The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Carbon Dioxide Capture by Functionalized Solid Amine Sorbents with Simulated Flue Gas Conditions
Abstract
A novel solid amine sorbent was prepared using KIT-6-type mesoporous silica modified with tetraethylenepentamine (TEPA). Its adsorption behavior toward CO(2) from simulated flue gases is investigated using an adsorption column. The adsorption capacities at temperatures of 303, 313, 333, 343, and 353 K are 2.10, 2.29, 2.58, 2.85, and 2.71 mmol g(-1), respectively. Experimental adsorption isotherms were obtained, and the average isosteric heat of adsorption was 43.8 kJ/mol. The adsorption capacity increases to 3.2 mmol g(-1) when the relative humidity (RH) of the simulated flue gas reaches 37%. The adsorption capacity is inhibited slightly by the presence of SO(2) at concentrations lower than 300 ppm but is not significantly influenced by NO at concentrations up to 400 ppm. The adsorbent is completely regenerated in 10 min at 393 K and a pressure of 5 KPa, with expected consumption energy of about 1.41 MJ kg(-1) CO(2). The adsorption capacity remains almost the same after 10 cycles of adsorption/regeneration with adsorption conditions of 10 vol % CO(2), 100 ppm SO(2), 200 ppm NO, 100% relative humidity, and a temperature of 393 K. The solid amine sorbent, KIT-6(TEPA), performs excellently for CO(2) capture and its separation from flue gas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cycle Development and Design for CO 2 Capture from Flue Gas by Vacuum Swing Adsorption
Zhang, J., & Webley, P. A. (2008) · Environmental Science & Technology · doi:10.1021/es0706854 · Cited by 132
Cited by
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Metadata
- Authors
- Liu, Y., Ye, Q., Shen, M., Shi, J., Chen, J., Pan, H., & Shi, Y.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-06-14
- Volume
- 45
- Issue
- 13
- Pages
- 5710-5716
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2312496888
- Cited by
- 159
- References
- 1
- FWCI
- 15.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.