The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
Abstract
Molecular-scale surface roughness and charge heterogeneity have been hypothesized as factors that can affect the deposition rates of colloids during their transport in porous media. To test their relative importance, a single batch of cleaned glass beads was divided in half and chemically treated with acid or base to alter surface roughness. Analysis of the topography of 20 glass beads with an atomic force microscope (AFM) indicated that the chromic acid-treated (rough) beads had a root-mean-square roughness of 38.1 +/- 3.9 nm, while the sodium hydroxide-treated (smooth) beads had root-mean-square surface roughness of 15.0 +/- 1.9 nm. AFM force volume imaging of glass bead surfaces did not reveal surface charge heterogeneity. Filtration experiments with inorganic colloids (latex microspheres, 1 microm diameter) consistently demonstrated that there was a greater retention of latex microspheres on rough than smooth glass beads suspended in either low (10(-5) M) or higher (10(-1) M) ionic strength (IS) solutions. Collision efficiencies for rough beads were 30-50% larger than for smooth beads. Collision efficiencies of bacteria using rough glass beads were also equal to or greater than those measured for smooth beads. In experiments with the perchlorate-reducing bacterial isolate KJ, collision efficiencies were significantly greater on rough rather than smooth beads for two different ionic strength solutions (IS = 0.05 or 1 M). In another case (IS = 0.1 M) for KJ, and in filtration experiments with E coli, collision efficiencies were not significantly different between the rough and smooth beads. We hypothesize that the consistently greater deposition rates of microspheres, but not bacteria, on rough rather than smooth beads are due in part to the presence of polymers on the surfaces of bacteria.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The surface roughness of material spheres we evaluated here only included relatively smooth surfaced materials (<1 μm roughness)32, 33.”
From Size- and shape-dependent foreign body immune response to materials implanted in rodents and non-human primates (2015) · cites this paper as [33]
Citations
Cites
Direct measurement of colloidal forces using an atomic force microscope
Ducker, W. A., Senden, T. J., & Pashley, R. M. (1991) · Nature · doi:10.1038/353239a0 · Cited by 2,075
Cleveland, J. P., Manne, S., Bocek, D., & Hansma, P. K. (1993) · Review of Scientific Instruments · doi:10.1063/1.1144209 · Cited by 1,642
Trajectory analysis of deep‐bed filtration with the sphere‐in‐cell porous media model
Rajagopalan, R., & Tien, C. (1976) · AIChE Journal · doi:10.1002/aic.690220316 · Cited by 786
Elimelech, M., Zhu, X., Childress, A. E., & Hong, S. (1997) · Journal of Membrane Science · doi:10.1016/s0376-7388(96)00351-1 · Cited by 608
Kinetics of deposition of colloidal particles in porous media
Elimelech, M., & O'Melia, C. R. (1990) · Environmental Science & Technology · doi:10.1021/es00080a012 · Cited by 548
DLVO Interaction between Rough Surfaces
Bhattacharjee, S., Ko, C.-H., & Elimelech, M. (1998) · Langmuir · doi:10.1021/la971360b · Cited by 377
Physical and chemical factors influencing transport of microorganisms through porous media
Fontes, D. E., Mills, A. L., Hornberger, G. M., & Herman, J. S. (1991) · Applied and Environmental Microbiology · doi:10.1128/aem.57.9.2473-2481.1991 · Cited by 339
Dimension of weather and climate attractors
Lorenz, E. N. (1991) · Nature · doi:10.1038/353241a0 · Cited by 291
Probing Bacterial Electrosteric Interactions Using Atomic Force Microscopy
Camesano, T. A., & Logan, B. E. (2000) · Environmental Science & Technology · doi:10.1021/es9913176 · Cited by 263
