Utilization of Surfactant-Stabilized Foam for Enhanced Oil Recovery by Adding Nanoparticles

Abstract

Nitrogen foam flooding is a promising technique for enhanced oil recovery, but instability of the foam limits its application. In this article, partially hydrophobic modified SiO 2 nanoparticles with an anionic surfactant, sodium dodecyl sulfate (SDS), were used together to increase foam stability. Micromodel flooding and sandpack flooding were adopted to assess the stability and effect on enhanced oil recovery of the SiO 2 stabilized foam (SiO 2 /SDS foam). The experimental data showed that the foam stability was decreased with an increase in temperature, while the foam volume was increased first and then decreased. SiO 2 /SDS foam showed better temperature tolerance than the SDS foam (foam stabilized by SDS) due to the adsorption of nanoparticles on the surface of the bubble. Almost all of the bubbles maintained spherical or ellipsoidal shape with prolonged time due to the enhanced surface dilational viscoelasticity, which was different from that of SDS foam. According to the micromodel flooding results, SiO 2 /SDS foam displaced more oil than brine flooding, SDS solution flooding, or SDS foam flooding. As the foam stability was enhanced, gas mobility and channeling were controlled effectively. In addition, more oil on the pore wall and in the dead-end pores was displaced out because of the higher viscoelasticity of the SiO 2 /SDS foam. The sandpack flooding results showed that the increase of differential pressure and profile control effect was a proportional function of the SiO 2 concentration in SiO 2 /SDS foam. The test with a higher SiO 2 concentration resulted in a higher oil recovery when SiO 2 concentration was less than 1.5 wt %.