CO2 Capture with Activated Carbon Grafted by Nitrogenous Functional Groups
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Amino/nitro groups were introduced onto the surface of the activated carbon (AC) with nitration followed by reduction in order to improve its adsorption capacity toward CO 2 . These AC samples were characterized by N 2 adsorption/desorption, FTIR, and X-ray photoelectron spectroscopy (XPS). CO 2 adsorption properties of the samples were investigated using a self-regulating high-pressure adsorption apparatus. Results showed that the contents of nitrogen on the treated samples’ surface increased from 0% to 1.38 after modification. The maximum CO 2 adsorption capacity of the modified samples can reach 19.07 mmol/g at 298 K and 36.0 bar. The adsorbed amounts of CO 2 on all samples decreased with an increase in the adsorption temperature, but the extent of the decrease with the modified samples was less than that of the raw AC sample. CO 2 adsorption capacities of the modified sample for five cyclic adsorption–desorption runs were found to be nearly identical.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sorbents for CO2 capture from high carbon fly ashes
Mercedes Maroto-Valer, M., Lu, Z., Zhang, Y., & Tang, Z. (2008) · Waste Management · doi:10.1016/j.wasman.2007.10.012 · Cited by 189
Cited by
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Development of biochar as fuel and catalyst in energy recovery technologies
Waqas, M., Aburiazaiza, A. S., Miandad, R., Rehan, M., Barakat, M. A., & Nizami, A. S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.017 · Cited by 288
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
One-pot synthesis of digestate-derived biochar for carbon dioxide capture
Qiao, Y., Zhang, S., Quan, C., Gao, N., Johnston, C., & Wu, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.118525 · Cited by 78
CO2 capture over steam and KOH activated biochar: effect of relative humidity
Zhang, C., Sun, S., Xu, S., & Wu, C. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106608 · Cited by 69
“Although steam activation and KOH activation were accomplished by removing carbonaceous species from biochar to change biochar morphology [19], KOH could also adjust the pH of biochar adsorbents [44]; the introduction of alkaline species could enhance the absorption of CO 2 .”
Self-citation
Metadata
- Authors
- Zhang, C., Song, W., Sun, G., Xie, L., Wang, J., Li, K., Sun, C., Liu, H., Snape, C. E., & Drage, T.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-07-11
- Volume
- 27
- Issue
- 8
- Pages
- 4818-4823
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2319909752
- Cited by
- 77
- References
- 1
- FWCI
- 8.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.