Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
Carbon dioxide removal from flue gas with a two-stage vacuum pressure swing adsorption (VPSA) process, which uses activated carbon (AC) beads as the adsorbent, was investigated both theoretically and experimentally. First, single-column VPSA experiments were studied for CO 2 /N 2 separation with high CO 2 feed concentration. Then, a two-stage VPSA process composed two columns for each stage was designed, and the effects of different parameters were investigated. The first-stage VPSA unit operates with a four-step Skarstrom cycle, which includes feed pressurization, adsorption, blowdown, and counter-current purge with N 2 . For the second-stage VPSA process, a cycle with feed pressurization, adsorption, pressure equalization, blowdown and pressure equalization was employed. With the proposed two-stage VPSA process, a CO 2 purity of 95.3% was obtained with 74.4% recovery. The total specific power consumption of the two-stage VPSA process is 723.6 kJ/kg-CO 2, while the unit productivity is 0.85 mol-CO 2 /kg·h.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They also reported the same excellent cyclability for other HTC biomass through the pressurization/vacuum cycles in the developed VSA process [199].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
In the citing paper
“The highest CO 2 and N 2 uptakes were attributed to HTC grass cutting (physically activated carbon (PAC)), which was 4 mmol.g-1 and 0.51 mmol.g -1 for HTC horse manure (PAC) at 1 bar and 0 ᵒC, respectively.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
In the citing paper
“the maximum CO 2 uptake after nine cycles was decreased only around 3%, which was an excellent cyclability.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
Citations
Cites
The "Stern Review" on the Economics of Climate Change
Nordhaus, W. (2006) · National Bureau of Economic Research · doi:10.3386/w12741 · Cited by 2,774
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Wakao, N., & Funazkri, T. (1978) · Chemical Engineering Science · doi:10.1016/0009-2509(78)85120-3 · Cited by 1,086
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416
de Wasch, A. P., & Froment, G. F. (1972) · Chemical Engineering Science · doi:10.1016/0009-2509(72)87012-x · Cited by 391
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
Membrane processes for post-combustion carbon dioxide capture: A parametric study
BOUNACEUR, R., LAPE, N., ROIZARD, D., VALLIERES, C., & FAVRE, E. (2006) · Energy · doi:10.1016/j.energy.2005.10.038 · Cited by 314
Research works printed but not linked: 3
- Gielen D., 2003, The Future Role of CO2 Capture and Storage Results of the IEA-ETP Model
- Barrer R. M., 1981, J. Chem. Technol. Biotechnol., 31, 71, 10.1002/jctb.280310111 · doi:10.1002/jctb.280310111
- Bird R. B., 2002, Transport Phenomena
Cited by
Items 101–137 of 137
Yan, P., Yang, J., Ma, D., Zhang, S., Zeng, S.-G., Feng, L., Zhan, S., & Lin, Q.-Q. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109777 · Cited by 12
Oreggioni, G. D., Friedrich, D., Brandani, S., & Ahn, H. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.709 · Cited by 11
“Since the feed gas pressure is close to atmospheric pressure, the adsorptive carbon capture design must be similar to a Pressure Vacuum Swing Adsorption (PVSA) system that has been developed for a post-combustion capture process [3 – 6].”
MethodGholami, M., Schoukens, M., Assche, T. R. C. V., & Denayer, J. F. M. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155089 · Cited by 10
Guo, Z., Deng, S., Li, S., Lian, Y., Zhao, L., & Yuan, X. (2019) · Entropy · doi:10.3390/e21030285 · Cited by 10
Chen, L., Deng, S., Zhao, R., Zhao, L., Li, S., Guo, Z., Lu, Y., Zhao, J., & Wu, K. (2020) · Energy Technology · doi:10.1002/ente.202000756 · Cited by 9
Performance-Based Screening of Porous Materials for Carbon Capture
Farmahini, A. H., Krishnamurthy, S., Friedrich, D., Brandani, S., & Sarkisov, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01266 · Cited by 7
Geng, N., Liu, N., Chu, S., Huang, Y., Bai, L., Yao, M., Guo, Y., & Zhu, T. (2026) · Nano-Micro Letters · doi:10.1007/s40820-026-02218-4 · Cited by 7
Li, X., Xu, Y., Shang, H., Liu, J., Jin, X., Wang, X., Wang, Y., Li, J., & Yang, J. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04571 · Cited by 7
Nikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C. (2017) · Wiley eBooks · doi:10.1002/9781119106418.ch13 · Cited by 7
Kralj, A. K. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.11.001 · Cited by 7
Modelling and optimization of vacuum pressure swing adsorption CO2 capture pilot using MIL-160(Al)
Henrotin, A., Heymans, N., Duprez, M., & Weireld, G. D. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2025.12.030 · Cited by 6
CO2 capture in pilot-scale unit using solid adsorbent in biomass fluidised bed boiler flue gas
Dvořák, M., Hrdlička, J., Pilař, L., Skopec, P., & Burda, J. (2025) · Acta Polytechnica · doi:10.14311/ap.2024.64.0501 · Cited by 6
“A key factor for the successful implementation of VPSA technology is a detailed understanding of adsorption isotherms, which describe the relationship between pressure, temperature, and the amount of CO 2 adsorbed on the surface of the adsorbent [2].”
