CoChat

Particulate Emissions of Gas Turbine Engine Combustion of a Fischer−Tropsch Synthetic Fuel

Timko, M. T., Yu, Z., Onasch, T. B., Wong, H.-W., Miake-Lye, R. C., Beyersdorf, A. J., Anderson, B. E., Thornhill, K. L., Winstead, E. L., Corporan, E., DeWitt, M. J., Klingshirn, C. D., Wey, C., Tacina, K., Liscinsky, D. S., Howard, R., Bhargava, A. · 2010 · Energy & Fuels
Cited by 99

The DOI matches its Crossref record.

Abstract

We have performed a comprehensive test of the effects of alternative fuels on the trace gas, nonvolatile particulate material (PM), and volatile PM emissions performance of a PW308 aircraft engine. The tests evaluated standard JP-8 jet fuel, a “zero sulfur” and “zero aromatic” synthetic fuel produced from a natural gas feedstock using the Fischer−Tropsch (FT) process, and a 50/50 blend of the FT fuel and JP-8. A Pratt & Whitney PW308 engine was operated under the same thrust and combustion conditions to ensure that the tests captured fuel differences, rather than engine operation differences. Emissions of trace gases, soot particles, and nucleation/growth PM were directly impacted by the sulfur and aromatic content of the fuel. FT fuel combustion greatly reduced SO 2 (>90%), gaseous hydrocarbons (40%), and NO (6−11%) content compared to JP-8 combustion. In general, combustion of the JP-8/FT fuel blend resulted in emissions intermediate to the FT and JP-8 values. FT combustion dramatically reduces soot particle number, mass, and size relative to JP-8, but increases effective soot particle density. In all cases, the drag behavior of the soot particles indicates deviations from spherical shape and effective soot particle densities are consistent with the soot particles being aggregates of primary spherules. As expected, FT combustion plumes support negligible formation of nucleation/growth mode particles (the number of nucleation growth mode particles is <20% the number of soot particles compared to >500% for sulfur containing JP-8). However, particle nucleation/growth for blended fuel combustion is enhanced relative to JP-8, despite the lower sulfur content of the FT/JP-8 fuel blend. A computational model explains the unexpected particle formation result primarily as the effect of much lower soot emissions present in blended fuel combustion exhaust compared to JP-8. Fuel composition, specifically aromatic and sulfur content, affect all aspects of emissions performance and the effect of simultaneously reducing aromatic and sulfur content can lead to surprising behavior.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef100727t

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Timko, M. T., Yu, Z., Onasch, T. B., Wong, H.-W., Miake-Lye, R. C., Beyersdorf, A. J., Anderson, B. E., Thornhill, K. L., Winstead, E. L., Corporan, E., DeWitt, M. J., Klingshirn, C. D., Wey, C., Tacina, K., Liscinsky, D. S., Howard, R., & Bhargava, A.
Venue
Energy & Fuels
Published
2010-11-18
Volume
24
Issue
11
Pages
5883-5896
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2317254025
Cited by
99
References
0
FWCI
6.97
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.