Cited by 49Thermal and Kinetic AnalysisThermochemical Biomass Conversion ProcessesRecycling and Waste Management Techniques

Metal Behavior during the Low-Temperature Pyrolysis of Chromated Copper Arsenate-Treated Wood Waste

Helsen, Lieve, Van den Bulck, Eric·2000·Environmental Science & Technology

Abstract

In the frame of a study that aims at optimizing the pyrolysis of chromated copper arsenate- (CCA-) treated wood with respect to a minimal metal release upon a maximal mass reduction, a set of experimental studies has been carried out in order to gain more insight in the metal (Cr, Cu, and As) behavior during the pyrolysis process. These experiments are described in detail in previous publications. In this paper, the experimental observations are translated in a mechanism that describes the metal (in particular As) behavior during pyrolysis. Two hypotheses concerning the As release are tested for their validity: (a) there exists a unique relation between the As release and the mass reduction of wood or wood components; (b) the As is released according to its own kinetic scheme consisting of a single first-order reaction. The last one results in a preexponential factor A = 0.39 min - 1 = 6.5 × 10 - 3 s - 1 and an activation energy E = 20.4 kJ/mol, which are chemically meaningful values for a reduction reaction. The following model is derived: “The release of As is controlled by two consecutive reactions: the reduction of As(V) to As(III), followed by the volatilization of As(III), in the form of the volatile compound As 4 O 6 ”. Because of the good predictions made with the simple one-reaction kinetic scheme, it is expected that the volatilization of As(III) occurs faster than the reduction to As(III). Additional experimental work is needed to verify this approximation, but the…

Integrity signals

Registry

Crossref · 10.1021/es991102w

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Authors
Helsen, L., & Van den Bulck, E.
Affiliations
  • KU Leuven (BE)
  • Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee, Belgium
Corresponding author
Helsen, Lieve
Venue
Environmental Science & Technology
Published
2000-06-07
Volume
34
Issue
14
Pages
2931-2938
ISSN
  • 0013-936X (ISSN-L)
  • 1520-5851
OpenAlex
W2015387949
Cited by
49
References
0
Citations by year
2026: 1 · 2024: 1 · 2023: 2 · 2022: 1 · 2021: 2 · 2020: 2 · 2019: 2 · 2016: 1 · 2015: 1 · 2014: 1 · 2013: 3 · 2012: 1
FWCI
3.10
Type
journal article
Language
en
Open access
closed
Locations
  • Environmental Science & Technology (publishedVersion)
  • Lirias (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
  • Physical Sciences › Engineering › Biomedical Engineering › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
Keywords
chromated copper arsenate, CCA-treated wood, low-temperature pyrolysis, arsenic mobilization, arsenic volatilization, arsenic reduction, metal release, pyrolysis kinetics, first-order reaction, mass reduction, chromium, copper

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review