Formation of Aromatic Structures during the Pyrolysis of Bio-oil
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
The pyrolysis of biomass to produce bio-oil is a very effective way of biomass use. Bio-oil undergoes drastic structural changes as it is upgraded into biofuels or used as a fuel for gasification/combustion. The evolution of aromatic ring systems in bio-oil is a key consideration in bio-oil use. A bio-oil sample produced from the fast pyrolysis of mallee wood at 500 °C, its lignin-derived oligomers, and pure cellulose have been pyrolyzed in a novel two-stage fluidized-bed/fixed-bed reactor at temperatures between 350 and 850 °C. The product tars were characterized with ultraviolet (UV) fluorescence spectroscopy. Our results indicate that significant portions of aromatic ring systems in the bio-oil could turn/polymerize into solids not soluble in CHCl 3 + CH 3 OH during the pyrolysis at relatively low temperatures, e.g., 350–400 °C. This process can be enhanced by the presence of cellulose-/hemicellulose-derived species in the bio-oil, which are reactive and produce radicals to enhance the polymerization reactions. The pyrolysis of cellulose-derived species in the bio-oil tended to form additional very large aromatic ring systems at temperatures higher than 700 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For THF-soluble fraction, almost the half is transformed into volatile products and the remainder is repolymerized into THF-insoluble fraction (of which the structure is composed of mono, 2–3 fused, and 3–5 fused aromatic rings [145]) when the temperature increases up to 300 °C.”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [145]
Citations
Cites
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Progress and recent trends in biodiesel fuels
Demirbas, A. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.09.001 · Cited by 2,050
Richter, H., & Howard, J. B. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00009-5 · Cited by 1,833
The technical and economic feasibility of biomass gasification for power generation
Bridgwater, A. V. (1995) · Fuel · doi:10.1016/0016-2361(95)00001-l · Cited by 1,025
Power generation using fast pyrolysis liquids from biomass
Chiaramonti, D., Oasmaa, A., & Solantausta, Y. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.07.008 · Cited by 619
Characterization of bio-oils in chemical families
Garcia-Perez, M., Chaala, A., Pakdel, H., Kretschmer, D., & Roy, C. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.006 · Cited by 498
Scholze, B., & Meier, D. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00110-8 · Cited by 496
Fates and roles of alkali and alkaline earth metals during the pyrolysis of a Victorian brown coal
Li, C.-Z., Sathe, C., Kershaw, J. R., & Pang, Y. (2000) · Fuel · doi:10.1016/s0016-2361(99)00178-7 · Cited by 423
Self-citation
Research works printed but not linked: 2
- Oasmaa A., 1997, Application of Standard Fuel Oil Analyses
- Li C.-Z., 2000, Fuel, 79, 427
Cited by
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“For THF-soluble fraction, almost the half is transformed into volatile products and the remainder is repolymerized into THF-insoluble fraction (of which the structure is composed of mono, 2–3 fused, and 3–5 fused aromatic rings [145]) when the temperature increases up to 300 °C.”
BackgroundProgress of the applications of bio-oil
Hu, X., & Gholizadeh, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110124 · Cited by 324
Galadima, A., & Muraza, O. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.078 · Cited by 246
Pyrolysis of cellulose: Evolution of functionalities and structure of bio-char versus temperature
Zhang, C., Chao, L., Zhang, Z., Zhang, L., Li, Q., Fan, H., Zhang, S., Liu, Q., Qiao, Y., Tian, Y., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110416 · Cited by 245
Self-citationHu, S., Jiang, L., Wang, Y., Su, S., Sun, L., Xu, B., He, L., & Xiang, J. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.042 · Cited by 244
Self-citation
Metadata
- Authors
- Wang, Y., Li, X., Mourant, D., Gunawan, R., Zhang, S., & Li, C.-Z.
- Affiliations
- Curtin University (AU)
- Corresponding author
- Li, Chun-Zhu
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-10-12
- Volume
- 26
- Issue
- 1
- Pages
- 241-247
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2005113078
- Cited by
- 155
- References
- 30
- Citations by year
- 2026: 6 · 2025: 5 · 2024: 6 · 2023: 6 · 2022: 9 · 2021: 18 · 2020: 19 · 2019: 9 · 2018: 19 · 2017: 13 · 2016: 9 · 2015: 8 · 2014: 11 · 2013: 10 · 2012: 6
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- eSpace (Curtin University) (submittedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
- Keywords
- bio-oil, pyrolysis, aromatic ring formation, hemicellulose, tar formation, polymerization, biomass valorization, biofuels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.