Self-citationCamesano, T. A., & Logan, B. E. (1998) · Environmental Science & Technology · doi:10.1021/es970996m · Cited by 257
Self-citation
Research works printed but not linked: 15
- Gannon J. T., 1991, Appl. Environ. Microbiol., 57, 193
- Li Q., 1999, Water Res., 33, 1100
- DeFluan M. F., 1990, Appl. Environ. Microbiol., 56, 119
- Mills A. L., 1994, Appl. Environ. Microbiol., 60, 3306
- Johnson W. P., 1995, Water Resour. Res., 31, 2658
- Walz J. Y., 1998, J. Colloid Inter. Sci., 74, 168
- Zhu X., 1997, Environ. Sci. Technol., 31, 3662
- Liu A., 2000, Colloids Surf. A: Physicochem. Engin. Aspects, 174, 252
- Vigeant M. A. S., 1997, Appl. Environ. Microbiol., 63, 3479
- Mulvaney P. M. M.S., 2000, The Pennsylvania State University
- Logan B. E., 1995, J. Environ. Eng., 121, 873
- Yao K.-M., 1971, Environ. Sci. Technol., 5, 1112
- van Loosdrecht M. C. M., 1987, Appl. Environ. Microbiol., 53, 1901
- Amro N. A., 2000, Langmuir, 16, 2796
- Ong Y.-L., 1999, Langmuir, 15, 2725
Cited by
Items 101–200 of 261
Characterizing NF and RO membrane surface heterogeneity using chemical force microscopy
Brant, J. A., Johnson, K. M., & Childress, A. E. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.01.024 · Cited by 45
Influence of reducers on nanostructure and surface energy of silver coatings and bacterial adhesion
Shao, W., & Zhao, Q. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.10.015 · Cited by 44
Darbha, G. K., Fischer, C., Michler, A., Lützenkirchen, J., Schäfer, T., Heberling, F., & Schild, D. (2012) · Langmuir · doi:10.1021/la3003146 · Cited by 44
Liang, Y., Zhou, J., Dong, Y., Klumpp, E., Šimůnek, J., & Bradford, S. A. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.113803 · Cited by 45
“In contrast, the surface of natural porous media exhibits pronounced roughness, which can be as high as several hundreds of nanometers or micrometers for a sand surface (Shellenberger and Logan, 2002; Shen et al., 2011; Konopinski et al., 2012; Jin et al., 2015; Rasmuson et al., 2017; Johnson et al., 2018; Rasmuson et…”
BackgroundTrauscht, J., Pazmiño, E., & Johnson, W. P. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b02369 · Cited by 45
Synergies of media surface roughness and ionic strength on particle deposition during filtration
Jin, C., Zhao, W., Normani, S. D., Zhao, P., & Emelko, M. B. (2017) · Water Research · doi:10.1016/j.watres.2017.02.010 · Cited by 42
“This 336 type of decreased particle deposition associated with rougher surfaces has also been reported by 337 others (Shellenberger & Logan 2002; Morales et al. 2009; Chen et al. 2010), though far less 338 frequently than enhanced deposition; thus, they have been described as “exceptions.””
BackgroundZhang, M., Hou, J., Xia, J., Wu, J., Miao, L., & Ji, D. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132569 · Cited by 41
Straining phenomena in bacteria transport through natural porous media
Díaz, J., Rendueles, M., & Dı́az, M. (2009) · Environmental Science and Pollution Research · doi:10.1007/s11356-009-0160-2 · Cited by 41
Site-Specific Retention of Colloids at Rough Rock Surfaces
Darbha, G. K., Fischer, C., Lützenkirchen, J., & Schäfer, T. (2012) · Environmental Science & Technology · doi:10.1021/es301969m · Cited by 41
Cail, T. L., & Hochella, M. F. (2005) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2005.01.017 · Cited by 41
Pore-Scale Study of Flow Rate on Colloid Attachment and Remobilization in a Saturated Micromodel
Zhang, Q., Raoof, A., & Hassanizadeh, S. M. (2015) · Journal of Environmental Quality · doi:10.2134/jeq2015.01.0058 · Cited by 40
“Indeed, colloid deposition has been found to increase on rough surfaces in studies using atomic force microscopy (Shellenberger and Logan, 2002; Chen et al., 2010) and with digital bright field microscopy (Morales et al., 2009).”
