Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
Carbon dioxide removal from flue gas with a two-stage vacuum pressure swing adsorption (VPSA) process, which uses activated carbon (AC) beads as the adsorbent, was investigated both theoretically and experimentally. First, single-column VPSA experiments were studied for CO 2 /N 2 separation with high CO 2 feed concentration. Then, a two-stage VPSA process composed two columns for each stage was designed, and the effects of different parameters were investigated. The first-stage VPSA unit operates with a four-step Skarstrom cycle, which includes feed pressurization, adsorption, blowdown, and counter-current purge with N 2 . For the second-stage VPSA process, a cycle with feed pressurization, adsorption, pressure equalization, blowdown and pressure equalization was employed. With the proposed two-stage VPSA process, a CO 2 purity of 95.3% was obtained with 74.4% recovery. The total specific power consumption of the two-stage VPSA process is 723.6 kJ/kg-CO 2, while the unit productivity is 0.85 mol-CO 2 /kg·h.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They also reported the same excellent cyclability for other HTC biomass through the pressurization/vacuum cycles in the developed VSA process [199].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
In the citing paper
“The highest CO 2 and N 2 uptakes were attributed to HTC grass cutting (physically activated carbon (PAC)), which was 4 mmol.g-1 and 0.51 mmol.g -1 for HTC horse manure (PAC) at 1 bar and 0 ᵒC, respectively.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
In the citing paper
“the maximum CO 2 uptake after nine cycles was decreased only around 3%, which was an excellent cyclability.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [199]
Citations
Cites
The "Stern Review" on the Economics of Climate Change
Nordhaus, W. (2006) · National Bureau of Economic Research · doi:10.3386/w12741 · Cited by 2,774
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Wakao, N., & Funazkri, T. (1978) · Chemical Engineering Science · doi:10.1016/0009-2509(78)85120-3 · Cited by 1,086
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416
de Wasch, A. P., & Froment, G. F. (1972) · Chemical Engineering Science · doi:10.1016/0009-2509(72)87012-x · Cited by 391
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
Membrane processes for post-combustion carbon dioxide capture: A parametric study
BOUNACEUR, R., LAPE, N., ROIZARD, D., VALLIERES, C., & FAVRE, E. (2006) · Energy · doi:10.1016/j.energy.2005.10.038 · Cited by 314
Research works printed but not linked: 3
- Gielen D., 2003, The Future Role of CO2 Capture and Storage Results of the IEA-ETP Model
- Barrer R. M., 1981, J. Chem. Technol. Biotechnol., 31, 71, 10.1002/jctb.280310111 · doi:10.1002/jctb.280310111
- Bird R. B., 2002, Transport Phenomena
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Abanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Self-assembled iron-containing mordenite monolith for carbon dioxide sieving
Zhou, Y., Zhang, J., Wang, L., Cui, X., Liu, X., Wong, S. S., An, H., Yan, N., Xie, J., Yu, C., et al. (2021) · Science · doi:10.1126/science.aax5776 · Cited by 379
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Advances in Pressure Swing Adsorption for Gas Separation
Grande, C. A. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/982934 · Cited by 285
Gunawardene, O. H. P., Gunathilake, C. A., Vikrant, K., & Amaraweera, S. M. (2022) · Atmosphere · doi:10.3390/atmos13030397 · Cited by 249
Riboldi, L., & Bolland, O. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1385 · Cited by 256
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
CO2 capture from dry flue gas by means of VPSA, TSA and TVSA
Jiang, N., Shen, Y., Liu, B., Zhang, D., Tang, Z., Li, G., & Fu, B. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.09.012 · Cited by 195
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation
Li, H., Dilipkumar, A., Abubakar, S., & Zhao, D. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00465h · Cited by 191
