The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Preparation and Adsorptive Properties of Membrane-Type Adsorbents for Lithium Recovery from Seawater
Abstract
A membrane-type adsorbent of spinel-type manganese oxide was prepared by a solvent exchange method using poly(vinyl chloride) (PVC) as a binder. PVC was dissolved in N, N -dimethylformamide (DMF) solution, after which spinel-type lithium manganese oxide was mixed with the DMF solution. The suspension was spread into a thin film and immersed in water to solidify the PVC. The membrane was treated with an HCl solution to extract lithium, resulting in a membrane-type adsorbent. The preparation conditions were studied by changing the initial PVC concentration versus DMF and lithium manganese oxide content. The membrane thickness, manganese oxide content, and tensile and abrasion strengths were measured for each membrane. A new type of adsorption cell was designed for obtaining a parallel seawater flow along the membrane-type adsorbents. The lithium adsorption experiment was carried out using natural seawater at a linear velocity of 1.25 cm/min. Placing the membrane between spacers was found to be effective in raising the lithium adsorption rate. The adsorption rate depended on the preparation conditions. The membrane prepared from an initial PVC concentration of 8%, and a PVC additive content of 20% is optimum for the adsorption of lithium in seawater. The adsorbed lithium could be easily eluted by treating with an HCl solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000911h · Cited by 340
Self-citationAbe, M., & Chitrakar, R. (1987) · Hydrometallurgy · doi:10.1016/0304-386x(87)90045-4 · Cited by 62
Self-citation
Cited by
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
Membrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
Lithium recovery from brine: Recent developments and challenges
Khalil, A., Mohammed, S., Hashaikeh, R., & Hilal, N. (2022) · Desalination · doi:10.1016/j.desal.2022.115611 · Cited by 396
Metadata
- Authors
- Umeno, A., Miyai, Y., Takagi, N., Chitrakar, R., Sakane, K., & Ooi, K.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-07-27
- Volume
- 41
- Issue
- 17
- Pages
- 4281-4287
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2025268077
- Cited by
- 173
- References
- 2
- FWCI
- 1.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.