The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Fuel Indexes: A Novel Method for the Evaluation of Relevant Combustion Properties of New Biomass Fuels
Abstract
The increasing demand for biomass fuels leads to the introduction of new biomass fuels into the market. These new biomass fuels (e.g., wastes and residues from agriculture and the food industry, short rotation coppices, and energy crops) are usually not well-defined regarding their combustion behavior. Therefore, fuel characterization methods with a special focus on combustion-related problems (gaseous NO x, HCl, and SO x emissions, ash-melting behavior, and PM emissions) have to be developed. For this purpose, fuel indexes are an interesting option. Fuel indexes are derived from chemical fuel analyses and are checked and evaluated regarding their applicability by measurements performed at lab- and real-scale combustion plants for a large variety of fuels. They provide the possibilities for a pre-evaluation of combustion-relevant problems that may arise from the use of a new biomass fuel. A possible relation to describe the corrosion risk is, for instance, the molar 2S/Cl ratio. The N content in the fuel is an indicator for NO x emissions, and the sum of the concentrations of K, Na, Zn, and Pb in the fuel can give a prediction of the aerosol emissions, whereas the molar (K + Na)/[ x (2S + Cl)] ratio provides a first indication regarding the potential for gaseous HCl and SO x emissions. The molar Si/K ratio can supply information about the K release from the fuel to the gas phase. The molar Si/(Ca + Mg) ratio can give indications regarding the ash-melting temperatures for P-poor fuels. For P-rich fuels, the (Si + P + K)/(Ca + Mg) ratio can be used for the same purpose. The fuel indexes mentioned can provide a first pre-evaluation of combustion-relevant properties of biomass fuels. Therefore, time-consuming and expensive combustion tests can partly be saved. The indexes mentioned are especially developed for grate combustion plants, because interactions of the bed material possible in fluidized-bed combustion systems are not considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860
Lewandowski, I., Scurlock, J. M. O., Lindvall, E., & Christou, M. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(03)00030-8 · Cited by 1,360
Fuel nitrogen conversion in solid fuel fired systems
Glarborg, P. (2003) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(02)00031-x · Cited by 923
Bryers, R. W. (1996) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(95)00012-7 · Cited by 808
Exploration of the ranges of the global potential of biomass for energy
Hoogwijk, M., Faaij, A., van den Broek, R., Berndes, G., Gielen, D., & Turkenburg, W. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00191-5 · Cited by 707
The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences
Baxter, L. L., Miles, T. R., Miles, T. R., Jenkins, B. M., Milne, T., Dayton, D., Bryers, R. W., & Oden, L. L. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00060-x · Cited by 669
Transformation and Release to the Gas Phase of Cl, K, and S during Combustion of Annual Biomass
Knudsen, J. N., Jensen, P. A., & Dam-Johansen, K. (2004) · Energy & Fuels · doi:10.1021/ef049944q · Cited by 595
Ash Transformation Chemistry during Combustion of Biomass
Boström, D., Skoglund, N., Grimm, A., Boman, C., Öhman, M., Broström, M., & Backman, R. (2012) · Energy & Fuels · doi:10.1021/ef201205b · Cited by 440
Slagging tendencies of wood pellet ash during combustion in residential pellet burners
Öhman, M., Boman, C., Hedman, H., Nordin, A., & Boström, D. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.08.016 · Cited by 221
Slagging Characteristics during Residential Combustion of Biomass Pellets
Gilbe, C., Öhman, M., Lindström, E., Boström, D., Backman, R., Samuelsson, R., & Burvall, J. (2008) · Energy & Fuels · doi:10.1021/ef800087x · Cited by 199
Cited by
Vassilev, S. V., Vassileva, C. G., & Vassilev, V. S. (2015) · Fuel · doi:10.1016/j.fuel.2015.05.050 · Cited by 708
Vassilev, S. V., Baxter, D., & Vassileva, C. G. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.043 · Cited by 494
Vassilev, S. V., Baxter, D., & Vassileva, C. G. (2014) · Fuel · doi:10.1016/j.fuel.2013.09.024 · Cited by 419
The potential of the Malaysian oil palm biomass as a renewable energy source
Loh, S. K. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.081 · Cited by 415
Biomass combustion systems: A review on the physical and chemical properties of the ashes
Nunes, L. J. R., Matias, J. C. O., & Catalão, J. P. S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.08.053 · Cited by 345
Metadata
- Authors
- Sommersacher, P., Brunner, T., & Obernberger, I.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-12-16
- Volume
- 26
- Issue
- 1
- Pages
- 380-390
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2330544120
- Cited by
- 272
- References
- 19
- FWCI
- 5.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fuel Indexes: A Novel Method for the Evaluation of Relevant Combustion Properties of New Biomass Fuels. https://app.cochat.ai/papers/10.1021/ef201282y
- The paper
- Sommersacher, P., Brunner, T., & Obernberger, I. (2012). Fuel Indexes: A Novel Method for the Evaluation of Relevant Combustion Properties of New Biomass Fuels. Energy & Fuels. https://doi.org/10.1021/ef201282y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.