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
A comprehensive review of carbon capture science and technologies
Wu, C., Huang, Q., Xu, Z., Sipra, A. T., Gao, N., Vandenberghe, L. P. D. S., Vieira, S., Soccol, C. R., Zhao, R., Deng, S., et al. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2023.100178 · Cited by 165
Wang, L., Liu, Z., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.017 · Cited by 161
Self-citationBen-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Kong, M. G., Song, L., Liao, H., Zhang, S., Wang, Y., Deng, X., & Feng, W. (2024) · Fuel · doi:10.1016/j.fuel.2024.132103 · Cited by 155
Natural Products Derived Porous Carbons for CO 2 Capture
Khosrowshahi, M. S., Mashhadimoslem, H., Shayesteh, H., Singh, G., Khakpour, E., Guan, X., Rahimi, M., Maleki, F., Kumar, P., & Vinu, A. (2023) · Advanced Science · doi:10.1002/advs.202304289 · Cited by 131
Qasem, N. A. A., & Mansour, R. B. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.098 · Cited by 120
Akinola, T. E., Prado, P. L. B., & Wang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119156 · Cited by 119
Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112
Experiment and simulation for separating CO2/N2 by dual-reflux pressure swing adsorption process
Li, D., Zhou, Y., Shen, Y., Sun, W., Fu, Q., Yan, H., & Zhang, D. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.075 · Cited by 112
Leperi, K. T., Yancy-Caballero, D. M., Snurr, R. Q., & You, F. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02383 · Cited by 107
Leperi, K. T., Snurr, R. Q., & You, F. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03122 · Cited by 104
Carbon pump: Fundamental theory and applications
Zhao, R., Deng, S., Liu, Y., Zhao, Q., He, J., & Zhao, L. (2016) · Energy · doi:10.1016/j.energy.2016.11.076 · Cited by 98
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.07.028 · Cited by 96
Self-citationZhao, Q., Wu, F., Men, Y., Fang, X., Zhao, J., Xiao, P., Webley, P. A., & Grande, C. A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.196 · Cited by 88
CO2 Dynamics in Pure and Mixed-Metal MOFs with Open Metal Sites
Marti, R. M., Howe, J. D., Morelock, C. R., Conradi, M. S., Walton, K. S., Sholl, D. S., & Hayes, S. E. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07179 · Cited by 87
Oreggioni, G. D., Brandani, S., Luberti, M., Baykan, Y., Friedrich, D., & Ahn, H. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.01.008 · Cited by 86
“purities higher than 95% (Wang et al., 2013; Shen et al., 2012) when applied for post-combustion carbon capture.”
BackgroundInfluentialNikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04270 · Cited by 80
Dhoke, C., Cloete, S. W. P., Krishnamurthy, S., Seo, H., Luz, I., Soukri, M., Park, Y.-K., Blom, R., Amini, S., & Zaabout, A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122201 · Cited by 84
The pilot dual-reflux vacuum pressure swing adsorption unit for CO2 capture from flue gas
Wawrzyńczak, D., Majchrzak-Kucęba, I., Srokosz, K., Kozak, M., Nowak, W., Zdeb, J., Smółka, W., & Zajchowski, A. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.07.079 · Cited by 77
Mondino, G., Grande, C. A., Blom, R., & Nord, L. O. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.03.021 · Cited by 74
Plaza, M. G., Rubiera, F., & Pevida, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01508 · Cited by 68
Gonzalez‐Olmos, R., Gutierrez-Ortega, A., Sempere, J., & Nomen, R. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101791 · Cited by 70
CO2 capture from flue gas by two successive VPSA units using 13XAPG
Wang, L., Liu, Z., Li, P., Wang, J., & Yu, J. (2012) · Adsorption · doi:10.1007/s10450-012-9431-1 · Cited by 69
Self-citationOreggioni, G. D., Singh, B., Cherubini, F., Guest, G., Lausselet, C., Luberti, M., Ahn, H., & Strømman, A. H. (2017) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.11.025 · Cited by 68
Exergy analyses of the oxygen blast furnace with top gas recycling process
