The DOI matches its Crossref record.
High Tar Reduction in a Two-Stage Gasifier
Abstract
The work with a 100-kW th two-stage gasifier at the Technical University of Denmark (DTU) has resulted in a gas with a very low tar content. The reduction in tar has come about by combining the partial oxidation of the pyrolysis gas with the reactions that follow on a charcoal bed in the char gasification unit. Tar is defined as organic contaminants which have retention times equal to or greater than those of phenol on a nonpolar GC column. Two test series were made with wood chips as feedstock, before and after the gasifier was optimized. The effect on tar reduction of a charcoal bed has been investigated by measuring the tar content and composition of the gas after the partial oxidation (above the charcoal bed) and after the passage of the gas through the charcoal. By introducing the correct supply of air, the tar content in the gas after its partial oxidation was about 3000 mg/kg dry wood chips. Furthermore, a conclusive high tar reduction of the aromatic hydrocarbons including PAH was obtained by avoiding bypasses of the charcoal bed. A gas was produced with a tar content as low as 10−40 mg/kg dry wood.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
A review of the primary measures for tar elimination in biomass gasification processes
Devi, L., Ptasinski, K. J., & Janssen, F. J. J. G. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00102-2 · Cited by 1,435
Overview of recent advances in thermo-chemical conversion of biomass
Zhang, L., Xu, C. (., & Champagne, P. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.11.038 · Cited by 1,217
Progress in biofuel production from gasification
Sikarwar, V. S., Zhao, M., Fennell, P. S., Shah, N., & Anthony, E. J. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.04.001 · Cited by 724
New concepts in biomass gasification
Heidenreich, S., & Foscolo, P. U. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.06.002 · Cited by 709
Biomass gasification for electricity generation: Review of current technology barriers
Ruiz, J. A., Juárez, M. C., Morales, M. P., Muñoz, P., & Mendívil, M. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.021 · Cited by 627
A review of cleaning technologies for biomass-derived syngas
Woolcock, P. J., & Brown, R. C. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.02.036 · Cited by 623
Experimental comparison of biomass chars with other catalysts for tar reduction
Abu El-Rub, Z., Bramer, E. A., & Brem, G. (2008) · Fuel · doi:10.1016/j.fuel.2008.01.004 · Cited by 446
A comprehensive review of primary strategies for tar removal in biomass gasification
Cortazar, M., Santamaria, L., Lopez, G., Alvarez, J., Zhang, L., Wang, R., Bi, X., & Olazar, M. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116496 · Cited by 390
Effects of metal catalysts on CO2 gasification reactivity of biomass char
Huang, Y., Yin, X., Wu, C., Wang, C., Xie, J., Zhou, Z., Ma, L., & Li, H. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2009.04.013 · Cited by 341
The design, construction and operation of a 75kW two-stage gasifier
Henriksen, U., Ahrenfeldt, J., Jensen, T. K., Gøbel, B., Bentzen, J. D., Hindsgaul, C., & Sørensen, L. H. (2006) · Energy · doi:10.1016/j.energy.2005.05.031 · Cited by 279
Self-citationCatalytic upgrading of coal pyrolysis tar over char-based catalysts
Han, J., Wang, X., Yue, J., Gao, S., & Xu, G. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.033 · Cited by 200
Metadata
- Authors
- Brandt, P., Larsen, E., & Henriksen, U.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-07-01
- Volume
- 14
- Issue
- 4
- Pages
- 816-819
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2042862349
- Cited by
- 185
- References
- 0
- FWCI
- 2.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.