Attrition of Calcining Limestones in Circulating Fluidized-Bed Systems
The DOI matches its Crossref record.
Abstract
Limestone attrition in circulating fluidized-bed combustors (CFBCs) has received limited attention. Although there are a number of early studies on attrition in bubbling-bed systems, most current studies focus on simultaneous calcination and sulfation. However, this subject is increasing in importance as CO 2 looping cycles are proposed. CO 2 looping cycles involve repeatedly calcining the CaCO 3 component of the limestone to drive off a pure stream of CO 2 for storage or sequestration. Here, we have looked at five limestones from across Canada, the United States, and Mexico to determine the extent of their attrition under calcining conditions in fluidized-bed systems. This work shows that attrition varies very significantly from limestone to limestone, and even among different batches. It is clear, therefore, that each limestone will have to be carefully categorized to determine its potential for use in such cycles. Also, since limestones crush differently, even those limestones that are double-sieved may have very different initial size distributions. This will affect the results seen in tests carried out under realistic conditions. This work shows that most of the material loss in multiple calcination/carbonation cycles is in the first few cycles, and that even a very low level of sulfation can be a very effective means of reducing that material loss.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Self-citationAn overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Self-citationAbanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Thermal Activation of CaO-Based Sorbent and Self-Reactivation during CO2 Capture Looping Cycles
Manovic, V., & Anthony, E. J. (2008) · Environmental Science & Technology · doi:10.1021/es800152s · Cited by 418
Self-citationDean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.10.013 · Cited by 375
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
Self-citationDemonstration of steady state CO2 capture in a 1.7MWth calcium looping pilot
Arias, B., Diego, M. E., Abanades, J. C., Lorenzo, M., Diaz, L., Martínez, D., Alvarez, J., & Sánchez-Biezma, A. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.07.014 · Cited by 344
Koppatz, S., Pfeifer, C., Rauch, R., Hofbauer, H., Marquard-Moellenstedt, T., & Specht, M. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.03.016 · Cited by 287
Carbonate looping experiments in a 1MWth pilot plant and model validation
Ströhle, J., Junk, M., Kremer, J., Galloy, A., & Epple, B. (2014) · Fuel · doi:10.1016/j.fuel.2013.12.043 · Cited by 233
Ca-based sorbent looping combustion for CO2 capture in pilot-scale dual fluidized beds
Lu, D. Y., Hughes, R. W., & Anthony, E. J. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.06.011 · Cited by 201
Self-citation
Metadata
- Authors
- Jia, L., Hughes, R., Lu, D., Anthony, E. J., & Lau, I.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-06-21
- Volume
- 46
- Issue
- 15
- Pages
- 5199-5209
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2071640252
- Cited by
- 116
- References
- 0
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.