Quantifying the Dimensions of Nanoscale Organic Surface Layers in Natural Waters
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Nanoscale surface films are known to develop on surfaces exposed to natural waters and have potential impacts on many environmental processes. A new method using atomic force microscopy is presented which physically removes the developed film in a defined area and then quantifies the difference in height between the film and the area where the film has been removed. The difference gives the absolute thickness of the surface film, which has not previously been measured. Suwannee River humic acid was exposed to substrates, and the surface film thickness as a function of pH and exposure time was measured. Discrete and very small colloids in the range 1-5 nm were observed as expected, and these sat on a coherent surface film, notthe original mica substrate. Low pH values of 2 gave rise to relatively thick surface films of about3 nm, although these films were not continuous at higher pH values. At pH 4.8, the film thickness increased with exposure time up to about 5 h and did not subsequently increase. The maximum film thickness measured was about 1 nm at that pH. The method is applicable to the measurement of many environmental surfaces, although resolution will depend on the substrate and film roughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Molecular structure in soil humic substances: the new view
Sutton, R., & Sposito, G. (2005) · Environmental Science & Technology · doi:10.1021/es050778q · Cited by 1,316
Cited by
Nanomaterials in the environment: Behavior, fate, bioavailability, and effects
Klaine, S. J., Alvarez, P. J. J., Batley, G. E., Fernandes, T. F., Handy, R. D., Lyon, D. Y., Mahendra, S., McLaughlin, M. J., & Lead, J. R. (2008) · Environmental Toxicology and Chemistry · doi:10.1897/08-090.1 · Cited by 2,764
Self-citationInteractions of microplastic debris throughout the marine ecosystem
Galloway, T. S., Cole, M., & Lewis, C. (2017) · Nature Ecology & Evolution · doi:10.1038/s41559-017-0116 · Cited by 1,955
Domingos, R. F., Baalousha, M. A., Ju-Nam, Y., Reid, M. M., Tufenkji, N., Lead, J. R., Leppard, G. G., & Wilkinson, K. J. (2009) · Environmental Science & Technology · doi:10.1021/es900249m · Cited by 580
Self-citationBaalousha, M. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2008.11.022 · Cited by 562
Engineered nanoparticles and organic matter: A review of the state-of-the-art
Grillo, R., Rosa, A. H., & Fraceto, L. F. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.07.049 · Cited by 335
From soil to cave: Transport of trace metals by natural organic matter in karst dripwaters
Hartland, A., Fairchild, I. J., Lead, J. R., Borsato, A., Baker, A., Frisia, S., & Baalousha, M. (2012) · Chemical Geology · doi:10.1016/j.chemgeo.2012.01.032 · Cited by 166
“Small colloids including humic-like NOM and iron and manganese oxides, bind to soil and aquifer solids, forming films (Hering, 1995; Mayer and Xing, 2001); humic substances also form films on mineral colloids (Gibson et al., 2007) such as iron oxides, enhancing their surface charge and enabling their disaggregation an…”
BackgroundMethodSelf-citationMacromolecular Coronas and Their Importance in Nanotoxicology and Nanoecotoxicology
Lynch, I., Dawson, K. A., Lead, J. R., & Valsami-Jones, E. (2014) · Frontiers of Nanoscience · doi:10.1016/b978-0-08-099408-6.00004-9 · Cited by 61
Self-citationHeavy Metal Sorption at the Muscovite (001)–Fulvic Acid Interface
Lee, S. S., Nagy, K. L., Park, C., & Fenter, P. (2011) · Environmental Science & Technology · doi:10.1021/es201323a · Cited by 39
Metadata
- Authors
- Gibson, C. T., Turner, I. J., Roberts, C. J., & Lead, J. R.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-01-13
- Volume
- 41
- Issue
- 4
- Pages
- 1339-1344
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2007723663
- Cited by
- 51
- References
- 1
- FWCI
- 2.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.