The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Bed Agglomeration Characteristics during Fluidized Bed Combustion of Biomass Fuels
Abstract
The in-bed behavior of ash-forming elements in fluidized bed combustion (FBC) of different biomass fuels was examined by SEM/EDS analysis of samples collected during controlled agglomeration test runs. Eight fuels were chosen for the test. To cover the variations in biomass characteristics and to represent as many combinations of ash-forming elements in biomass fuels as possible, the selection was based on a principal-component analysis of some 300 biomass fuels, with respect to ash-forming elements. The fuels were then combusted in a bench-scale fluidized bed reactor (5 kW), and their specific agglomeration temperatures were determined. Bed samples were collected throughout the tests, and coatings and necks formed were characterized by SEM/EDS analyses. On the basis of their compositions, the corresponding melting behaviors were determined, using data extracted from phase diagrams. The bench-scale reactor bed samples were finally compared with bed samples collected from biomass-fired full-scale fluidized bed boilers. In all the analyzed samples, the bed particles were coated with a relatively homogeneous ash layer. The compositions of these coatings were most commonly constricted to the ternary system K 2 O−CaO−SiO 2 . Sulfur and chlorine were further found not to “participate” in the agglomeration mechanism. The estimated melting behavior of the bed coating generally correlated well with the measured agglomeration temperature, determined in the 5 kW bench-scale fluidized bed reactor. Thus, the results indicate that partial melting of the coating of the bed particles would be directly responsible for the agglomeration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cross-Validatory Estimation of the Number of Components in Factor and Principal Components Models
Wold, S. (1978) · Technometrics · doi:10.1080/00401706.1978.10489693 · Cited by 2,601
Chemical elemental characteristics of biomass fuels
Nordin, A. (1994) · Biomass and Bioenergy · doi:10.1016/0961-9534(94)e0031-m · Cited by 239
Self-citationManzoori, A. R., & Agarwal, P. K. (1992) · Fuel · doi:10.1016/0016-2361(92)90148-h · Cited by 102
A New Method for Quantification of Fluidized Bed Agglomeration Tendencies: A Sensitivity Analysis
Öhman, M. C., & Nordin, A. (1998) · Energy & Fuels · doi:10.1021/ef970049z · Cited by 93
Self-citationControl of in-bed agglomeration by fuel blending in a pilot scale straw and wood fueled AFBC
Salour, D., Jenkins, B. M., Vafaei, M., & Kayhanian, M. (1993) · Biomass and Bioenergy · doi:10.1016/0961-9534(93)90033-z · Cited by 69
Manzoori, A. R., & Agarwal, P. K. (1993) · Fuel · doi:10.1016/0016-2361(93)90310-x · Cited by 59
Cited by
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Kleinhans, U., Wieland, C., Frandsen, F. J., & Spliethoff, H. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.02.001 · Cited by 487
Agglomeration in fluidized beds at high temperatures: Mechanisms, detection and prevention
Bartels, M., Lin, W., Nijenhuis, J., Kapteijn, F., & van Ommen, J. R. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.04.002 · Cited by 387
Critical review of the role of ash content and composition in biomass pyrolysis
Puri, L., Hu, Y., & Naterer, G. (2024) · Frontiers in Fuels · doi:10.3389/ffuel.2024.1378361 · Cited by 226
Mechanisms and mitigation of agglomeration during fluidized bed combustion of biomass: A review
Morris, J. D., Daood, S. S., Chilton, S., & Nimmo, W. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.098 · Cited by 170
Metadata
- Authors
- Öhman, M., Nordin, A., Skrifvars, B.-J., Backman, R., & Hupa, M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-01-01
- Volume
- 14
- Issue
- 1
- Pages
- 169-178
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2004368084
- Cited by
- 292
- References
- 6
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.