Lee, Y. (2012) · Energy & Fuels · doi:10.1021/ef3003558 · Cited by 103
Screening of wheat straw biochars for the remediation of soils polluted with Zn (II) and Cd (II)
Qian, T.-T., Wu, P., Qin, Q.-Y., Huang, Y.-N., Wang, Y.-J., & Zhou, D.-M. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.09.034 · Cited by 98
Influence of temperature and time on initial pyrolysis of cellulose and xylan
Usino, D. O., Supriyanto, S., Ylitervo, P., Pettersson, A., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104782 · Cited by 103
Smith, E. A., & Lee, Y. (2010) · Energy & Fuels · doi:10.1021/ef100629a · Cited by 96
Shen, D., Zhao, J., & Xiao, R. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.06.067 · Cited by 97
Production of aromatic monomers from catalytic pyrolysis of black-liquor lignin
Shen, D., Zhao, J., Xiao, R., & Gu, S. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.12.013 · Cited by 99
Effect of the Fast Pyrolysis Temperature on the Primary and Secondary Products of Lignin
Zhou, S., Garcìa-Pèrez, M., Pecha, M. B., Kersten, S. R. A., McDonald, A. G., & Westerhof, R. J. M. (2013) · Energy & Fuels · doi:10.1021/ef4001677 · Cited by 102
Promising Techniques for Depolymerization of Lignin into Value‐added Chemicals
Ren, T., Qi, W. D., Su, R., & He, Z. (2018) · ChemCatChem · doi:10.1002/cctc.201801428 · Cited by 96
A systematic review of lignocellulosic biomass for remediation of environmental pollutants
Kaur, K., Kaur, R., & Kaur, H. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100547 · Cited by 92
Farag, S., Fu, D., Jessop, P. G., & Chaouki, J. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.06.005 · Cited by 90
Zhang, Z., Lü, Q., Ye, X., Li, W.-T., Hu, B., & Dong, C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.10.063 · Cited by 92
Theoretical study of bond dissociation energies for lignin model compounds
Huang, J., Wu, S., Cheng, H. L., Lei, M., Liang, J., & Tong, H. (2015) · Journal of Fuel Chemistry and Technology · doi:10.1016/s1872-5813(15)30011-6 · Cited by 85
Sousa, L. D. C., Foston, M. B., Bokade, V. V., Azarpira, A., Lu, F., Ragauskas, A. J., Ralph, J., Dale, B. E., & Balan, V. (2016) · Green Chemistry · doi:10.1039/c6gc00298f · Cited by 84
Kim, K. H., Brown, R. C., Kieffer, M., & Bai, X. (2014) · Energy & Fuels · doi:10.1021/ef501678w · Cited by 81
Xue, Y., Zhou, S., & Bai, X. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00733 · Cited by 90
Undri, A., Abou‐Zaid, M. M., Briens, C. L., Berruti, F., Rosi, L., Bartoli, M., Frediani, M., & Frediani, P. (2015) · Fuel · doi:10.1016/j.fuel.2015.02.081 · Cited by 84
“The main phenolic compounds (phenol, m-cresol, guaiacol, veratrol, pyrocatechol, 4-methoxyphenol, resorcinol, and vanillin) were the results of lignin pyrolysis [5,45–48] and they were widely present in bottom fractions and to a minor extent in the water rich upper fractions.”
Pyrolysis mechanism of α-O-4 linkage lignin dimer: A theoretical study
Huang, J., & He, C. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.04.012 · Cited by 83
Ghorbannezhad, P., Firouzabadi, M. D., Ghasemian, A., de Wild, P. J., & Heeres, H. J. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.02.019 · Cited by 82
Wądrzyk, M., Janus, R., Lewandowski, M., & Magdziarz, A. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.06.006 · Cited by 84
Leonardis, I., Chiaberge, S., Fiorani, T., Spera, S., Battistel, E., Bosetti, A., Cesti, P., Reale, S., & Angelis, F. D. (2012) · ChemSusChem · doi:10.1002/cssc.201200314 · Cited by 78
Naron, D. R., Collard, F., Tyhoda, L., & Görgens, J. F. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.041 · Cited by 132
Analytical strategies for chemical characterization of bio‐oil
Wang, Y., Han, Y., Hu, W., Fu, D., & Wang, G. (2019) · Journal of Separation Science · doi:10.1002/jssc.201901014 · Cited by 77
Gordobil, O., Olaizola, P., Banales, J. M., & Labidi, J. (2020) · Molecules · doi:10.3390/molecules25051131 · Cited by 76
“These compounds are usually produced from demethoxylation (Ph-OCH3 cracking) and demethylation (PhO-CH3 cracking) of S-type phenols generating phenol derivatives and catechol-type compounds, respectively [37,42].”
BackgroundSuriapparao, D. V., Gautam, R., & Jeeru, L. R. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127357 · Cited by 78
Mechanism on microwave-assisted acidic solvolysis of black-liquor lignin
Dong, C., Feng, C., Liu, Q., Shen, D., & Xiao, R. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.03.060 · Cited by 77
“The chromatographic peaks were identified according to the National Institute of Standards and Technology (NIST) MS library, as well as previously published works (del Río et al., 2011; Hu et al., 2012a; Jiang et al., 2010).”
