Effect of Temperature, Pressure, and Residence Time on Pyrolysis of Pine in an Entrained Flow Reactor
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
High-pressure biomass gasification is poorly understood at heating rates of practical significance. This paper addresses this knowledge gap by performing pyrolysis of pine at high temperatures (600–1000 °C) and high pressures (5–20 bar) in an entrained flow reactor. Heating rates of 10 3 –10 4 °C/s are achieved with solids residence time ranging from 4 to 28 s. The pyrolysis chars, gases, and tars are characterized using several techniques: N 2 and CO 2 physisorption, elemental analyses, SEM, XRD, micro-GC, FTIR-MS, and GCxGC-TOF-MS. The evolution of gases at high pressure is studied by pyrolyzing pine in PTGA at 800 °C between 5 and 30 bar. Pyrolysis pressure, temperature, heating rate, and residence time dramatically influence the physical and chemical properties of char, mainly through differences in the release of volatiles, evolution of char morphology, and carbonization of the char skeleton. The surface area and pore properties of chars correlate with the development of graphite-like structures in the carbon matrix. The gas composition from both the PTGA and PEFR shows that CO, CO 2, H 2, and CH 4 are the major light gases evolved, whereas C 2 –C 4 hydrocarbons, oxygenates, and benzene are the minor light gas species observed. The formation of polynuclear aromatic tars at the longest residence times appears to occur via gas phase molecular weight growth reactions. The knowledge of char structure evolution developed in this paper will help us better understand char gasification kinetics which is important for the design of gasifiers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Thermal decomposition of milled wood lignins studied by thermogravimetry/mass spectrometry
Jakab, E., Faix, O., & Till, F. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00046-6 · Cited by 321
Guerrero, M., Ruiz, M. P., Millera, Á., Alzueta, M. U., & Bilbao, R. (2008) · Energy & Fuels · doi:10.1021/ef7005589 · Cited by 182
Product compositions and kinetics in the rapid pyrolysis of milled wood lignin
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a054 · Cited by 175
The oxidative reactivity of coal chars in relation to their structure
Chan, M.-L., Jones, J. M., Pourkashanian, M., & Williams, A. (1999) · Fuel · doi:10.1016/s0016-2361(99)00074-5 · Cited by 89
Hasan Khan Tushar, M. S., Mahinpey, N., Khan, A., Ibrahim, H., Kumar, P., & Idem, R. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.12.027 · Cited by 78
Cited by
Hu, X., & Gholizadeh, M. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.01.024 · Cited by 671
Current technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Use of biochar as carbon sequestering additive in cement mortar
Gupta, S., Kua, H. W., & Low, C. Y. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.12.009 · Cited by 527
Sharma, H. B., Sarmah, A. K., & Dubey, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109761 · Cited by 501
Chen, Y., Zhang, X., Chen, W., Yang, H., & Chen, H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.08.138 · Cited by 407
Gupta, S., & Kua, H. W. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001924 · Cited by 293
Application of biochar in concrete – A review
Senadheera, S. S., Gupta, S., Kua, H. W., Hou, D., Kim, S., Tsang, D. C. W., & Ok, Y. S. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105204 · Cited by 255
Valorisation of food waste via hydrothermal carbonisation and techno-economic feasibility assessment
Saqib, N. U., Sharma, H. B., Baroutian, S., Dubey, B., & Sarmah, A. K. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.06.484 · Cited by 177
You, S., Ok, Y. S., Tsang, D. C. W., Kwon, E. E., & Wang, C.-H. (2018) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1518860 · Cited by 149
“oxidization and reduction stages) and the stage is generally conducted from 200 to 700, 300 to 800, and 600 to 1600 °C for fixed bed, fluidized bed, and entrained flow reactors, respectively (Arena, 2012; Kim et al., 2012; Newalkar et al., 2014; Park et al., 2014; Patra & Sheth, 2015; Sanchez-Silva et al., 2012; Shen…”
BackgroundKlemetsrud, B., Eatherton, D., & Shonnard, D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02836 · Cited by 31
Metadata
- Authors
- Newalkar, G., Iisa, K., D’Amico, A. D., Sievers, C., & Agrawal, P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-08-04
- Volume
- 28
- Issue
- 8
- Pages
- 5144-5157
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2104824885
- Cited by
- 104
- References
- 6
- FWCI
- 4.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.