Effects of Aromatic Type and Concentration in Fischer−Tropsch Fuel on Emissions Production and Material Compatibility
The DOI matches its Crossref record.
Abstract
The use of synthetic fuels produced via the Fischer−Tropsch (FT) process is being considered for U.S. military applications as an approach to provide secure and stable fuel resources. Many potential operational benefits have been observed while employing this type of paraffinic fuel for aviation applications. However, operational limitations with respect to seal-swell and lubricity may need to be improved for ultimate implementation. Studies were performed to investigate the feasibility of adding aromatic solvents as an option to achieve “fit-for-purpose” (FFP) requirements. Aromatics are known to improve seal-swell characteristics, but also increase engine soot emissions. Three aromatic solvents, which encompass the molecular weight range typically found in military jet fuel (JP-8), were added both individually and as a blend to an FT fuel at varying concentrations. The seal-swell capability of the solvents was inferred using nitrile, fluorosilicone, and fluorocarbon O-rings while the solvent effect on combustion emissions was evaluated using a T63 engine. The studies showed that particulate matter (PM) emissions increased with increasing aromatic molecular weight and concentration, which was attributed to an increase in soot precursors. The seal-swell of nitrile rubber was most strongly affected by the addition of aromatics in the form of alkyl-naphthalenes as compared to alkyl-benzenes. This result was attributed to the decreasing molar volume and increasing polarity and hydrogen-bonding potential for the larger aromatics, primarily naphthalene and corresponding derivatives. Results showed that the desired swell characteristics and relatively low PM emissions can be achieved with the solvents evaluated in this study. The overall relation between PM emissions production and volume swell showed that all solvents considered had comparable dependence, which suggests that it may be possible to predict these interdependent variables. Overall, this study provided an initial assessment and basis for subsequent evaluations of potential feedstocks for blending in FT fuels to achieve FFP requirements. Future studies will evaluate additional elastomer materials and individual aromatic species while characterizing the emissions production on varying combustion platforms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Aviation gas turbine alternative fuels: A review
Blakey, S., Rye, L., & Wilson, C. W. (2011) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2010.09.011 · Cited by 576
Masiol, M., & Harrison, R. M. (2014) · Atmospheric Environment · doi:10.1016/j.atmosenv.2014.05.070 · Cited by 515
Biofuel blending reduces particle emissions from aircraft engines at cruise conditions
Moore, R. H., Thornhill, K. L., Weinzierl, B., Sauer, D., D’Ascoli, E., Kim, J., Lichtenstern, M., Scheibe, M., Beaton, B., Beyersdorf, A. J., et al. (2017) · Nature · doi:10.1038/nature21420 · Cited by 414
Chemical, thermal stability, seal swell, and emissions studies of alternative jet fuels
Corporan, E., Edwards, T., Shafer, L., DeWitt, M. J., Klingshirn, C., Zabarnick, S., West, Z., Striebich, R., Graham, J., & Klein, J. (2011) · Energy & Fuels · doi:10.1021/ef101520v · Cited by 315
Self-citationAn overview on performance characteristics of bio-jet fuels
Yang, J., Xin, Z., He, Q. (., Corscadden, K., & Niu, H. (2019) · Fuel · doi:10.1016/j.fuel.2018.10.079 · Cited by 303
Lahijani, P., Mohammadi, M., Mohamed, A. R., Ismail, F., Lee, K. T., & Amini, G. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115956 · Cited by 269
Producing jet fuel from biomass lignin: Potential pathways to alkyl-benzenes and cycloalkanes
Cheng, F., & Brewer, C. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.030 · Cited by 268
Alternative jet fuel feasibility
Hileman, J. I., & Stratton, R. W. (2014) · Transport Policy · doi:10.1016/j.tranpol.2014.02.018 · Cited by 166
Brem, B. T., Durdina, L., Siegerist, F., Beyerle, P., Bruderer, K., Rindlisbacher, T., Rocci-Denis, S., Andac, M. G., Zelina, J., Penanhoat, O., et al. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b04167 · Cited by 140
Timko, M. T., Herndon, S. C., de la Rosa Blanco, E., Wood, E. C., Yu, Z., Miake-Lye, R. C., Knighton, W. B., Shafer, L., DeWitt, M. J., & Corporan, E. (2011) · Combustion Science and Technology · doi:10.1080/00102202.2011.581717 · Cited by 69
“The few studies that have been reported on alternative fuel combustion in aircraft gas turbine engines (Corporan et al., 2005, 2007, 2011; DeWitt et al., 2008) indicate substantial PM emissions reductions when FT fuels replace Jet A or JP-8 jet fuel.”
BackgroundSelf-citationCain, J., DeWitt, M. J., Blunck, D., Corporan, E., Striebich, R., Anneken, D., Klingshirn, C., Roquemore, W. M., & Vander Wal, R. (2013) · Energy & Fuels · doi:10.1021/ef400009c · Cited by 65
Self-citation
Metadata
- Authors
- DeWitt, M. J., Corporan, E., Graham, J., & Minus, D.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-06-10
- Volume
- 22
- Issue
- 4
- Pages
- 2411-2418
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1965580591
- Cited by
- 130
- References
- 0
- FWCI
- 4.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.