The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Applications of Pore-Expanded Mesoporous Silicas. 3. Triamine Silane Grafting for Enhanced CO2 Adsorption
Abstract
Conventional MCM-41 and pore-expanded MCM-41 (PE-MCM-41) silicas have been used as supports for grafting 3-[2-(2-aminoethylamino)ethylamino]propyl trimethoxysilane (TRI) and tested for CO 2 adsorption. The effects of the quantity of triamine silane added to the grafting mixture on the CO 2 adsorption capacity and apparent adsorption rate have been examined. The results showed that when both supports were grafted under the same conditions, PE-MCM-41 was grafted with slightly larger quantities of amine than MCM-41, for all controlled silane additions. Based on the adsorption performance of the materials using a dry 5% CO 2 /N 2 feed mixture, the optimal quantity of triamine silane added to the grafting mixture was determined to be ca. 3.0 cm 3 /g(SiO 2 ), for both MCM-41 and PE-MCM-41. The CO 2 adsorption capacity of TRI−PE-MCM-41 was significantly higher than that of TRI−MCM-41. Furthermore, the dynamic adsorption performance of TRI−PE-MCM-41 was far superior to TRI−MCM-41. In comparison to 13X zeolite, TRI−PE-MCM-41 exhibited higher adsorption capacities in the initial time frame of exposure, even though the 13X zeolite exhibited a higher equilibrium adsorption capacity. The result of this behavior is largely due to the rapid CO 2 −amine interaction and the open pore structure of TRI−PE-MCM-41 over that of the 13X zeolite. When these adsorbents were exposed to a humid stream of 5% CO 2 /N 2 (28% relative humidity), both grafted materials exhibited a slight increase in the adsorption capacity, whereas, 13X zeolite did not retain any significant CO 2 adsorption capacity. These results suggest that the TRI−PE-MCM-41 material may be most suitable for use in a rapid cyclic adsorption process under humid feed conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Synthesis and Applications of Supramolecular-Templated Mesoporous Materials
Ying, J. Y., Mehnert, C. P., & Wong, M. S. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19990115)38:1/2<56::aid-anie56>3.0.co;2-e · Cited by 2,030
Hybrid Inorganic-Organic Mesoporous Silicates—Nanoscopic Reactors Coming of Age
Stein, A., Melde, B. J., & Schroden, R. C. (2000) · Advanced Materials · doi:10.1002/1521-4095(200010)12:19<1403::aid-adma1403>3.0.co;2-x · Cited by 1,531
Periodic Mesoporous Silica-Based Organic−Inorganic Nanocomposite Materials
Sayari, A., & Hamoudi, S. (2001) · Chemistry of Materials · doi:10.1021/cm011039l · Cited by 844
Self-citationAdvances in Microporous and Mesoporous Solids—Highlights of Recent Progress
Stein, A. (2003) · Advanced Materials · doi:10.1002/adma.200300007 · Cited by 749
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Self-citationAdsorption of Chromate and Arsenate by Amino-Functionalized MCM-41 and SBA-1
Yoshitake, H., Yokoi, T., & Tatsumi, T. (2002) · Chemistry of Materials · doi:10.1021/cm0202355 · Cited by 392
Satyapal, S., Filburn, T., Trela, J., & Strange, J. (2001) · Energy & Fuels · doi:10.1021/ef0002391 · Cited by 389
Absorption of Carbon Dioxide into Aqueous Blends of Diethanolamine and Methyldiethanolamine
Rinker, E. B., Ashour, S. S., & Sandall, O. C. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990850r · Cited by 364
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
An Investigation of Some Sterically Hindered Amines as Potential Carbon Dioxide Scrubbing Compounds
Hook, R. J. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9605589 · Cited by 361
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Self-citationYokoi, T., Yoshitake, H., & Tatsumi, T. (2004) · Journal of Materials Chemistry · doi:10.1039/b310576h · Cited by 352
Sayari, A., Hamoudi, S., & Yang, Y. (2005) · Chemistry of Materials · doi:10.1021/cm048393e · Cited by 340
Self-citationCorrosion Behavior of Carbon Steel in the CO2 Absorption Process Using Aqueous Amine Solutions
Veawab, A., Tontiwachwuthikul, P., & Chakma, A. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9901630 · Cited by 335
The Effect of Water on the Adsorption of CO2 and C3H8 on Type X Zeolites
Brandani, F., & Ruthven, D. M. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie040183o · Cited by 264
Sayari, A., Yang, Y., Kruk, M., & Jaroniec, M. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984504j · Cited by 237
Self-citationAdsorption of Carbon Dioxide on Amine Modified SBA-15 in the Presence of Water Vapor
Hiyoshi, N., Yogo, K., & Yashima, T. (2004) · Chemistry Letters · doi:10.1246/cl.2004.510 · Cited by 189
Sorbents for air prepurification in air separation
Rege, S. U., T. Yang, R., & Buzanowski, M. A. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00122-6 · Cited by 169
Cited by
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Metadata
- Authors
- Harlick, P. J. E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-03-22
- Volume
- 45
- Issue
- 9
- Pages
- 3248-3255
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2029639783
- Cited by
- 393
- References
- 24
- FWCI
- 35.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.