The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Increased Thermal Conductivity of Eicosane-Based Composite Phase Change Materials in the Presence of Graphene Nanoplatelets
Abstract
Alkanes and their mixtures (paraffins) have widely been used as phase change materials (PCMs) for low-to-medium temperature thermal energy storage. Among the various alkanes, eicosane, with a nominal melting temperature of 37 °C, has emerged in energy-storage-based passive thermal management technologies, for electronics for example. In an effort to increase the thermal conductivity of eicosane, the effect of adding graphene nanoplatelets (GNPs) as thermally conductive nanofillers was investigated experimentally. The composite PCM samples were prepared by dispersing GNPs in liquid eicosane at various loadings (0, 1, 2, 5, and 10 wt.%) without any surfactants. Thermal conductivity of the composite PCM samples in their solid phase was then measured by means of the transient plane source technique at elevated temperatures from 10 to 35 °C. Latent heat of fusion and melting point of the samples were also characterized using a differential scanning calorimeter. It was shown that for the highest loading examined (10 wt.%), the relative thermal conductivity enhancement is above 400% at 10 °C, indicating that the emerging GNPs have much better performance than the conventional nanofillers attempted in the available literature, such as metal/oxide nanoparticles and carbon nanotubes. Reduced thermal interface resistance, related to the unique two-dimensional planar morphology of GNPs, was interpreted to be responsible for their superior performance. The matrix/filler thermal interface resistance was estimated to range from 6 × 10 –9 to 9 × 10 –9 m 2 K/W. In contrast to the markedly increased thermal conductivity, however, the penalty of decrease in the energy storage capacity, caused by the presence of GNPs, was shown to be less significant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Graphite Nanoplatelet−Epoxy Composite Thermal Interface Materials
Yu, A., Ramesh, P., Itkis, M. E., Bekyarova, E., & Haddon, R. C. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp071761s · Cited by 1,039
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Self-citationSarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
Self-citationFan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Self-citationSarı, A., & Karaipekli, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.057 · Cited by 469
Zhang, Z., Zhang, N., Peng, J., Fang, X., Gao, X., & Fang, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.014 · Cited by 454
Self-citation
Cited by
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Zhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700753 · Cited by 504
Eanest Jebasingh, B., & Valan Arasu, A. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.031 · Cited by 477
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Self-citationYang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.045 · Cited by 342
Wu, S., Li, T., Wu, M., Xu, J., Hu, Y., Chao, J., Yan, T., & Wang, R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05904h · Cited by 310
Self-citationYang, J., Qi, G.-Q., Bao, R.-Y., Yi, K., Li, M., Peng, L., Cai, Z., Yang, M.-B., Wei, D., & Yang, W. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.028 · Cited by 298
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Kalapala, L., & Devanuri, J. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.10.024 · Cited by 269
Li, M., & Mu, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.085 · Cited by 265
A state-of-the art review on advancing battery thermal management systems for fast-charging
Kumar Thakur, A., Sathyamurthy, R., Velraj, R., Saidur, R., Pandey, A. K., Ma, Z., Singh, P., Hazra, S. K., Wafa Sharshir, S., Prabakaran, R., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120303 · Cited by 263
Palacios, A., Cong, L., Navarro, M. E., Ding, Y., & Barreneche, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.020 · Cited by 237
Allahbakhsh, A., & Arjmand, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.04.009 · Cited by 180
Smart Utilization of Multifunctional Metal Oxides in Phase Change Materials
Chen, X., Tang, Z., Liu, P., Gao, H., Chang, Y., & Wang, G. (2020) · Matter · doi:10.1016/j.matt.2020.05.016 · Cited by 132
A review of the application of carbon materials in solar thermal energy storage
Badenhorst, H. (2019) · Solar Energy · doi:10.1016/j.solener.2018.01.062 · Cited by 123
Zhang, L., An, L., Wang, Y., Lee, A., Schuman, Y., Ural, A., Fleischer, A. S., & Feng, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.104 · Cited by 98
Experimental study on effective thermal conductivity of microcapsules based phase change composites
Wang, T., Wang, S., & Wu, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.068 · Cited by 72
Metadata
- Authors
- Fang, X., Fan, L.-W., Ding, Q., Wang, X., Yao, X.-L., Hou, J.-F., Yu, Z.-T., Cheng, G.-H., Hu, Y.-C., & Cen, K.-F.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-06-13
- Volume
- 27
- Issue
- 7
- Pages
- 4041-4047
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2322414444
- Cited by
- 261
- References
- 31
- FWCI
- 22.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.