Isothermal versus Non-isothermal Adsorption−Desorption Cycling of Triamine-Grafted Pore-Expanded MCM-41 Mesoporous Silica for CO2 Capture from Flue Gas
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
CO 2 adsorption−desorption isotherms for triamine-grafted pore-expanded mesoporous silica (TRI-PE-MCM-41) were measured up to 25 bar using the same adsorption and pretreatment temperatures at 298, 323, and 343 K and compared to CO 2 adsorption data for 13X zeolite, aminated metal organic framework (Zn-Atz MOF), and Darco activated carbon (Darco-AC). Cyclic isothermal adsorption−desorption measurements of pure CO 2 and a 10:90 CO 2 /N 2 mixture were carried out using vacuum swing (VS) and concentration swing (CS) regeneration modes at 298 and 343 K, in dry and humid conditions, and compared to cyclic non-isothermal desorption measurements, i.e., temperature swing (TS) and temperature-vacuum swing (TVS) regeneration operations. In addition to high CO 2 selectivity, it was found that, in comparison to the three other adsorbents, TRI-PE-MCM-41 exhibited higher CO 2 uptake in the presence of a 10:90 CO 2 /N 2 mixture in both dry and humid conditions. Cyclic experiments using VS regeneration mode at 343 K gave a similar CO 2 uptake as the TS regeneration mode. Similar to liquid-phase CO 2 absorption, SO 2 had a deleterious effect on CO 2 adsorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Cited by
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
“…suggested using humid streams to prevent the deactivation and to improve the stability of amine-based adsorbents (Belmabkhout et al. , 2009; Belmabkhout and Sayari, 2010; Belmabkhout et al. , 2010a, b, 2011a, b; Harlick and Sayari, 2006, 2007; Sayari and Belmabkhout, 2010; Serna-Guerrero…”
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Self-citationStability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Self-citationHedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Self-citationSolid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Self-citationRezaei, F., Rownaghi, A. A., Monjezi, S., Lively, R. P., & Jones, C. W. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01286 · Cited by 283
CO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management
Jones, C. W. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114252 · Cited by 268
Oxidation-stable amine-containing adsorbents for carbon dioxide capture
Min, K., Choi, W., Kim, C., & Choi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03123-0 · Cited by 262
Thermal, Oxidative, and CO2-Induced Degradation of Supported Polyethylenimine Adsorbents
Heydari-Gorji, A., & Sayari, A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003446 · Cited by 253
Self-citationWurzbacher, J. A., Gebald, C., & Steinfeld, A. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01681d · Cited by 252
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Peng, X., & Cao, D. (2013) · AIChE Journal · doi:10.1002/aic.14046 · Cited by 92
Effects of O2 and SO2 on the Capture Capacity of a Primary-Amine Based Polymeric CO2 Sorbent
Hallenbeck, A. P., & Kitchin, J. R. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400582a · Cited by 83
Metadata
- Authors
- Belmabkhout, Y., & Sayari, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-08-11
- Volume
- 24
- Issue
- 9
- Pages
- 5273-5280
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2080259915
- Cited by
- 109
- References
- 2
- FWCI
- 23.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.