Liquefaction and Gasification of Cellulose with Na2CO3 and Ni in Subcritical Water at 350 °C
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Cellulose decomposition without catalyst, liquefaction with Na 2 CO 3, and gasification with Ni were studied in an autoclave and in a 50-nL microreactor (diamond anvil cell; DAC) coupled with optical and infrared microcopy in subcritical water up to 350 °C. Solid residue was the main product for noncatalytic decomposition of cellulose, which took place mostly under heterogeneous conditions at slow heating rates (0.18 °C/s). Homogeneous conditions could be achieved at a high heating rate of 2.2 °C/s, and solid residue was still the main product, but with different structure and reaction pathways. When Na 2 CO 3 and Ni were used, however, oil and gas were the main products, with little residue being formed. In both catalytic cases, liquefaction and gasification seemed to occur in the aqueous phase after cellulose dissolution. Different reaction mechanisms for homogeneous and heterogeneous environments are proposed. It is expected that by using a high heating rate (e.g., 2.2 °C/s), a homogeneous phase can be achieved and more oil and gas can be produced to avoid solid residue formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kabyemela, B. M., Adschiri, T., Malaluan, R. M., & Arai, K. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9806390 · Cited by 592
Hydrothermolysis of Cellulose Under Static and Dynamic Conditions at High Temperatures
Schwald, W., & Bobleter, O. (1989) · Journal of Carbohydrate Chemistry · doi:10.1080/07328308908048017 · Cited by 40
Cited by
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420
Supercritical water gasification
Kruse, A. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.93 · Cited by 547
Hydrothermal Liquefaction of Macroalgae Enteromorpha prolifera to Bio-oil
Zhou, D., Zhang, L., Zhang, S., Fu, H., & Chen, J. (2010) · Energy & Fuels · doi:10.1021/ef100151h · Cited by 531
Supercritical water gasification of biomass for hydrogen production
Reddy, S. N., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.125 · Cited by 531
Yu, Y., Lou, X., & Wu, H. (2008) · Energy & Fuels · doi:10.1021/ef700292p · Cited by 479
Reaction chemistry and phase behavior of lignin in high-temperature and supercritical water
Fang, Z., Sato, T., Smith, R. L., Inomata, H., Arai, K., & Kozinski, J. A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.08.008 · Cited by 396
Self-citationA review of bio-oil production from hydrothermal liquefaction of algae
Guo, Y., Yeh, T., Song, W., Xu, D., & Wang, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.049 · Cited by 395
Subcritical Water as Reaction Environment: Fundamentals of Hydrothermal Biomass Transformation
Möller, M., Nilges, P., Harnisch, F., & Schröder, U. (2011) · ChemSusChem · doi:10.1002/cssc.201000341 · Cited by 374
Direct Liquefaction of Biomass
Behrendt, F., Neubauer, Y., Oevermann, M., Wilmes, B., & Zobel, N. (2008) · Chemical Engineering & Technology · doi:10.1002/ceat.200800077 · Cited by 374
Okolie, J. A., Rana, R., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00565f · Cited by 321
Hot compressed water as reaction medium and reactant
Kruse, A., & Dinjus, E. (2007) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.12.006 · Cited by 302
Azadi, P., & Farnood, R. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.05.081 · Cited by 299
Solid acid mediated hydrolysis of biomass for producing biofuels
Guo, F., Fang, Z., Xu, C. C., & Smith, R. L. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.04.001 · Cited by 276
Self-citationKruse, A., Maniam, P., & Spieler, F. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061047h · Cited by 270
Hydrothermal liquefaction of cellulose to bio-oil under acidic, neutral and alkaline conditions
Yin, S., & Tan, Z. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.041 · Cited by 268
Kruse, A., Krupka, A., Schwarzkopf, V., Gamard, C., & Henningsen, T. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049129y · Cited by 199
Nagappan, S., Bhosale, R. R., Nguyen, D. D., Chi, N. T. L., Ponnusamy, V. K., Woong, C. S., & Kumar, G. (2021) · Fuel · doi:10.1016/j.fuel.2020.119053 · Cited by 181
Hydrothermal Conversion of Biomass: I, Glucose Conversion in Hot Compressed Water
Knežević, D., van Swaaij, W. P. M., & Kersten, S. R. A. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801387v · Cited by 180
Hydrothermal Reactions of Biomolecules Relevant for Microalgae Liquefaction
Changi, S. M., Faeth, J. L., Mo, N., & Savage, P. E. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02771 · Cited by 175
Heterogeneous catalysts for hydrothermal liquefaction of lignocellulosic biomass: A review
Scarsella, M., de Caprariis, B., Damizia, M., & De Filippis, P. (2020) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105662 · Cited by 152
Huang, M., Luo, J., Fang, Z., & Li, H. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.02.069 · Cited by 112
Self-citationHydrothermal Degradation of Cellulose at Temperature from 200 to 300 °C
Gagić, T., Perva-Uzunalić, A., Knez, Ž., & Škerget, M. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00332 · Cited by 67
Metadata
- Authors
- Fang, Z., Minowa, T., Smith, Ogi, T., & Koziński, J. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-04-16
- Volume
- 43
- Issue
- 10
- Pages
- 2454-2463
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1982313483
- Cited by
- 157
- References
- 2
- FWCI
- 4.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.