Lab-Scale Investigations of High-Temperature Corrosion Phenomena in Straw-Fired Boilers
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The corrosion of superheater tube material in straw-fired boilers was investigated in the laboratory. Metal test elements of boiler tube steel (X20CRMV121 and AISI 347FG) were covered with synthetic (KCl and/or K 2 SO 4 ) and real deposits, and exposed to a synthetic flue gas (6 vol % O 2, 12 vol % CO 2, 400 ppmv HCl, 60 ppmv SO 2, balance N 2 ) in 550 °C electrically heated ovens. Exposure times from 1 week to 5 months were used. The corrosion of the metal test elements was, in general, quite uniform, and the corrosion products consisted mainly of oxides of iron and chromium. All test elements covered with KCl suffered from minor internal attack, and some elements had severe pits with chlorine found in the pit. A dense layer of potassium sulfate and iron oxide was found adjacent to the metal oxide layers on all the metal test elements covered with a deposit containing KCl. The layer had a characteristic structure, with iron oxide threads in a dense potassium sulfate matrix. A mechanism for chlorine corrosion is suggested. The mechanism is based on gaseous chlorine attack coupled with a fast sulfation of KCl to K 2 SO 4 in a melt of KCl, K 2 SO 4, and iron compounds formed adjacent to the metal. Aspects of the sulfation of potassium chloride to potassium sulfate are discussed in the paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
Self-citationInfluence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195
Self-citationSulfation of Potassium Chloride at Combustion Conditions
Iisa, K., Lu, Y., & Salmenoja, K. (1999) · Energy & Fuels · doi:10.1021/ef990057a · Cited by 169
The Effect of SO 2 and NaCl on High Temperature Hot Corrosion
McKee, D. W., Shores, D. A., & Luthra, K. L. (1978) · Journal of The Electrochemical Society · doi:10.1149/1.2131463 · Cited by 77
Research works printed but not linked: 21
- Miles T. R., 1995, Golden, CO 80401-3393
- Jensen P. S., 1997, Energy Fuels, 11, 1055, 10.1021/ef960154t · DOI · Paper page
- Fujikawa H., 1986, Mater. Sci. Eng., 120, 306
- Larsen O. H., 1996, Proceedings from Power Plant Chemical Technology
- Henriksen N., 1995, VGB Conference, Corrosion and Corrosion Protection in Power Plants, Essen, November 29 and 30
- Hansen P. F. B., 1996, Fifth International Conference on Circulating Fluidized Beds, May 28−June 1, 1996
- Andersen K. A., 1989, Metallurgi for ingeniører; Akademisk forlag, 87
- Levenspiel O., 1972, Chemical Reaction Engineering
- Henriksen N., 1996, Proceedings from Power Plant Chemical Technology
- Fielder W. L., 1984, SO2, and O2. J. Electrochem. Soc.: Solid-State Sci. Technol.
