The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Removal of Arsenic by Bead Cellulose Loaded with Iron Oxyhydroxide from Groundwater
Abstract
A new adsorbent, bead cellulose loaded with iron oxyhydroxide (BCF), was prepared and applied for the adsorption and removal of arsenate and arsenite from aqueous systems. The continuing loading process of Fe in the cellulose beads was realized through hydrolization of ferric salts when alkaline solution was added dropwise. Spherical BCF had excellent mechanical and hydraulic properties. Akaganeite (beta-FeOOH), the reactive center of BCF that was stably loaded into the cellulose, had a high sensitivity to arsenite as well as arsenate. The maximum content of Fe in BCF reached 50% (w/w). In this study we investigated the adsorption behavior of arsenite and arsenate on BCF, including adsorption isotherms, adsorption kinetics, the influence of pH and competing anions on adsorption, and column experiments. The adsorption data accorded with both Freundlich and Langmuir isotherms. The adsorption capacity for arsenite and arsenate was 99.6 and 33.2 mg/g BCF at pH 7.0 with an Fe content of 220 mg/ mL. Kinetic data fitted well to the pseudo-second-order reaction model. Arsenate elimination was favored at acidic pH, whereas the adsorption of arsenite by BCF was found to be effective in a wide pH range of 5-11. Under the experimental conditions, the addition of sulfate had no effect on arsenic adsorption, whereas phosphate greatly influenced the elimination of both arsenite and aresenate. Silicate moderately decreased the adsorption of arsenite, but not arsenate. Both batch experiments and column experiments indicated that BCF had higher removal efficiency for arsenite than for arsenate. While the influent contaminant concentration was 500 microg/L in groundwater and the empty-bed contact time (EBCT) for arsenite and arsenate was 4.2 and 5.9 min, breakthrough empty-bed volumes at the WHO provisional guideline value of 10 microg/L were 2200 and 5000, respectively. BCF can be effectively regenerated when elution is done with 2 M NaOH solution. The column experiments for four cycles showed that stable and high removal efficiency of arsenic was sustained by BCF after regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenate and Chromate Retention Mechanisms on Goethite. 1. Surface Structure
Fendorf, S., Eick, M. J., Grossl, P., & Sparks, D. L. (1997) · Environmental Science & Technology · doi:10.1021/es950653t · Cited by 1,017
Cited by
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Water-Dispersible Magnetite-Reduced Graphene Oxide Composites for Arsenic Removal
Chandra, V., Park, J., Chun, Y., Lee, J. W., Hwang, I.-C., & Kim, K. S. (2010) · ACS Nano · doi:10.1021/nn1008897 · Cited by 1,997
Application of layered double hydroxides for removal of oxyanions: A review
Goh, K.-H., Lim, T.-T., & Dong, Z. (2008) · Water Research · doi:10.1016/j.watres.2007.10.043 · Cited by 1,708
A review on nanomaterials for environmental remediation
Khin, M. M., Nair, A. S., Babu, V. J., Murugan, R., & Ramakrishna, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21818f · Cited by 1,473
Cong, H.-P., Ren, X.-C., Wang, P., & Yu, S.-H. (2012) · ACS Nano · doi:10.1021/nn300082k · Cited by 1,100
Recent advances in regenerated cellulose materials
Wang, S., Lu, A., & Zhang, L. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.07.003 · Cited by 1,033
Removal of arsenic from water by supported nano zero-valent iron on activated carbon
Zhu, H., Jia, Y., Wu, X., & Wang, H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.08.031 · Cited by 688
Graphene-based macroscopic assemblies and architectures: an emerging material system
Cong, H.-P., Chen, J.-F., & Yu, S.-H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00181h · Cited by 461
Nanomaterials for removal of toxic elements from water
Lu, F., & Astruc, D. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.11.003 · Cited by 446
Arsenic removal by iron-modified activated carbon
Chen, W., Parette, R., Zou, J., Cannon, F. S., & Dempsey, B. A. (2007) · Water Research · doi:10.1016/j.watres.2007.01.052 · Cited by 413
Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview
Lofrano, G., Carotenuto, M., Libralato, G., Domingos, R. F., Markus, A., Dini, L., Gautam, R. K., Baldantoni, D., Rossi, M., Sharma, S. K., et al. (2016) · Water Research · doi:10.1016/j.watres.2016.01.033 · Cited by 350
Zhu, B.-J., Yu, X.-Y., Jia, Y., Peng, F.-M., Sun, B., Zhang, M.-Y., Luo, T., Liu, J.-H., & Huang, X.-J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp212514a · Cited by 353
Use of (modified) natural adsorbents for arsenic remediation: A review
Asere, T. G., Stevens, C. V., & Du Laing, G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.237 · Cited by 339
Water Treatment by Adsorption Columns: Evaluation at Ground Level
Ali, I. (2014) · Separation & Purification Reviews · doi:10.1080/15422119.2012.748671 · Cited by 330
Siddiqui, S. I., & Chaudhry, S. A. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.08.009 · Cited by 329
Guo, X., Wu, Z., & He, M. (2009) · Water Research · doi:10.1016/j.watres.2009.06.033 · Cited by 294
Self-citationWater purification by polymer nanocomposites: an overview
Pandey, N., Shukla, S. K., & Singh, N. B. (2017) · Nanocomposites · doi:10.1080/20550324.2017.1329983 · Cited by 285
Adsorbents for the removal of arsenic, cadmium, and lead from contaminated waters
Yadanaparthi, S. K. R., Graybill, D., & von Wandruszka, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.05.103 · Cited by 284
Water-dispersible magnetite-graphene-LDH composites for efficient arsenate removal
Wu, X.-L., Wang, L., Chen, C.-L., Xu, A.-W., & Wang, X.-K. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12678d · Cited by 260
Yoon, Y., Park, W. K., Hwang, T.-M., Yoon, D. H., Yang, W. S., & Kang, J.-W. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.10.053 · Cited by 254
Removal of arsenic from water using granular ferric hydroxide: Macroscopic and microscopic studies
Guan, X.-H., Wang, J., & Chusuei, C. C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.12.012 · Cited by 186
Pervez, M. N., Fu, D., Wang, X., Bao, Q., Yu, T., Naddeo, V., Tian, H., Cao, C., & Zhao, Y. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101437 · Cited by 49
Metadata
- Authors
- Guo, X., & Chen, F.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-07-12
- Volume
- 39
- Issue
- 17
- Pages
- 6808-6818
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1969360742
- Cited by
- 389
- References
- 1
- FWCI
- 9.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.