Fluid Electric Force Microscopy for Charge Density Mapping in Biological Systems
Johnson, A. S., Nehl, C. L., Mason, M. G., & Hafner, J. H. (2003) · Langmuir · doi:10.1021/la035255f · Cited by 40
Effect of Carbon Nanotubes on the Transport and Retention of Bacteria in Saturated Porous Media
Yang, H., Tong, M., & Kim, H. (2013) · Environmental Science & Technology · doi:10.1021/es4022415 · Cited by 38
Microbial interactions with silicate glasses
Weaver, J. L., DePriest, P. T., Plymale, A. E., Pearce, C. I., Arey, B. W., & Koestler, R. J. (2021) · npj Materials Degradation · doi:10.1038/s41529-021-00153-w · Cited by 42
Unraveling the antibacterial mode of action of a clay from the Colombian Amazon
Londono, S. C., & Williams, L. B. (2015) · Environmental Geochemistry and Health · doi:10.1007/s10653-015-9723-y · Cited by 39
“However, discrepancies between theory and observations have been reported in studies in which surface roughness is considered (Shellenberger and Logan 2002).”
BackgroundTransport of carbon colloid supported nanoscale zero-valent iron in saturated porous media
Busch, J., Meißner, T., Potthoff, A., & Oswald, S. E. (2014) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2014.05.006 · Cited by 37
Jin, C., Glawdel, T., Ren, C. L., & Emelko, M. B. (2015) · Scientific Reports · doi:10.1038/srep17747 · Cited by 36
Li, X., Li, Z., & Zhang, D. (2010) · Environmental Science & Technology · doi:10.1021/es903647g · Cited by 35
Liu, G., Zhong, H., Jiang, Y., Brusseau, M. L., Huang, J., Shi, L., Liu, Z., Liu, Y., & Zeng, G. (2016) · Water Resources Research · doi:10.1002/2016wr019832 · Cited by 35
“Such properties may result in elevated adsorption capacity [Dai and Hozalski, 2003; Hoek et al., 2003; Parent and Velegol, 2004; Shellenberger and Logan, 2002] and enhanced straining potential for bacterial cells [Bradford and Bettahar, 2005; Bradford et al.”
Transport of graphene oxide in saturated quartz sand containing iron oxides
Qi, Z., Du, T., Ma, P., Liu, F., & Chen, W. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.12.143 · Cited by 35
Yang, Y., Bogler, A., Ronen, Z., Oron, G., Herzberg, M., & Bernstein, R. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b06763 · Cited by 34
Vermeltfoort, P. B. J., van der Mei, H. C., Busscher, H. J., Hooymans, J. M. M., & Bruinsma, G. M. (2004) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30100 · Cited by 35
Interactions between nanoparticles and fractal surfaces
Wang, H., Zhang, W., Zeng, S., Shen, C., Jin, C., & Huang, Y. (2018) · Water Research · doi:10.1016/j.watres.2018.12.029 · Cited by 34
Study of Nanoparticle Adsorption and Release in Porous Media Based on the DLVO Theory
Abdelfatah, E., Kang, K., Pournik, M., Shiau, B.-J. B., Harwell, J. H., Haroun, M., & Rahman, M. M. (2017) · SPE Latin American and Caribbean Petroleum Engineering Conference · doi:10.2118/185484-ms · Cited by 35
Ming, C., Xu, N., Christodoulatos, C., & Wang, D. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.09.106 · Cited by 33
Interaction forces between waterborne bacteria and activated carbon particles
Busscher, H. J., Dijkstra, R. J. B., Langworthy, D. E., Collias, D. I., Bjorkquist, D. W., Mitchell, M. D., & van der Mei, H. C. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.03.018 · Cited by 32
Zhong, H., Liu, G., Jiang, Y., Brusseau, M. L., Liu, Z., Liu, Y., & Zeng, G. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.11.024 · Cited by 32
Ma, H., Winslow, C. J., & Logan, B. E. (2007) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2007.10.007 · Cited by 32
