The DOI matches its Crossref record.
Thermal Cracking of Canola Oil: Reaction Products in the Presence and Absence of Steam
Abstract
The product distribution obtained from the thermal cracking of canola oil was studied at atmospheric pressure in a fixed-bed reactor in the temperature range 300−500 °C and gas hourly space velocity (GHSV) in the range 3.3−640 h - 1 over inert materials and in the presence and absence of steam. Results showed that canola oil conversions were high (54−100 wt %) and depended strongly on the operating variables. Products essentially consisted of C 4 and C 5 hydrocarbons, aromatic and C 6 + aliphatic hydrocarbons, and C 2 -C 4 olefins, as well as a diesel-like fuel fraction and hydrogen. GC−MS analyses showed that product distribution as well as the lengths of the carbon chain of hydrocarbons and oxygenated hydrocarbons depended strongly not only on the cracking temperature and space velocity but also on whether cracking was conducted in the presence or absence of steam. On the other hand, cracking over inert materials showed that both conversion and product distribution were completely independent of morphology of the cracking surface. A reaction scheme has been proposed to account for the product distribution obtained from the thermal cracking of canola oil. The observed changes in both canola oil conversion and product distribution with changes in the operating variables were found to be consistent with the reaction scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pyrolysis of triglyceride materials for the production of renewable fuels and chemicals
Maher, K. D., & Bressler, D. C. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.10.025 · Cited by 658
Progress in waste oil to sustainable energy, with emphasis on pyrolysis techniques
Lam, S. S., Liew, R. K., Jusoh, A., Chong, C. T., Ani, F. N., & Chase, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.005 · Cited by 355
Pyrolysis of microalgae: A critical review
Yang, C., Li, R., Zhang, B., Qiu, Q., Wang, B., Yang, H., Ding, Y., & Wang, C. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.012 · Cited by 345
Diesel-like fuel obtained by pyrolysis of vegetable oils
Lima, D. G., Soares, V. C. D., Ribeiro, E. B., Carvalho, D. A., Cardoso, É. C. V., Rassi, F. C., Mundim, K. C., Rubim, J. C., & Suarez, P. A. Z. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.12.008 · Cited by 321
Hydroprocessed rapeseed oil as a source of hydrocarbon-based biodiesel
Šimáček, P., Kubička, D., Šebor, G., & Pospíšil, M. (2009) · Fuel · doi:10.1016/j.fuel.2008.10.022 · Cited by 281
Integrated diesel production from lignocellulosic sugars via oleaginous yeast
Sànchez i Nogué, V., Black, B. A., Kruger, J. S., Singer, C. A., Ramirez, K. J., Reed, M. L., Cleveland, N. S., Singer, E. R., Yi, X., Yeap, R. Y., et al. (2018) · Green Chemistry · doi:10.1039/c8gc01905c · Cited by 76
Metadata
- Authors
- Idem, R. O., Katikaneni, S. P. R., & Bakhshi, N. N.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 1996-01-01
- Volume
- 10
- Issue
- 6
- Pages
- 1150-1162
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2037565096
- Cited by
- 221
- References
- 0
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.