The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Comparative Assessment of Wet Torrefaction
Abstract
Wet torrefaction of typical Norwegian biomass fuels was studied within the temperature window of 175–225 °C, using a benchtop autoclave reactor of 250 mL in volume from Parr Instrument. Two types of local biomass fuels were employed as feedstock, Norway spruce (softwood) and birch (hardwood). Effects of process parameters including pressure, reaction temperature, holding time, and feedstock particle size on the yield and properties of the solid products were investigated. It appears that birch wood is more reactive and produces less solid products than spruce wood in the same wet torrefaction conditions. Increasing pressure above the saturated vapor pressure of water enhances the torrefaction rate. Both reaction temperature and holding time have significant effects on solid product yield and fuel properties of wet torrefied biomass. The yield of solid products is slightly reduced with decreasing feedstock particle size. The ash content of biomass fuel is significantly reduced by wet torrefaction. In addition, a comparison between wet and dry torrefaction supported by regression analyses and numerical predictions shows that wet torrefaction can produce solid fuels with greater heating values at much lower temperatures and shorter holding times.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Wannapeera, J., Fungtammasan, B., & Worasuwannarak, N. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.010 · Cited by 348
An investigation of the grindability of two torrefied energy crops
Bridgeman, T. G., Jones, J. M., Williams, A., & Waldron, D. J. (2010) · Fuel · doi:10.1016/j.fuel.2010.06.043 · Cited by 319
Pretreatment and feeding of biomass for pressurized entrained flow gasification
Svoboda, K., Pohořelý, M., Hartman, M., & Martinec, J. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.12.005 · Cited by 192
Combined hydrothermal carbonization and gasification of biomass with carbon capture
Erlach, B., Harder, B., & Tsatsaronis, G. (2012) · Energy · doi:10.1016/j.energy.2012.01.057 · Cited by 109
Cited by
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction
Bach, Q.-V., & Skreiberg, Ø. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.014 · Cited by 431
Self-citationGhodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Arpia, A. A., Chen, W.-H., Lam, S. S., Rousset, P., & de Luna, M. D. G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126233 · Cited by 375
Metadata
- Authors
- Bach, Q.-V., Tran, K.-Q., Khalil, R. A., Skreiberg, Ø., & Seisenbaeva, G.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-10-31
- Volume
- 27
- Issue
- 11
- Pages
- 6743-6753
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2332449248
- Cited by
- 168
- References
- 5
- FWCI
- 6.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.