The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Processing, properties and applications of highly porous geopolymers: A review
Abstract
Abstract Geopolymers, possessing a semi-crystalline three-dimensional inorganic network generated by the dissolution and reaction of a solid alumino-silicate source with an activating solution, have attracted increasing attention from both academia and industry because of their unique and favorable characteristics. This review deals with the synthesis, characterization and potential applications of porous geopolymers, realized through different processing routes. Firstly, the processing approaches are divided into five categories: (i) Direct foaming, (ii) Replica method, (iii) Sacrificial filler method, (iv) Additive manufacturing, and (v) Other methods. Their microstructure, porosity and properties are compared and discussed in relation also to the different processing routes. This review highlights the fact that porous geopolymers are promising low-cost candidates for technologically significant applications such as catalyst supports or membranes, filtration of liquid or gases, adsorption and insulation. This review aims at summarizing the main published results and fostering further investigations into developing innovative ways to generate components with improved properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
A classification of studies on properties of foam concrete
Ramamurthy, K., Nambiar, E. K. K., & Gandhi, I. S. R. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.04.006 · Cited by 1,179
Compression Strength of Porous Sintered Alumina and Zirconia: 9th Communication to Ceramography
RYSHKEWITCH, E. (1953) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1953.tb12837.x · Cited by 1,151
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Properties and applications of foamed concrete; a review
Amran, M., Farzadnia, N., & Ali, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.112 · Cited by 1,123
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Self-citation
Cited by
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Revealing the Influence of Microparticles on Geopolymers’ Synthesis and Porosity
Burduhos Nergis, D. D., Vizureanu, P., Ardelean, I., Sandu, A. V., Corbu, O. C., & Matei, E. (2020) · Materials · doi:10.3390/ma13143211 · Cited by 51
Metadata
- Authors
- Bai, C., & Colombo, P.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 44
- Issue
- 14
- Pages
- 16103-16118
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2804005144
- Cited by
- 391
- References
- 85
- FWCI
- 32.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Processing, properties and applications of highly porous geopolymers: A review. https://app.cochat.ai/papers/10.1016/j.ceramint.2018.05.219
- The paper
- Bai, C., & Colombo, P. (2018). Processing, properties and applications of highly porous geopolymers: A review. Ceramics International. https://doi.org/10.1016/j.ceramint.2018.05.219
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