Self-citationComparison of microsphere deposition in porous media versus simple shear systems
Brow, C. N., Li, X., Rička, J., & Johnson, W. P. (2004) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.11.005 · Cited by 31
Single-Walled Carbon Nanotube Transport in Representative Municipal Solid Waste Landfill Conditions
Khan, I. A., Berge, N. D., Sabo‐Attwood, T., Ferguson, P. L., & Saleh, N. B. (2013) · Environmental Science & Technology · doi:10.1021/es401748f · Cited by 30
Zhao, W., Walker, S. L., Huang, Q., & Cai, P. (2015) · Chemical Geology · doi:10.1016/j.chemgeo.2015.06.013 · Cited by 30
Wu, L., Gao, B., Muñoz‐Carpena, R., & Pachepsky, Y. A. (2012) · Environmental Science & Technology · doi:10.1021/es301365f · Cited by 31
Particle Deposition onto Charge Heterogeneous Surfaces: Convection−Diffusion−Migration Model
Nazemifard, N., Masliyah, J. H., & Bhattacharjee, S. (2006) · Langmuir · doi:10.1021/la061702q · Cited by 30
Shen, C., Jin, Y., Li, B., Zheng, W., & Huang, Y. (2013) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2013.07.125 · Cited by 30
Zurob, E., Dennett, G., Gentil, D., Montero‐Silva, F., Gerber, U., Naulin, P. A., Gómez, A. V., Fuentes, R., Lascano, S. K., da Cunha, T. H. R., et al. (2019) · Nanomaterials · doi:10.3390/nano9010049 · Cited by 29
“Surface roughness at the nanometer scale has been shown to increase adhesion [54], but differences in surface roughness on the order of tens of nanometers has been found to be negligible in comparison to other surface properties such as charge [55].”
BackgroundMay, R., & Li, Y. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.11.028 · Cited by 29
Wang, X., Liu, B., Pan, X., & Gadd, G. M. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.07.309 · Cited by 28
Mechanistic study of nanoparticles deposition and release in porous media
Abdelfatah, E., Kang, K., Pournik, M., Shiau, B.-J. B., & Harwell, J. H. (2017) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2017.08.003 · Cited by 28
Evaluation of Characterization Techniques for Iron Pipe Corrosion Products and Iron Oxide Thin Films
Borch, T., Camper, A. K., Biederman, J. A., Butterfield, P. W., Gerlach, R., & Amonette, J. E. (2008) · Journal of Environmental Engineering · doi:10.1061/(asce)0733-9372(2008)134:10(835 · Cited by 27
Two-site colloid transport with reversible and irreversible attachment: Analytical solutions
Katzourakis, V. E., & Chrysikopoulos, C. V. (2019) · Advances in Water Resources · doi:10.1016/j.advwatres.2019.05.026 · Cited by 27
Particle deposition onto micropatterned charge heterogeneous substrates: Trajectory analysis
Nazemifard, N., Masliyah, J. H., & Bhattacharjee, S. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.06.033 · Cited by 27
Impact of Flow Velocity on Transport of Graphene Oxide Nanoparticles in Saturated Porous Media
Zhang, C., Yan, A., Wang, G., Jin, C., Chen, Y., & Shen, C. (2018) · Vadose Zone Journal · doi:10.2136/vzj2018.01.0019 · Cited by 26
Dixit, D., Soppina, V., & Ghoroi, C. (2019) · Scientific Reports · doi:10.1038/s41598-019-54602-3 · Cited by 26
Verran, J., Packer, A., Kelly, P. J., & Whitehead, K. A. (2010) · Journal of Adhesion Science and Technology · doi:10.1163/016942410x508019 · Cited by 26
Sasidharan, S., Bradford, S. A., Torkzaban, S., Ye, X., Vanderzalm, J. L., Du, X., & Page, D. W. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.06.091 · Cited by 27
“, 2005), solid surface roughness (Shellenberger and Logan, 2002), and chemical heterogeneities (Schulze-Makuch et al.”
