Thermal Management of Structured Adsorbents in CO2 Capture Processes
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In order to have an efficient adsorptive separation, structured adsorbents are expected to satisfy not only mass transfer and pressure drop requirements but also thermal management requirements. To what extent the structure of adsorbent affects the thermal behavior of the system is a question which will be addressed in this study. The primary purpose of this study was to assess the performance of alternate adsorbents through development of numerical models for prediction of their thermal behavior under a two-step pressure swing adsorption (PSA) condition. The single-step CO 2 breakthrough and temperature profiles confirmed the efficiency of structured adsorbents in managing the thermal effects evolved in the bed under nonisothermal conditions. Two-step PSA results also showed that under real cyclic processes, and especially during rapid cycling, structured adsorbents maintain their superiority and introduce themselves as potential candidates for advanced PSA units. However, the performance of a structured adsorbent is highly dependent on its dimensions and geometrical parameters describing the structures, and these parameters should be optimized for each separation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optimum structured adsorbents for gas separation processes
Rezaei, F., & Webley, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.08.029 · Cited by 210
Self-citation
Cited by
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Property impacts on Carbon Capture and Storage (CCS) processes: A review
Tan, Y., Nookuea, W., Li, H., Thorin, E., & Yan, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.079 · Cited by 319
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments
Thakkar, H., Eastman, S., Hajari, A., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09647 · Cited by 284
Self-citationReview on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Metadata
- Authors
- Rezaei, F., & Grahn, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-01
- Volume
- 51
- Issue
- 10
- Pages
- 4025-4034
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2312416817
- Cited by
- 58
- References
- 1
- FWCI
- 5.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.