The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Enhanced Performance of NaOH-Modified Pt/TiO2 toward Room Temperature Selective Oxidation of Formaldehyde
Abstract
Pt/TiO(2) catalysts with various Pt loadings (0.05-2 wt %) were prepared by a combined NaOH-assisted impregnation of titania with Pt precursor and NaBH(4)-reduction. The thermal catalytic activity was evaluated toward catalytic decomposition of formaldehyde (HCHO) vapor in the presence of toluene under ambient conditions. HCHO could be selectively oxidized into CO(2) and H(2)O over Pt/TiO(2) catalysts and toluene had no change. Pt/TiO(2) catalysts prepared with the assistance of NaOH showed higher HCHO oxidation activity than those without NaOH due to the introduction of additional surface hydroxyl groups, the enhanced adsorption capacity toward HCHO, and larger mesopores and macropores facilitating diffusion and transport of reactants and products. The as-prepared Pt/TiO(2) catalysts with an optimal Pt loading of 1 wt % exhibited high catalytic stability. Considering the versatile combination of noble-metal nanoparticles and supports, this work will provide new insights to the design of high-performance catalysts for indoor air purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Cited by
Low temperature catalytic oxidation of volatile organic compounds: a review
Huang, H., Xu, Y., Feng, Q., & Leung, D. Y. C. (2015) · Catalysis Science & Technology · doi:10.1039/c4cy01733a · Cited by 770
Wang, J., Li, J., Jiang, C., Zhou, P., Zhang, P., & Yu, J. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.11.036 · Cited by 485
Self-citationMeng, A., Zhang, J., Xu, D., Cheng, B., & Yu, J. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.05.074 · Cited by 426
Self-citationShen, L., Liang, R., Luo, M., Jing, F., & Wu, L. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04162c · Cited by 300
Zhang, R., Wang, H., Tang, S., Liu, C., Dong, F., Yue, H., & Liang, B. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02441 · Cited by 299
Progress in fabrication of one-dimensional catalytic materials by electrospinning technology
Zhu, S., & Nie, L. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.09.016 · Cited by 91
Self-citation
Metadata
- Authors
- Nie, L., Yu, J., Li, X., Cheng, B., Liu, G., & Jaroniec, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-03-05
- Volume
- 47
- Issue
- 6
- Pages
- 2777-2783
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2048823205
- Cited by
- 401
- References
- 1
- FWCI
- 14.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