BackgroundConcurrent Modeling of Hydrodynamics and Interaction Forces Improves Particle Deposition Predictions
Jin, C., Ren, C. L., & Emelko, M. B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00218 · Cited by 25
Transport and retention of porous silicon-coated zero-valent iron in saturated porous media
Lü, H., Dong, J. C., Xi, B., Cai, P., Xia, T., & Zhang, M. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116700 · Cited by 25
Aquatische Kolloide I: Eine Übersichtsarbeit zur Definition, zu Systemen und zur Relevanz
Hofmann, T., Baumann, T., Bundschuh, T., von der Kammer, F., Leis, A. P., Schmitt, D., Schäfer, T., Thieme, J., Totsche, K. U., & Zänker, H. (2003) · Grundwasser · doi:10.1007/s00767-003-0001-z · Cited by 25
Albarran, N., Missana, T., Alonso, Ú., Garcı́a-Gutiérrez, M., & López, T. (2013) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.02.002 · Cited by 24
Particle Deposition onto Janus and Patchy Spherical Collectors
Chatterjee, R., Mitra, S. K., & Bhattacharjee, S. (2011) · Langmuir · doi:10.1021/la201421n · Cited by 24
Li, K., & Ma, H. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00748 · Cited by 24
Glass beads for road markings and other industrial usage: Crystallinity and hazardous elements
Burghardt, T. E., Ettinger, K., Köck, B., & Hauzenberger, C. A. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01213 · Cited by 23
Tailoring the frictional properties of granular media
Utermann, S., Aurin, P., Benderoth, M., Fischer, C., & Schröter, M. (2011) · Physical Review E · doi:10.1103/physreve.84.031306 · Cited by 23
Transport of bare and capped zinc oxide nanoparticles is dependent on porous medium composition
Kurlanda-Witek, H., Ngwenya, B. T., & Butler, I. B. (2014) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2014.04.002 · Cited by 23
Use of nanoparticle-coated bacteria for the bioremediation of organic pollution: A mini review
Feng, J.-R., Deng, Q.-X., Han, S.-K., & Ni, H. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.137391 · Cited by 21
Improvement of the Adhesion Between TiO2 Nanofilm and Glass Substrate by Roughness Modifications
Cedillo-González, E. I., Montorsi, M., Mugoni, C., Montorsi, M., & Siligardi, C. (2013) · Physics Procedia · doi:10.1016/j.phpro.2012.12.003 · Cited by 21
Li, Z., Zhang, D., & Li, X. (2010) · Environmental Science & Technology · doi:10.1021/es9027716 · Cited by 21
Paramonova, E., Zerfoss, E. L., & Logan, B. E. (2006) · Applied and Environmental Microbiology · doi:10.1128/aem.02988-05 · Cited by 21
Self-citationMrad, O., Saunier, J., Aymes‐Chodur, C., Rosilio, V., Bouttier, S., Agnely, F., Aubert, P., Vigneron, J., Etchéberry, A., & Yagoubi, N. (2010) · Microscopy and Microanalysis · doi:10.1017/s1431927610093876 · Cited by 20
Qin, J., He, L., Su, X., Wang, S., & Tong, M. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.4c02533 · Cited by 19
Ron, C. A., & Johnson, W. P. (2020) · Environmental Science Nano · doi:10.1039/d0en00815j · Cited by 19
Liao, S., Ghosh, A., Becker, M. D., Abriola, L. M., Cápiro, N. L., Fortner, J. D., & Pennell, K. D. (2020) · Environmental Science Nano · doi:10.1039/d0en01033b · Cited by 19
Effect of particle roughness on the rheology of suspensions of hollow glass microsphere particles
Hoyle, C., Dai, S., Tanner, R. I., & Jabbarzadeh, A. (2020) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2020.104235 · Cited by 18
Chepyala, R., & Panda, S. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.01.094 · Cited by 18
Taboada-Serrano, P., Yiacoumi, S., & Tsouris, C. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2238869 · Cited by 18
Transport of Escherichia coli in 25m quartz sand columns
Lutterodt, G. S., Foppen, J. W., Maksoud, A. A. A. A., & Uhlenbrook, S. (2010) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2010.09.010 · Cited by 17
Li, W., Shih, Y., Carretero, D. S., & Huang, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132069 · Cited by 17
Experimental study of the immobilization of Acidithiobacillus ferrooxidans on carbon based supports
Ginsburg, M. A., & Karamanev, D. G. (2007) · Biochemical Engineering Journal · doi:10.1016/j.bej.2007.03.003 · Cited by 17
Lohwacharin, J., Takizawa, S., & Punyapalakul, P. (2015) · Environmental Pollution · doi:10.1016/j.envpol.2015.05.036 · Cited by 17
Sabalowsky, A. R., & Semprini, L. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22822 · Cited by 16
Tang, Y., Wang, X., Yan, Y., Zeng, H., Wang, G., Tan, W., Liu, F., & Feng, X. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.06.008 · Cited by 16
Dong, P., Liang, Y., Shen, C., Jiang, E., & BRADFORD, S. A. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.134153 · Cited by 15
Eskhan, A. O., & Abu‐Lail, N. I. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c01500 · Cited by 16
Argent, J., Torkzaban, S., Hubbard, S., Le, H., Amirianshoja, T., & Haghighi, M. (2015) · Transport in Porous Media · doi:10.1007/s11242-015-0511-z · Cited by 15
“hr and f range from 0 to 50nm and 5 to 20%, respectively, to be consistent with results of published AFM measurements of glass surfaces (Shellenberger and Logan 2002).”
