The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Applications of Pore-Expanded Mesoporous Silicas. 3. Triamine Silane Grafting for Enhanced CO2 Adsorption
Abstract
Conventional MCM-41 and pore-expanded MCM-41 (PE-MCM-41) silicas have been used as supports for grafting 3-[2-(2-aminoethylamino)ethylamino]propyl trimethoxysilane (TRI) and tested for CO 2 adsorption. The effects of the quantity of triamine silane added to the grafting mixture on the CO 2 adsorption capacity and apparent adsorption rate have been examined. The results showed that when both supports were grafted under the same conditions, PE-MCM-41 was grafted with slightly larger quantities of amine than MCM-41, for all controlled silane additions. Based on the adsorption performance of the materials using a dry 5% CO 2 /N 2 feed mixture, the optimal quantity of triamine silane added to the grafting mixture was determined to be ca. 3.0 cm 3 /g(SiO 2 ), for both MCM-41 and PE-MCM-41. The CO 2 adsorption capacity of TRI−PE-MCM-41 was significantly higher than that of TRI−MCM-41. Furthermore, the dynamic adsorption performance of TRI−PE-MCM-41 was far superior to TRI−MCM-41. In comparison to 13X zeolite, TRI−PE-MCM-41 exhibited higher adsorption capacities in the initial time frame of exposure, even though the 13X zeolite exhibited a higher equilibrium adsorption capacity. The result of this behavior is largely due to the rapid CO 2 −amine interaction and the open pore structure of TRI−PE-MCM-41 over that of the 13X zeolite. When these adsorbents were exposed to a humid stream of 5% CO 2 /N 2 (28% relative humidity), both grafted materials exhibited a slight increase in the adsorption capacity, whereas, 13X zeolite did not retain any significant CO 2 adsorption capacity. These results suggest that the TRI−PE-MCM-41 material may be most suitable for use in a rapid cyclic adsorption process under humid feed conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Synthesis and Applications of Supramolecular-Templated Mesoporous Materials
Ying, J. Y., Mehnert, C. P., & Wong, M. S. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19990115)38:1/2<56::aid-anie56>3.0.co;2-e · Cited by 2,030
Hybrid Inorganic-Organic Mesoporous Silicates—Nanoscopic Reactors Coming of Age
Stein, A., Melde, B. J., & Schroden, R. C. (2000) · Advanced Materials · doi:10.1002/1521-4095(200010)12:19<1403::aid-adma1403>3.0.co;2-x · Cited by 1,531
Periodic Mesoporous Silica-Based Organic−Inorganic Nanocomposite Materials
Sayari, A., & Hamoudi, S. (2001) · Chemistry of Materials · doi:10.1021/cm011039l · Cited by 844
Self-citationAdvances in Microporous and Mesoporous Solids—Highlights of Recent Progress
Stein, A. (2003) · Advanced Materials · doi:10.1002/adma.200300007 · Cited by 749
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Cited by
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Natural gas origin, composition, and processing: A review
Faramawy, S., Zaki, T., & Sakr, A. A.-E. (2016) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2016.06.030 · Cited by 788
Nanotechnology for Environmental Remediation: Materials and Applications
Guerra, F. D., Attia, M. F., Whitehead, D. C., & Alexis, F. (2018) · Molecules · doi:10.3390/molecules23071760 · Cited by 787
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Recent advances in aerogels for environmental remediation applications: A review
Maleki, H. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.098 · Cited by 679
Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Self-citationCarbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Self-citationCarbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Self-citationAdsorption of heavy metals on functionalized-mesoporous silica: A review
Da'na, E. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.03.050 · Cited by 476
Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Self-citationRecent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 456
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Heydari-Gorji, A., Belmabkhout, Y., & Sayari, A. (2011) · Langmuir · doi:10.1021/la202972t · Cited by 335
Self-citationEfficient CO2 Capturer Derived from As‐Synthesized MCM‐41 Modified with Amine
Yue, M. B., Sun, L. B., Cao, Y., Wang, Y., Wang, Z. J., & Zhu, J. H. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200701467 · Cited by 318
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
Abscheidung von Kohlendioxid: Perspektiven für neue Materialien
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie · doi:10.1002/ange.201000431 · Cited by 291
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900837t · Cited by 281
Self-citationLin, S., & Theato, P. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201300288 · Cited by 277
Amine-bearing mesoporous silica for CO2 removal from dry and humid air
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.044 · Cited by 274
Self-citationCO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management
Jones, C. W. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114252 · Cited by 268
Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group
Yue, M. B., Sun, L. B., Cao, Y., Wang, Z. J., Wang, Y., Yu, Q., & Zhu, J. H. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.016 · Cited by 261
Thermal, Oxidative, and CO2-Induced Degradation of Supported Polyethylenimine Adsorbents
Heydari-Gorji, A., & Sayari, A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003446 · Cited by 253
Self-citationWurzbacher, J. A., Gebald, C., & Steinfeld, A. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01681d · Cited by 252
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
Ben-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Controlling the Adsorption Enthalpy of CO2 in Zeolites by Framework Topology and Composition
Grajciar, L., Čejka, J., Zukal, A., Otero Areán, C., Turnes Palomino, G., & Nachtigall, P. (2012) · ChemSusChem · doi:10.1002/cssc.201200270 · Cited by 112
Nitrogen enriched biochar used as CO2 adsorbents: a brief review
Qiao, Y., & Wu, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100018 · Cited by 70
Metadata
- Authors
- Harlick, P. J. E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-03-22
- Volume
- 45
- Issue
- 9
- Pages
- 3248-3255
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2029639783
- Cited by
- 393
- References
- 24
- FWCI
- 35.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.