Larsson, A. J., Brackmann, C., Ragucci, R., de Joannon, M., & Fatehi, H. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108241 · Cited by 5
Li, M., Li, Z., Zhuang, X., Li, Z., & Li, X. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.122467 · Cited by 5
Xing, R. S., Shi, W., Shen, Y., Liu, B., & Zhang, D. (2019) · Adsorption · doi:10.1007/s10450-019-00041-5 · Cited by 5
Perspectives of Scaling Up the Use of Zeolites for Selective Separations from Lab to Industry
Martins, V. F. D., Ribeiro, A. M., Ferreira, A. F. P., & Rodrigues, A. E. (2020) · Structure and bonding · doi:10.1007/430_2020_71 · Cited by 4
Lo, T. H., & Park, I. S. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.110338 · Cited by 4
Wang, W. L., Zhang, Y. X., Liu, W., Wang, T., Fang, M. X., & Jiang, L. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2026.03.010 · Cited by 3
Using key-component techniques for production of different products from wastes
Kralj, A. K. (2021) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2021.03.003 · Cited by 3
Kralj, A. K. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104835 · Cited by 3
Fujii, Y., Yamamoto, A., & Matsuda, K. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c01785 · Cited by 2
Low-temperature solid carbon dioxide carriers
Zhao, C., Zhao, C., & Chen, X. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-243-4.00017-3 · Cited by 2
Wu, Y. J., Wang, W. L., Zhu, Y. X., Wang, T. J., Fang, M. X., & Jiang, L. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.138449 · Cited by 1
Shankar, R., Marchesini, S., Müller, E. A., & Petit, C. (2021) · ChemRxiv · doi:10.26434/chemrxiv.12728738.v3 · Cited by 1
Adsorption et séparation de gaz en mode dynamique sur des matériaux hybrides
Soubeyrand‐Lenoir, E. (2012) · theses.fr (ABES) · doi:10.70675/8f2d5befz8043z4de6z9ddfzafd6c7457fd1 · Cited by 9
Adsorption technology for CO2 capture
Wawrzyńczak, D. (2022) · CRC Press eBooks · doi:10.1201/9781003336587-3
Carbon Capture by Swing Adsorption Processes
Ansarpour, M., & Mofarahi, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-93940-9.00091-8 · Cited by 1
Modeling and simulation of carbon capture by adsorption technologies
Dianat, M. J., Jamali, S., Mofarahi, M., & Rahimpour, M. R. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19071-1.00010-4
Niu, Z., Yao, J., Zhang, D., Liu, J., & Tang, Z. (2025) · Adsorption · doi:10.1007/s10450-025-00662-z · Cited by 2
Lujala, T. (2024) · Tampere University Institutional Repository (Tampere University)
Li, X., Li, Y., Yang, X., Zhou, Y., Shang, H., Li, J., & Yang, J. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.175270
Guilhamassé, F. (2013) · theses.fr (ABES) · doi:10.70675/31e844acz6215z45a2z8fb8z21686da2b1a2 · Cited by 1
“…5A 25 15 96 X 10.7 0.65 Shen et al. (2011) Charbon actif 30 15 43.6-63.0 40.7-96.1 56.7-104.8 X Xu et al. (2011) Charbon actif 30 12 43 80 X X Shen et al. (2012) Charbon actif 30 15 85.3-96.8 86-94.4 25.6-41.1 0.73-0.91 Liu et al. (2012) Zéolite 5A 25 15 71-81 85-91 X 2.37-3.12 A la vue des…”
InfluentialA high-throughput two-bed eight-step radial bed VPSA process for carbon capture from dry flue gas
Wang, C., Guo, W., Yin, S., Wenbin, L., & Zhang, D. (2026) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2026.100658
Johnson, O., Pimenta, F. S., Joseph, B., & Kuhn, J. N. (2026) · Journal of Environmental Management · doi:10.1016/j.jenvman.2026.130571
Ren, B., Luo, J., Yuan, H., Guo, Y., Zhao, S., Qi, T., Hejazi, S. A. H., & Hu, G. (2026) · Adsorption · doi:10.1007/s10450-026-00708-w
Han, X., Sun, B., Sun, J., Li, H., Jinren, L., Li, Y., & Bao, M. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.125410
Bessa, M. C. N., Rodrigues, A. E., Ferreira, A. F. P., & Ribeiro, A. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-40457-3.00008-1
Metadata
- Authors
- Shen, C., Liu, Z., Li, P., & Yu, J.
- Affiliations
- East China University of Science and Technology (CN)
- Corresponding author
- Li, Ping
- Yu, Jianguo
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-21
- Volume
- 51
- Issue
- 13
- Pages
- 5011-5021
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2333099367
- Semantic Scholar
- 54bf376ca7dabeb47e9a09918732c15481f28a8e
- Cited by
- 138
- References
- 31
- Citations by year
- 2026: 9 · 2025: 9 · 2024: 11 · 2023: 11 · 2022: 13 · 2021: 16 · 2020: 6 · 2019: 13 · 2018: 7 · 2017: 17 · 2016: 7 · 2015: 6 · 2014: 4 · 2013: 6 · 2012: 3
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Engineering › Computational Mechanics › Granular flow and fluidized beds
- Keywords
- CO2 capture, flue gas, vacuum pressure swing adsorption, CO2/N2 separation, pressure equalization, CO2 purity and recovery, specific power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.