ResultCharge nonuniformity light scattering
Jones, J. F., Holtzer, G. L., Snyder, C. E., Yake, A. M., & Velegol, D. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.045 · Cited by 15
Rising to the surface: capturing and detecting bacteria by rationally-designed surfaces
Setter, O. P., Xin, J., & Segal, E. (2023) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2023.102969 · Cited by 14
A morphological study on direct polymer cast micro-textured hydrophobic surfaces
Adithyavairavan, M., & Subbiah, S. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.03.082 · Cited by 14
Maeng, M., Choi, S., Shahi, N. K., & Dockko, S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109690 · Cited by 15
Fate and transport of fragmented and spherical microplastics in saturated gravel and quartz sand
Ameen, A., Stevenson, M. E., Kirschner, A. K. T., Jakwerth, S., Derx, J., & Blaschke, A. P. (2024) · Journal of Environmental Quality · doi:10.1002/jeq2.20618 · Cited by 20
“Several researchers suggest that grain surface area, angularity, and roughness can all play a role in physicochemical filtration (Bhattacharjee et al., 1998; Saiers & Ryan, 2005; Shellenberger & Logan, 2002).”
Li, Z., Zhang, D., & Li, X. (2012) · Water Resources Research · doi:10.1029/2012wr011847 · Cited by 13
“…RESEARCH, VOL. 48, W05533, doi:10.1029/2012WR011847, 2012 of account of charge heterogeneity and roughness on grain and colloid surfaces in CFT has been traditionally considered as the main factor leading to the discrepancies [e.g., Bhattacharjee et al., 1998; Shellenberger and Logan, 2002].”
BackgroundInfluentialColloid Transport in Bicontinuous Nanoporous Media
Liang, A., Liu, C., & Branicio, P. S. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c00037 · Cited by 11
Biosand Filter (BSF): Types and Mechanisms behind Its Efficiency
Janjaroen, D. (2016) · Applied Environmental Research · doi:10.35762/aer.2016.38.3.8 · Cited by 12
Hwang, G., Hong, G., & Kim, H. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.158798 · Cited by 12
Surface heterogeneity mediated transport of hydrochar nanoparticles in heterogeneous porous media
Yang, J. H., Ming, C., Yang, H., Xu, N., Feng, G., Li, Z., Su, C., & Wang, D. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-09482-w · Cited by 11
Hydrogel Contact Lenses Surface Roughness and Bacterial Adhesion
Jesus, M., & Yebra‐Pimentel, E. (2012) · InTech eBooks · doi:10.5772/48436 · Cited by 13
Salerno, M. B., Rothstein, S. N., Nwachukwu, C., Shelbi, H., Velegol, D., & Logan, B. E. (2005) · Environmental Science & Technology · doi:10.1021/es050204l · Cited by 12
Self-citationTuning Microbial Activity via Programmatic Alteration of Cell/Substrate Interfaces
Gulyuk, A. V., LaJeunesse, D., Collazo, R., & Ivanisevic, A. (2021) · Advanced Materials · doi:10.1002/adma.202004655 · Cited by 11
Determining minimum sticking efficiencies of six environmental Escherichia coli isolates
Lutterodt, G. S., Basnet, M., Foppen, J. W., & Uhlenbrook, S. (2009) · Journal of Contaminant Hydrology · doi:10.1016/j.jconhyd.2009.09.005 · Cited by 11
Highly Efficient Antimicrobial Ceramics Based on Electrically Charged Interfaces
Reinosa, J. J., Rojo, M. M., del Campo, A., Martín‐González, M., & Fernández, J. F. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10690 · Cited by 11
Tanino, Y., Ibekwe, A., & Pokrajac, D. (2020) · Physical review. E · doi:10.1103/physreve.102.013109 · Cited by 11
Interception History Drives Colloid Transport Variance in Porous Media
Volponi, S. N., Al‐Zghoul, B. M., Porta, G., Bolster, D., & Johnson, W. P. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.4c06509 · Cited by 10
