The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production
Abstract
Abstract Calcium looping is a CO 2 capture scheme using solid CaO-based sorbents to remove CO 2 from flue gases, e.g., from a power plant, producing a concentrated stream of CO 2 (∼95%) suitable for storage. The scheme exploits the reversible gas–solid reaction between CO 2 and CaO(s) to form CaCO 3 (s). Calcium looping has a number of advantages compared to closer-to-market capture schemes, including: the use of circulating fluidised bed reactors—a mature technology at large scale; sorbent derived from cheap, abundant and environmentally benign limestone and dolomite precursors; and the relatively small efficiency penalty that it imposes on the power/industrial process (i.e., estimated at 6–8 percentage points, compared to 9.5–12.5 from amine-based post-combustion capture). A further advantage is the synergy with cement manufacture, which potentially allows for decarbonisation of both cement manufacture and power production. In addition, a number of advanced applications offer the potential for significant cost reductions in the production of hydrogen from fossil fuels coupled with CO 2 capture. The range of applications of calcium looping are discussed here, including the progress made towards demonstrating this technology as a viable post-combustion capture technology using small-pilot scale rigs, and the early progress towards a 2 MW scale demonstrator.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Rao, A. B., & Rubin, E. S. (2002) · Environmental Science & Technology · doi:10.1021/es0158861 · Cited by 1,838
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Self-citationCombustion and Gasification in Fluidized Beds
Basu, P. (2006) · CRC Press eBooks · doi:10.1201/9781420005158 · Cited by 966
CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles
Grasa, G. S., & Abanades, J. C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0606946 · Cited by 757
A Twin Fluid-Bed Reactor for Removal of CO2 from Combustion Processes
Shimizu, T., Hirama, T., Hosoda, H., Kitano, K., Inagaki, M., & Tejima, K. (1999) · Chemical Engineering Research and Design · doi:10.1205/026387699525882 · Cited by 730
Conversion Limits in the Reaction of CO2with Lime
Abanades, J. C., & Alvarez, D. (2003) · Energy & Fuels · doi:10.1021/ef020152a · Cited by 716
Effect of the product layer on the kinetics of the CO2‐lime reaction
Bhatia, S. K., & Perlmutter, D. D. (1983) · AIChE Journal · doi:10.1002/aic.690290111 · Cited by 657
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Self-citationCarbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationUnderstanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
Perejón, A., Romeo, L. M., Lara, Y., Lisbona, P., Martínez, A., & Valverde, J. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.121 · Cited by 367
Metadata
- Authors
- Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S.
- Venue
- Chemical Engineering Research and Design
- Publisher
- Elsevier BV
- Published
- 2011-06
- Volume
- 89
- Issue
- 6
- Pages
- 836-855
- ISSN
- 0263-8762 (ISSN-L)
- OpenAlex
- W2058939308
- Cited by
- 375
- References
- 100
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production. https://app.cochat.ai/papers/10.1016/j.cherd.2010.10.013
- The paper
- Dean, C. C., Blamey, J., Florin, N. H., Al-Jeboori, M. J., & Fennell, P. S. (2011). The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production. Chemical Engineering Research and Design. https://doi.org/10.1016/j.cherd.2010.10.013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
