Assessment of Methanol Synthesis Utilizing Exhaust CO2 for Chemical Storage of Electrical Energy
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The thermodynamic and operational boundaries to store electrical energy chemically are evaluated in this contribution. Methanol is considered as a candidate for chemical energy storage. The production of methanol from exhaust CO 2 could be one way to recyle CO 2 and lower the global CO 2 emissions. Energetic analysis reveals that exergy losses are most severe in the parts of the system when electrical energy is converted to chemical (electrolysis) and when chemical energy is converted to electrical (power generation). In methanol production, the exergetic efficiency is 83.1%, when the chemical exergy of hydrogen and methanol, the exergy of the power input and the released heat are taken into consideration. The exergetic efficiency of the overall energy conversion-storage system including methanol as storage medium was evaluated to be between 16.2 and 20.0% depending on the applied conversion technology. Methanol is suitable not only as stationary energy storage, but it could also be used as fuel for transportation. The energy storage system with hydrogen as storage medium shows higher exergetic efficiency than the methanol route. However, the storage of hydrogen is clearly more complex and cost-intensive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent progress in alkaline water electrolysis for hydrogen production and applications
Zeng, K., & Zhang, D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.002 · Cited by 3,611
Progress and problems in hydrogen storage methods
Zhou, L. (2005) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2004.05.005 · Cited by 691
Cited by
Artz, J., Müller, T. E., Thenert, K., Kleinekorte, J., Meys, R., Sternberg, A., Bardow, A., & Leitner, W. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00435 · Cited by 2,436
Large-scale storage of hydrogen
Andersson, J., & Grönkvist, S. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.03.063 · Cited by 1,356
(2020) · doi:10.1016/j.rser.2019.109620 · Cited by 1,160
Climate change mitigation potential of carbon capture and utilization in the chemical industry
Kätelhön, A., Meys, R., Deutz, S., Suh, S., & Bardow, A. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1821029116 · Cited by 643
Carbon Dioxide Recycling: Emerging Large‐Scale Technologies with Industrial Potential
Quadrelli, E. A., Centi, G., Duplan, J., & Perathoner, S. (2011) · ChemSusChem · doi:10.1002/cssc.201100473 · Cited by 648
Metadata
- Authors
- Rihko-Struckmann, L. K., Peschel, A., Hanke-Rauschenbach, R., & Sundmacher, K.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-09-17
- Volume
- 49
- Issue
- 21
- Pages
- 11073-11078
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1977146644
- Cited by
- 152
- References
- 2
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.