MethodLumped Approach in Kinetic Modeling of Microwave Pyrolysis of Kraft Lignin
Farag, S., Kouisni, L., & Chaouki, J. (2014) · Energy & Fuels · doi:10.1021/ef4023493 · Cited by 73
Wang, L., Zhang, R., Li, J., Guo, L., Yang, H., Ma, F., & Yu, H. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.06.038 · Cited by 74
Wu, K., Luo, B., Wu, H., Chen, M., Wang, Y., Ge, Z., Chu, S., Liu, Q., & Zhang, H. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114954 · Cited by 72
A Review on Lignin Liquefaction: Advanced Characterization of Structure and Microkinetic Modeling
Terrell, E., Dellon, L. D., Dufour, A., Bartolomei, E., Broadbelt, L. J., & Garcia-Perez, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05744 · Cited by 71
Jin, T., Wang, H., Peng, J., Wu, Y., Huang, Z., Tian, X., & Ding, M. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107201 · Cited by 71
Fast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
“For example, with respect to the production of mono-aromatics yields of up to 20% were reported in micro-pyrolysers [20,21], whereas in screen-heaters and fluidised beds typical yields were only 1 to 4% [16,22,23].”
BackgroundWang, W., Gu, Y., Zhou, C., & Hu, C. (2022) · Catalysts · doi:10.3390/catal12121524 · Cited by 81
“[85] showed similar results: that hardwood lignin started to decompose at lower temperature, which might be owing to the higher concentration of β-O-4 and the lower concentration of C5-C5 than lignin samples from softwood.”
ResultSyguła, E., Ciolkosz, D. E., & Białowiec, A. (2024) · Wood Science and Technology · doi:10.1007/s00226-024-01557-y · Cited by 73
Pandit, N. R., Mulder, J., Hale, S. E., Schmidt, H. P., & Cornelissen, G. (2017) · PLoS ONE · doi:10.1371/journal.pone.0176378 · Cited by 67
Nishu, Li, Y., & Liu, R. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.01.001 · Cited by 66
A simple procedure for chromatographic analysis of bio-oils from pyrolysis
Undri, A., Abou‐Zaid, M. M., Briens, C. L., Berruti, F., Rosi, L., Bartoli, M., Frediani, M., & Frediani, P. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.05.019 · Cited by 71
Sudasinghe, N. M., Cort, J., Hallen, R. T., Olarte, M. V., Schmidt, A. J., & Schaub, T. M. (2014) · Fuel · doi:10.1016/j.fuel.2014.07.069 · Cited by 66
“Analytical techniques used to describe oil composition include gas chromatography–mass spectrometry (GC–MS) [13–16], Fourier transform infrared spectroscopy [15], one-dimensional H and C NMR spectroscopy, and ultraviolet fluorescence spectroscopy [17].”
MethodHe, T., Zhang, Y., Zhu, Y., Wen, W., Pan, Y., Wu, J., & Wu, J. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02635 · Cited by 64
Formaldehyde-Free Method for Incorporating Lignin into Epoxy Thermosets
Zhao, S. J., Huang, X., Whelton, A. J., & Abu‐Omar, M. M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01962 · Cited by 65
Yamaguchi, A., Mimura, N., Shirai, M., & Sato, O. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00786 · Cited by 64
Yang, H.-M., Appari, S., Kudo, S., Hayashi, J., & Norinaga, K. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01289 · Cited by 65
Phenolics Production through Catalytic Depolymerization of Alkali Lignin with Metal Chlorides
Zhang, X., Zhang, Q., Long, J., Xu, Y. Q., Wang, T., Ma, L., & Li, Y. (2014) · BioResources · doi:10.15376/biores.9.2.3347-3360 · Cited by 63
“However, poor liquid yields, complex components, and large amounts of solid residues are the main barriers for this technology (Jiang et al. 2010).”
BackgroundStructural evaluation of Xiaolongtan lignite by direct characterization and pyrolytic analysis
Wang, Y., Wei, X., Wang, S., Li, Z., Li, P., Liu, F., & Zong, Z. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.12.034 · Cited by 62
Zhou, F., Wang, H., Wang, S., Zhao, J., Qu, X., Wang, D., Cai, Y., Zheng, Z., Wang, D., & Yin, H. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.3c07279 · Cited by 65
Production of Liquid Feedstock from Biomass via Steam Pyrolysis in a Fluidized Bed Reactor
Kantarelis, E., Yang, W., & Blasiak, W. (2013) · Energy & Fuels · doi:10.1021/ef400580x · Cited by 66
Fan, Y., Zhang, D., Zheng, A., Zhao, Z., Li, H., & Yang, T. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.014 · Cited by 61
Tan, H., Rong, S., Zhao, R., Cui, H., Zhang, N., Chen, Z., Li, Z., Yi, W., & Zhang, F. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135577 · Cited by 60
Metadata
- Authors
- Jiang, G., Nowakowski, D. J., & Bridgwater, A. V.
- Affiliations
- Aston University (GB)
- Corresponding author
- Jiang, Guozhan
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-07-21
- Volume
- 24
- Issue
- 8
- Pages
- 4470-4475
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2011032908
- Cited by
- 332
- References
- 22
- Citations by year
- 2026: 12 · 2025: 20 · 2024: 13 · 2023: 17 · 2022: 35 · 2021: 18 · 2020: 27 · 2019: 25 · 2018: 29 · 2017: 28 · 2016: 27 · 2015: 16 · 2014: 25 · 2013: 17 · 2012: 10
- FWCI
- 7.55
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Funders
- Engineering and Physical Sciences Research Council (EP/E039995/1)
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Coal Properties and Utilization
- Keywords
- lignin pyrolysis, pyrolysis temperature, Alcell lignin, phenolic compounds, 2-methoxy-4-vinylphenol, pyrolysis product composition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.