The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Harvesting Capacitive Carbon by Carbonization of Waste Biomass in Molten Salts
Abstract
Conversion of waste biomass to value-added carbon is an environmentally benign utilization of waste biomass to reduce greenhouse gas emissions and air pollution caused by open burning. In this study, various waste biomasses are converted to capacitive carbon by a single-step molten salt carbonization (MSC) process. The as-prepared carbon materials are amorphous with oxygen-containing functional groups on the surface. For the same type of waste biomass, the carbon materials obtained in Na2CO3-K2CO3 melt have the highest Brunauer-Emmett-Teller (BET) surface area and specific capacitance. The carbon yield decreases with increasing reaction temperature, while the surface area increases with increasing carbonization temperature. A working temperature above 700 °C is required for producing capacitive carbon. The good dissolving ability of alkaline carbonate molten decreases the yield of carbon from waste biomasses, but helps to produce high surface area carbon. The specific capacitance data confirm that Na2CO3-K2CO3 melt is the best for producing capacitive carbon. The specific capacitance of carbon derived from peanut shell is as high as 160 F g(-1) and 40 μF cm(-2), and retains 95% after 10,000 cycles at a rate of 1 A g(-1). MSC offers a simple and environmentally sound way for transforming waste biomass to highly capacitive carbon as well as an effective carbon sequestration method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765
Chen, Y., Zhu, Y., Wang, Z., Li, Y., Wang, L., Ding, L., Gao, X., Ma, Y., & Guo, Y. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.01.006 · Cited by 394
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Cited by
Highly porous graphitic biomass carbon as advanced electrode materials for supercapacitors
Gong, Y., Li, D., Luo, C., Fu, Q., & Pan, C. (2017) · Green Chemistry · doi:10.1039/c7gc01681f · Cited by 1,116
Bi, Z., Kong, Q., Cao, Y., Sun, G., Su, F., Wei, X., Li, X., Ahmad, A., Xie, L., & Chen, C.-M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04436a · Cited by 966
Biomass-derived carbon: synthesis and applications in energy storage and conversion
Deng, J., Li, M., & Wang, Y. (2016) · Green Chemistry · doi:10.1039/c6gc01172a · Cited by 956
Biomass derived carbon for energy storage devices
Wang, J., Nie, P., Ding, B., Dong, S., Hao, X., Dou, H., & Zhang, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08742f · Cited by 809
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Synthesis Strategies of Porous Carbon for Supercapacitor Applications
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2020) · Small Methods · doi:10.1002/smtd.201900853 · Cited by 671
Biomass pyrolysis: past, present, and future
Fahmy, T. Y. A., Fahmy, Y., Mobarak, F., El-Sakhawy, M., & Abou-Zeid, R. E. (2020) · Environment, Development and Sustainability · doi:10.1007/s10668-018-0200-5 · Cited by 528
Wang, C., Wu, D., Wang, H., Gao, Z., Xu, F., & Jiang, K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta07579k · Cited by 458
Deng, X., Zhao, B., Zhu, L., & Shao, Z. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.031 · Cited by 339
Qiu, Z., Wang, Y., Bi, X., Zhou, T., Zhou, J., Zhao, J., Miao, Z., Yi, W., Fu, P., & Zhuo, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.077 · Cited by 305
Metadata
- Authors
- Yin, H., Lu, B., Xu, Y., Tang, D., Mao, X., Xiao, W., Wang, D., & Alshawabkeh, A. N.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-07-01
- Volume
- 48
- Issue
- 14
- Pages
- 8101-8108
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2323739963
- Cited by
- 188
- References
- 3
- FWCI
- 3.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.