The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Fundamentals and Applications of Structured Ceramic Foam Catalysts
Abstract
This paper reviews the use of ceramic foams as structured catalyst supports. They are open-cell ceramic structures that may be fabricated in a variety of shapes from a wide range of materials, and they exhibit very high porosities with good interconnectivity. These characteristics result in a lower pressure drop than that observed with packed beds and high convection in the tortuous megapores, which, in turn, enhances mass and heat transfer. They are easily coated with high-surface-area catalytic components, using well-established techniques. Research in the past decade has produced a large amount of fundamental information that elucidates the desirable properties of ceramic foams. In addition, many applications involving important reactions have appeared in the open and patent literature, especially for catalytic processes that suffer certain limitations, such as those encountered in relieving high pressure drop with low-contact-time reactions at high space velocities or with narrow reactors in heat-transfer-limited systems and in controlling axial and radial temperature profiles in highly exothermic and endothermic reactions. These important contributions are discussed, and the advantages and shortcomings of using ceramic foams as structured catalyst supports to benefit commercial operations are considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Flow through Porous Media-the Ergun Equation Revisited
Macdonald, I. F., El-Sayed, M. S., Mow, K., & Dullien, F. A. L. (1979) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160071a001 · Cited by 1,078
Fluid Flow through Randomly Packed Columns and Fluidized Beds
Ergun, S., & Orning, A. A. (1949) · Industrial & Engineering Chemistry · doi:10.1021/ie50474a011 · Cited by 1,032
Production of Syngas by Direct Catalytic Oxidation of Methane
Hickman, D. A., & Schmidt, L. D. (1993) · Science · doi:10.1126/science.259.5093.343 · Cited by 932
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Single Crystal Metals Encapsulated in Carbon Nanoparticles
Ruoff, R. S., Lorents, D. C., Chan, B., Malhotra, R., & Subramoney, S. (1993) · Science · doi:10.1126/science.259.5093.346 · Cited by 656
Synthesis gas formation by direct oxidation of methane over Pt monoliths*1
HICKMAN, D. (1992) · Journal of Catalysis · doi:10.1016/0021-9517(92)90022-a · Cited by 526
Properties of ceramic foam catalyst supports: pressure drop
Richardson, J. T., Peng, Y., & Remue, D. (2000) · Applied Catalysis A: General · doi:10.1016/s0926-860x(00)00508-1 · Cited by 417
Self-citation(2013) · Choice Reviews Online · doi:10.5860/choice.51-2107 · Cited by 380
Steps in CH4 oxidation on Pt and Rh surfaces: High‐temperature reactor simulations
Hickman, D. A., & Schmidt, L. D. (1993) · AIChE Journal · doi:10.1002/aic.690390708 · Cited by 340
Non-Darcy natural convection in high porosity metal foams
Phanikumar, M. S., & Mahajan, R. L. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00089-3 · Cited by 329
Principles of Catalyst Development
Richardson, J. T. (1989) · Fundamental and applied catalysis · doi:10.1007/978-1-4899-3725-4 · Cited by 321
Self-citationPressure drop prediction for flow through high porosity metallic foams
Du Plessis, P., Montillet, A., Comiti, J., & Legrand, J. (1994) · Chemical Engineering Science · doi:10.1016/0009-2509(94)00170-7 · Cited by 243
Properties of ceramic foam catalyst supports: mass and heat transfer
Richardson, J. T., Remue, D., & Hung, J. (2003) · Applied Catalysis A General · doi:10.1016/s0926-860x(03)00287-4 · Cited by 208
Self-citationCO2 reforming of methane in a solar driven volumetric receiver–reactor
Wörner, A., & Tamme, R. (1998) · Catalysis Today · doi:10.1016/s0920-5861(98)00338-1 · Cited by 172
7th World Congress of Chemical Engineering
Grant, C. (2005) · Process Safety and Environmental Protection · doi:10.1205/cherd.mi.0512 · Cited by 170
Carbon dioxide reforming of methane in a solar volumetric receiver/reactor: the CAESAR project
Buck, R., Muir, J. F., & Hogan, R. E. (1991) · Solar Energy Materials · doi:10.1016/0165-1633(91)90082-v · Cited by 154
(2003) · Chemical & Engineering News · doi:10.1021/cen-v081n004.p060 · Cited by 138
Studies in surface science and catalysis
(1997) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(97)80393-x · Cited by 135
Liguras, D. K., Goundani, K., & Verykios, X. E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.008 · Cited by 133
Liguras, D. K. (2003) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(03)00210-6 · Cited by 99
Strong ceramic foams from polyurethane templates
Luyten, J., Thijs, I., Vandermeulen, W., et al. (2004) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/174367605225010990 · Cited by 71
Catalytic autoignition of higher alkane partial oxidation on Rh-coated foams
Williams, K., & Schmidt, L. D. (2005) · Applied Catalysis A General · doi:10.1016/j.apcata.2005.09.039 · Cited by 70
11th International congress on catalysis
Armor, J. N. (1996) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(97)80013-6 · Cited by 61
Methane and Alkane Conversion Chemistry
Bhasin, M. M., & Slocum, D. W. (1995) · Springer eBooks · doi:10.1007/978-1-4615-1807-5 · Cited by 56
Renewable Olefins from Biodiesel by Autothermal Reforming
Subramanian, R., & Schmidt, L. D. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460790 · Cited by 49
Cited by
He, C., Cheng, J., Zhang, X., Douthwaite, M., Pattisson, S., & Hao, Z. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00408 · Cited by 2,229
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Processing, properties and applications of highly porous geopolymers: A review
Bai, C., & Colombo, P. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.219 · Cited by 391
Zeolitic Materials with Hierarchical Porous Structures
Lopez‐Orozco, S., Inayat, A., Schwab, A., Selvam, T., & Schwieger, W. (2011) · Advanced Materials · doi:10.1002/adma.201100462 · Cited by 389
Muraza, O., & Galadima, A. (2015) · International Journal of Energy Research · doi:10.1002/er.3295 · Cited by 381
Metadata
- Authors
- Twigg, M. V., & Richardson, J. T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-02-24
- Volume
- 46
- Issue
- 12
- Pages
- 4166-4177
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2052227043
- Cited by
- 348
- References
- 27
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.