Study on Deposits on the Surface, Upstream, and Downstream of Bag Filters in a 12 MW Biomass-Fired Boiler
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Deposits on the surface, upstream, and downstream of bag filters in a 12 MW biomass-fired grate furnace in China were collected, sampled, and analyzed by X-ray fluorescence (XRF) and X-ray powder diffractometry (XRD). Major elements in the surface and upstream deposits were Si, Ca, K, Cl, S, and Na; the share of Al, P, Mg, and Fe was relatively poor. In comparison to the upstream deposits, the high concentrations of K, Na, Cl, and S in the surface deposits were indicative of the formation of sub-micrometer particles in the boiler, which were subsequently captured on the bag filters. However, high concentrations of Si, Al, and Ca in the upstream deposits could trap chloride via the formation of aluminosilicate and calcium chloride. In addition, the relatively lower contents of K, Na, Cl, and S in the upstream deposits went against the formation of sub-micrometer particles and led to upstream deposits that were more like an aggregate of fly ash and unlike the surface deposits, which were as hard as stone and adhered to the surface of bag filters when flue gas passed through the bag filters. XRD analysis further proved the above results. The intensity of sylvine and halite phases in surface deposits were significantly higher than those in the upstream deposits, and the intensitise of quartz and berlinite phases in the surface deposits were obviously lower than those in the upstream deposits. Higher contents of sylvine and halite as well as lower contents of quartz and berlinite in the surface were indicative of the formation of sintered ash in the boiler. Then, it adhered to the surface of the bag filters. At the exit of bag filters, a mysterious substance evinced as NH 4 Cl by XRD was generated by the recombination reaction of NH 3 (g) and HCl (g) at the outlet temperature of bag filters. The purity of NH 4 Cl was almost 100%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alkali Metal Emission during Pyrolysis of Biomass
Olsson, J. G., Jäglid, U., Pettersson, J. B. C., & Hald, P. (1997) · Energy & Fuels · doi:10.1021/ef960096b · Cited by 261
Influence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195
Westberg, H. M., Byström, M., & Leckner, B. (2003) · Energy & Fuels · doi:10.1021/ef020060l · Cited by 105
Davidsson, K. O., Åmand, L.-E., Leckner, B., Kovacevik, B., Svane, M., Hagström, M., Pettersson, J. B. C., Pettersson, J., Asteman, H., Svensson, J.-E., et al. (2007) · Energy & Fuels · doi:10.1021/ef060306c · Cited by 92
Deposit formation on a single cylinder during combustion of herbaceous biomass
Kaufmann, H. (2000) · Fuel · doi:10.1016/s0016-2361(99)00137-4 · Cited by 52
Cited by
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Self-citationNiu, Y., Zhu, Y., Tan, H., Hui, S., Jing, Z., & Xu, W. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.07.038 · Cited by 121
Self-citationShort Review on the Origin and Countermeasure of Biomass Slagging in Grate Furnace
Zhu, Y., Niu, Y., Tan, H., & Wang, X. (2014) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00007 · Cited by 54
Self-citationA calculation method of biomass slagging rate based on crystallization theory
Niu, Y., Zhu, Y., Tan, H., Hui, S., Jones, J. M., & Liu, Y. (2014) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1775 · Cited by 8
Self-citation
Metadata
- Authors
- Niu, Y., Tan, H., Wang, X., Liu, Z., Liu, Y., & Xu, T.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-21
- Volume
- 24
- Issue
- 3
- Pages
- 2127-2132
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2092156315
- Cited by
- 40
- References
- 5
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.