Polycyclic Aromatic Hydrocarbons in Birch Wood Slow Pyrolysis Products
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The products from slow pyrolysis of birch hardwood are promising to be used for various purposes, in addition to conventional charcoal. To evaluate their utilization, knowledge about their polycyclic aromatic hydrocarbons (PAHs) is needed. The content and distribution of the PAHs in the different products were determined in a test run with a typical slow pyrolysis carbonization retort. The PAH compositions of gases, and distillates including aqueous phases and tars, were followed in terms of time and retort temperature. Also, other compounds in gases and aqueous phases through the test run were analyzed. PAHs were found in all the products, but were mostly concentrated in the tars. Because of the results, the PAH contents in the tars has to be considered. In contrast, very low PAH concentrations were found for the tar-free aqueous phases. Because of low PAH and also low benzene contents, the aqueous phases are promising to be utilized in various applications, for example as biodegradable pesticides. Due to high proportions of combustible gases, such as carbon monoxide, methane, and hydrogen, the gases could be utilized as a fuel gas for energy. In addition to barbecue charcoal, the charcoal might have potential to be used as biochar as a soil amendment. The PAH results can be exploited when planning the utilization of the products and for registration purposes needed in the commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bio-char Sequestration in Terrestrial Ecosystems – A Review
Lehmann, J., Gaunt, J., & Rondon, M. (2006) · Mitigation and Adaptation Strategies for Global Change · doi:10.1007/s11027-005-9006-5 · Cited by 3,053
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
(2010) · Joint Research Centre (European Commission) · doi:10.2788/472 · Cited by 851
One Step Forward toward Characterization: Some Important Material Properties to Distinguish Biochars
Schimmelpfennig, S., & Glaser, B. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0146 · Cited by 518
Cited by
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
Biochar based catalysts for the abatement of emerging pollutants: a review
Do Minh, T., Song, J., Deb, A., Cha, L., Srivastava, V., & Sillanpää, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124856 · Cited by 231
Pyrogenic carbon capture and storage
Schmidt, H., Anca‐Couce, A., Hagemann, N., Werner, C., Gerten, D., Lucht, W., & Kammann, C. (2019) · GCB Bioenergy · doi:10.1111/gcbb.12553 · Cited by 186
Biogeochemical potential of biomass pyrolysis systems for limiting global warming to 1.5 °C
Werner, C., Schmidt, H.-P., Gerten, D., Lucht, W., & Kammann, C. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aabb0e · Cited by 69
“For the purpose of the present study, we selected a standard so-called rotary kiln type slow pyrolysis system with a HTT of 450 ◦C and no reactive or inert gas injection (Fagernäs et al 2012, Peters et al 2017).”
Method
Metadata
- Authors
- Fagernäs, L., Kuoppala, E., & Simell, P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-11-02
- Volume
- 26
- Issue
- 11
- Pages
- 6960-6970
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2317217876
- Cited by
- 58
- References
- 5
- FWCI
- 1.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.