CoChat

Catalytic Fast Pyrolysis of Biomass in a Fluidized Bed with Fresh and Spent Fluidized Catalytic Cracking (FCC) Catalysts

Zhang, Huiyan, Xiao, Rui, Wang, Denghui, Zhong, Zhaoping, Song, Min, Pan, Qiwen, He, Guangying · 2009 · Energy & Fuels

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

The conversion of biomass into bio-oil using fast pyrolysis technology is one of the most promising alternatives to convert biomass into liquid products. However, substituting bio-oil for conventional petroleum fuels directly may be problematic because of the high viscosity, high oxygen content, and strong thermal instability of bio-oil. The focus of the current research is decreasing the oxygen and polymerization precursor content of the obtained bio-oil to improve its thermal stability and heating value. Catalytic fast pyrolysis of corncob with different percentages (5, 10, 20, and 30% by volume) of fresh fluidized catalytic cracking (FCC) catalyst (FC) and spent FCC catalyst (SC) in bed materials was conducted in a fluidized bed. The effects of the catalysts on the pyrolysis product yields and chemical composition of the bio-oil were investigated. A greater catalyst percentage lead to a lower bio-oil yield, while a lower catalyst percentage lead to little change of the composition of the bio-oil. The best percentages of FC and SC were 10 and 20%, respectively. FC showed more catalytic activation in converting oxygen into CO, CO 2, and H 2 O than SC, but the oil fraction yield with FC was remarkably lower than that with SC because of more coke formation. The gas chromatography/mass spectrometry (GC/MS) analysis of the collected liquid in the second condenser showed that the most likely polymerization precursors, such as 2-methoxy-phenol, 2-methoxy-4-methyl-phenol, 4-ethyl-2-methoxy-phenol, 2-methoxy-4-vinylphenol, and 2,6-dimethoxy-phenol decreased, while monofunctional phenols, ketones, and furans increased compared to that in the noncatalytic experiment. The hydrocarbons increased with the increase of the catalyst percentages, and this contributed to the decrease of the oxygen content of the bio-oil. Multi-stage condensation achieved a good separation of the oil fraction and water.

Overview

Integrity signals

Registry

Crossref · 10.1021/ef900720m

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 2 references

Cited by

See all 151

Metadata

Authors
Zhang, H., Xiao, R., Wang, D., Zhong, Z., Song, M., Pan, Q., & He, G.
Affiliations
Southeast University (CN)
Corresponding author
Xiao, Rui
Venue
Energy & Fuels
Published
2009-12-17
Volume
23
Issue
12
Pages
6199-6206
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2004787911
Cited by
149
References
2
Citations by year
2026: 5 · 2025: 3 · 2024: 2 · 2023: 5 · 2022: 7 · 2021: 10 · 2020: 5 · 2019: 13 · 2018: 15 · 2017: 4 · 2016: 6 · 2015: 12 · 2014: 9 · 2013: 19 · 2012: 15
FWCI
6.81
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysis for Biomass Conversion
Keywords
catalytic fast pyrolysis, biomass, bio-oil upgrading, fluidized bed reactor, spent FCC catalyst, corn cob, oxygen removal, coke formation, phenols, hydrocarbons, thermal stability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.