- Pinch H. L., 1957, J. Am. Chem. Soc., 79, 6149, 10.1021/ja01580a012 · DOI
- Daniel P. L., Halogen Corrosion of Metals Advances in Corrosion Science and Technology, 172
- Kim A. S., 1990, Corrosion, 46, 755, 10.5006/1.3585178 · doi:10.5006/1.3585178
- Lee S. Y., 1991, Formation of Condensed Chlorides During Mixed Oxidation-Chlorination of Iron at 1000 K Corrosion
- Haanappel V. A. C., 1992, Corrosion, 48, 821
- Chu H., 1993, Corrosion Sci., 35, 1098
- Vaugham D. A., 1977, Proceedings of the International Conference on Ash Deposits and Corrosion From Impurities in Combustion Gases
- Salmenoja K., 1996, J. Inst. Energy, 69, 162
- Gotthjælp K., 1997, High-Temperature Corrosion in Biomass Incineration Plants. Final Report: EFP 95 Project No. 1323/95-0008
- Miller P. D., 1972, Corrosion NACE, 28, 281
- Rapp R. A, 1986, Corrosion, 42, 577
Cited by
The implications of chlorine-associated corrosion on the operation of biomass-fired boilers
Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., & Baxter, L. L. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00003-4 · Cited by 785
Self-citationObernberger, I., & Thek, G. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.07.006 · Cited by 764
Grate-firing of biomass for heat and power production
Yin, C., Rosendahl, L. A., & Kær, S. K. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.05.002 · Cited by 505
Deposition of potassium salts on heat transfer surfaces in straw-fired boilers: a pilot-scale study
Nielsen, H. P., Baxter, L. L., Sclippab, G., Morey, C., Frandsen, F. J., & Dam-Johansen, K. (2000) · Fuel · doi:10.1016/s0016-2361(99)00090-3 · Cited by 202
Self-citationInfluence of deposit formation on corrosion at a straw-fired boiler
Hansen, L. A., Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., Hørlyck, S., & Karlsson, A. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(00)00063-1 · Cited by 195
Self-citationKCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Pilot-Scale Investigation of the Influence of Coal−Biomass Cofiring on Ash Deposition
Robinson, A. L., Junker, H., & Baxter, L. L. (2002) · Energy & Fuels · doi:10.1021/ef010128h · Cited by 159
Skrifvars, B.-J., Backman, R., Hupa, M., Salmenoja, K., & Vakkilainen, E. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.01.010 · Cited by 155
Alkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2
Karlsson, S., Pettersson, J., Johansson, L. G., & Svensson, J. E. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9293-7 · Cited by 118
Westberg, H. M., Byström, M., & Leckner, B. (2003) · Energy & Fuels · doi:10.1021/ef020060l · Cited by 105
Bai, M., Reddy, L., & Hussain, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.02.047 · Cited by 81
Jonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76
Skrifvars, B.-J., Westén-Karlsson, M., Hupa, M., & Salmenoja, K. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.11.026 · Cited by 70
Corrosion Problems in Incinerators and Biomass-Fuel-Fired Boilers
Mudgal, D., Singh, S., & Prakash, S. (2014) · International Journal of Corrosion · doi:10.1155/2014/505306 · Cited by 56
Pettersson, C., Johansson, L.-G., & Svensson, J.-E. (2008) · Oxidation of Metals · doi:10.1007/s11085-008-9118-x · Cited by 40
Condensation Behaviors of Potassium during Biomass Combustion
Jin, X., Ye, J., Deng, L., & Che, D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03381 · Cited by 37
The Influence of Sulfur Additions on the Corrosive Environments in a Waste-Fired CFB Boiler
Pettersson, J., Pettersson, C., Folkeson, N., Johansson, L. G., Skog, E., & Svensson, J. E. (2006) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.522-523.563 · Cited by 31
Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
Self-citationOksa, M., Varis, T., & Ruusuvuori, K. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.04.025 · Cited by 26
Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01232 · Cited by 24
Self-citationDeposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements
Laxminarayan, Y., Jensen, P. A., Wu, H., Frandsen, F. J., Sander, B., & Glarborg, P. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01312 · Cited by 23
“Most of the corrosion products form a complex eutectic mixture with the components present in the deposit [10].”
BackgroundSelf-citationThe effect of Cl, Br, and F on high-temperature corrosion of heat-transfer alloys
Eriksson, J.-E., Lehmusto, J., Dirbeba, M., Silvander, L., Lindberg, D., & Hupa, L. (2023) · Fuel · doi:10.1016/j.fuel.2023.128516 · Cited by 15
“Typically in cases with iron- and chromium-based alloys, the rate of corrosion is controlled by the diffusion of gaseous species through the oxide layer and follows the parabolic rate law [20].”
Background
Metadata
- Authors
- Nielsen, H. P., Frandsen, F. J., & Dam-Johansen, K.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-10-22
- Volume
- 13
- Issue
- 6
- Pages
- 1114-1121
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2010713656
- Cited by
- 112
- References
- 5
- FWCI
- 9.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.