The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor
Abstract
Biomass catalytic fast pyrolysis can produce aromatics and olefins, which are used as petrochemicals. However, the yields of aromatics and olefins are still very low. In this work, catalytic co-pyrolysis of pine sawdust and plastics (polyethylene, polypropylene, and polystyrene) was conducted in a fluidized-bed reactor to improve the yields of aromatics and olefins. The effects of different temperatures, polyethylene/pine sawdust ratios, different catalysts, and plastics on the product distributions were studied. The results show there are some positive synergistic effects between the two feedstocks. The maximum carbon yield of petrochemicals (71%) was obtained at 600 °C with a spent fluidized catalytic cracking (FCC) catalyst and polyethylene/pine sawdust ratio of 4:1. LOSA-1 presents better catalytic performances than Al 2 O 3 and spent FCC catalysts. The petrochemical carbon yield with LOSA-1 is almost 2 times that without catalyst. Catalytic co-pyrolysis of polystyrene and pine sawdust produced the highest and lowest yields of aromatics (47%) and olefins (11.4%), respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Cited by
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Uzoejinwa, B. B., He, X., Wang, S., El-Fatah Abomohra, A., Hu, Y., & Wang, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.004 · Cited by 637
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
A review on alternative fuels in future energy system
Stančin, H., Mikulčić, H., Wang, X., & Duić, N. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109927 · Cited by 475
Pyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 285
Zheng, Y., Tao, L., Yang, X., Huang, Y., Liu, C., & Zheng, Z. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.04.001 · Cited by 283
Photocatalytic Conversion of Plastic Waste: From Photodegradation to Photosynthesis
Chu, S., Zhang, B., Zhao, X., Soo, H. S., Wang, F., Xiao, R., & Zhang, H. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200435 · Cited by 260
Self-citationEngamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Zhang, X., Lei, H., Zhu, L., Qian, M., Zhu, X., Wu, J., & Chen, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.071 · Cited by 178
Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158
Self-citationStančin, H., Šafář, M., Růžičková, J., Mikulčić, H., Raclavská, H., Wang, X., & Duić, N. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.07.023 · Cited by 94
Co-pyrolysis of lignin and plastics using red clay as catalyst in a micro-pyrolyzer
Patil, V., Adhikari, S., & Cross, P. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.034 · Cited by 68
Lin, X., Zhang, Z., Wang, Q., & Sun, J. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00861-4 · Cited by 43
Metadata
- Authors
- Zhang, H., Nie, J., Xiao, R., Jin, B., Dong, C., & Xiao, G.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-02-27
- Volume
- 28
- Issue
- 3
- Pages
- 1940-1947
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2319757924
- Cited by
- 194
- References
- 1
- FWCI
- 6.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.