Goethite effects on transport and activity of lysozyme with humic acid in quartz sand
Li, Y., Wang, M., Zhang, Y., Koopal, L. K., & Tan, W. (2020) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2020.125319 · Cited by 10
Transport and Retention of Cryptosporidium Parvum Oocysts in Sandy Soils
Santamaría, J., Brusseau, M. L., Araujo, J. B., Orosz‐Coghlan, P., Blanford, W. J., & Gerba, C. P. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0414 · Cited by 10
Hasan, N., Gopal, J., & Wu, H. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.06.045 · Cited by 10
Yang, H.-H., Morrow, J. B., Grasso, D., Vinopal, R. T., Dechesne, A., & Smets, B. F. (2008) · Environmental Science & Technology · doi:10.1021/es801708h · Cited by 11
Biomimetic Functional Surfaces towards Bactericidal Soft Contact Lenses
Mao, T., & Fang, F. (2020) · Micromachines · doi:10.3390/mi11090835 · Cited by 10
“Higher surface roughness would increase the available active contact area for thermodynamic reactions, and surface irregularities like peaks and troughs serve as shelters for bacteria to promote the survival rate and avoid meeting unfavorable environmental factors [102].”
BackgroundOligotrophic and eutrophic MICP treatment for silica and carbonate sands
Dyer, M., & Viganotti, M. (2016) · Bioinspired Biomimetic and Nanobiomaterials · doi:10.1680/jbibn.16.00002 · Cited by 10
Zeng, C. L., Shadman, F., & Sierra‐Álvarez, R. (2017) · Journal of Nanoparticle Research · doi:10.1007/s11051-017-3808-8 · Cited by 10
“Several other studies have also demonstrated that colloids preferentially deposit on rough surfaces as compared to smooth ones (Bai and Zhang 2001; Jin et al. 2015; Shellenberger and Logan 2002).”
ResultRamm, P., Terboven, C., Neitmann, E., Sohling, U., Mumme, J., & Herrmann, C. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113389 · Cited by 9
Dissolution of Oxide Glasses: A Process Driven by Surface Generation
Sicard, L., Spalla, O., Né, F., Taché, O., & Barboux, P. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp075268s · Cited by 9
Metadata
- Authors
- Shellenberger, K., & Logan, B. E.
- Affiliations
- Pennsylvania State University (US)
- Corresponding author
- Logan, Bruce E.
- ORCID
- Logan, Bruce E.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-12-13
- Volume
- 36
- Issue
- 2
- Pages
- 184-189
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1977534541
- Cited by
- 261
- References
- 38
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 6 · 2023: 6 · 2022: 6 · 2021: 5 · 2020: 11 · 2019: 22 · 2018: 10 · 2017: 12 · 2016: 6 · 2015: 19 · 2014: 14 · 2013: 14 · 2012: 19
- FWCI
- 10.99
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- National Institutes of Health
- National Institute of Environmental Health Sciences (ES 04940, P42ES004940)
- Division of Chemistry
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Fecal contamination and water quality
- Physical Sciences › Environmental Science › Environmental Engineering › Groundwater flow and contamination studies
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- glass beads, colloidal deposition, bacterial deposition, surface charge heterogeneity, latex microspheres, collision efficiency, ionic strength, transport in porous media, perchlorate-reducing bacteria, Escherichia coli
- MeSH terms
- Bacteria, Bacterial Adhesion, Biodegradation, Environmental, Colloids, Equipment Design, Filtration, Glass, Polymers, Water Microbiology, Porosity, Water Purification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.