Separation of CO2 from Light Gas Mixtures using Ion-Exchanged Silicoaluminophosphate Nanoporous Sorbents
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Na + -SAPO-34 sorbents were ion-exchanged with several individual metal cations to study their effect on the adsorption of similar size light gases. Measurements of pure component adsorption equilibria, with emphasis on CO 2, were performed at different temperatures (273−348 K) and pressures (<1 atm). Adsorption isotherms for CO 2 in M n+ -SAPO-34 materials displayed a nonlinear behavior and did not follow the typical pore-filling mechanism. In general, the overall adsorption performance of the exchanged materials increased as follows: Ce 3+ < Ti 3+ < Mg 2+ < Ca 2+ < Ag + < Na + < Sr 2+ . The strontium exchanged materials excelled at low-pressure ranges, exhibiting very sharp isotherm slopes at all temperatures. For example, the Sr 2+ -SAPO-34 sorbents were capable of removing as much as 2.8 wt % at a CO 2 partial pressure of 10 −3 atm and room temperature. Isosteric heat of adsorption data confirmed that the Sr 2+ species were responsible for the surface strong interaction, and therefore it is plausible to state that cations were occupying exposed sites (SII′) in the material Chabazite cages. In addition, all divalent cations were found to interact more with the sorbate when compared to the other charged species. Adsorption isotherms for trivalent exchanged cations (Ce 3+, Ti 3+ ), on the other hand, showed what appears to be partial blockage of pore windows (occupancy of SIII), resulting in very low adsorption capacities. The surface interactions were analyzed according to electrostatic and nonspecific contributions. Due to strong ion−quadrupole interactions, all the sorbent materials exhibited higher affinity for CO 2 over the other gases tested (i.e., CH 4, H 2, N 2, and O 2 ). Mathematical modeling to estimate binary component adsorption performance during vacuum pressure adsorption (VPSA) corroborated that Sr 2+ -SAPO-34 sorbents are by far the best option for CO 2 removal from CH 4 mixtures, especially at low concentrations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Hartmann, M., & Kevan, L. (1999) · Chemical Reviews · doi:10.1021/cr9600971 · Cited by 489
Improved SAPO‐34 Membranes for CO2/CH4 Separations
Li, S., Falconer, J. L., & Noble, R. D. (2006) · Advanced Materials · doi:10.1002/adma.200601147 · Cited by 283
Cited by
Tailored crystalline microporous materials by post-synthesis modification
Valtchev, V., Majano, G., Mintova, S., & Pérez-Ramírez, J. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35196j · Cited by 478
Ghanem, B. S., Hashem, M., Harris, K. D. M., Msayib, K. J., Xu, M., Budd, P. M., Chaukura, N., Book, D., Tedds, S., Walton, A., et al. (2010) · Macromolecules · doi:10.1021/ma100640m · Cited by 295
Advances in Pressure Swing Adsorption for Gas Separation
Grande, C. A. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/982934 · Cited by 285
“The result was the discovery of many porous materials, from all kind of zeolites and mesoporous materials [136–141] to the most diverse surfaces in activated carbons [142–145] and lately the high-surface area coordination polymers [146–151].”
BackgroundCarbon dioxide capture with zeotype materials
Fu, D., & Davis, M. E. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00508e · Cited by 284
Augelletti, R., Conti, M., & Annesini, M. C. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.013 · Cited by 253
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Fischer, M., & Bell, R. G. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405507y · Cited by 24
Computational evaluation of aluminophosphate zeotypes for CO 2 /N 2 separation
Fischer, M. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03841k · Cited by 18
Metadata
- Authors
- Rivera-Ramos, M. E., Ruiz-Mercado, G. J., & Hernández-Maldonado, A. J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-07-02
- Volume
- 47
- Issue
- 15
- Pages
- 5602-5610
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2079824457
- Cited by
- 55
- References
- 4
- FWCI
- 9.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.