We, Z., Zhang, J., & Xue, Z. (2016) · Energy · doi:10.1016/j.energy.2016.12.125 · Cited by 67
García, E. J., Pérez-Pellitero, J., Pirngruber, G. D., Jallut, C., Palomino, M., Rey, F., & Valencia, S. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500207s · Cited by 63
Patel, H., Mohanty, A. K., & Misra, M. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114484 · Cited by 62
Yan, H., Fu, Q., Zhou, Y., Li, D., & Zhang, D. (2016) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.04.005 · Cited by 57
Ramar, V., & Balraj, A. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c02585 · Cited by 53
Application of carbon fibre composites to CO2 capture from flue gas
Thiruvenkatachari, R., Su, S., Yu, X. X., & Bae, J. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.12.014 · Cited by 54
Liu, B., Lian, Y., Li, S., Deng, S., Zhao, L., Chen, B., & Wang, D. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.06.008 · Cited by 54
Luberti, M., Oreggioni, G. D., & Ahn, H. (2017) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.07.029 · Cited by 52
“…kPa 1 st : 0.25 2 nd : 0.05 96.6 97.9 594.0 0.72 Wang et al., 2012 2-stage VPSA AC beads 15.0 2 10 kPa 1 st : N/A 1 2 nd : X 2 95.3 74.4 723.6 0.85 Shen et al., 2012 2-stage VPSA AC beads 15.0 2 5 kPa 1 st : N/A 1 2 nd : X 2 96.3 80.7 829.3 0.93 Shen et al., 2012 2-stage VPSA 1 st :13XAPG 2 nd…”
BackgroundMethodInfluentialModeling of CO2 adsorption and recovery from wet flue gas by using activated carbon
You, Y. Y., & Liu, X. J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.118 · Cited by 52
CO2 capture by vacuum swing adsorption: role of multiple pressure equalization steps
Ntiamoah, A., Ling, J., Xiao, P., Webley, P. A., & Zhai, Y. (2015) · Adsorption · doi:10.1007/s10450-015-9690-8 · Cited by 49
“A two-stage VSA process, comprising simple cycles without the heavy reflux step for each stage, can also yield higher separation efficiency (Cho et al. 2004; Shen et al. 2012).”
Lian, Y., Deng, S., Li, S., Guo, Z., Zhao, L., & Yuan, X. (2019) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2019.03.029 · Cited by 48
Green coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
“Experimental and simulation studies have confirmed these results using different cycle configurations [5, 28, 29].”
MethodResultNikolaidis, G. N., Kikkinides, E. S., & Georgiadis, M. C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02845 · Cited by 45
Are we missing something when evaluating adsorbents for CO 2 capture at the system level?
Balogun, H. A., Bahamón, D., AlMenhali, S., Vega, L. F., & AlHajaj, A. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01677f · Cited by 45
Sulfur doped microporous carbons for CO 2 adsorption
Shi, J., Yan, N., Cui, H., Liu, Y., & Weng, Y. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.002 · Cited by 44
CO2 Capture from Flue Gas of a Coal-Fired Power Plant Using Three-Bed PSA Process
Cheng, C.-Y., Kuo, C. C., Yang, M., Zhuang, Z.-Y., Lin, P.-W., Chen, Y., Yang, H.-S., & Chou, C.-T. (2021) · Energies · doi:10.3390/en14123582 · Cited by 43
“[27] used activated carbon in a two-stage vacuum PSA (VPSA) process to separate a flue gas of 15 vol% CO2.”
MethodYu, X., Liu, B., Shen, Y., & Zhang, D. (2021) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2021.02.022 · Cited by 40
Adsorption separation of CO from syngas with CuCl@AC adsorbent by a VPSA process
Gao, F., Wang, S., Wang, W., Duan, J., Dong, J., & Chen, G. (2018) · RSC Advances · doi:10.1039/c8ra08578a · Cited by 40
Zhao, R., Deng, S., Zhao, L., Zhao, Y., Li, S., Zhang, Y., & Yu, Z. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.057 · Cited by 40
Tian, J., Shen, Y., Zhang, D., & Tang, Z. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106037 · Cited by 37
Wang, Z., Shen, Y., Zhang, D., Tang, Z., & Li, W. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108031 · Cited by 44
Recent advances on the modeling and optimization of CO2 capture processes
Chatziasteriou, C. C., Kikkinides, E. S., & Georgiadis, M. C. (2022) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2022.107938 · Cited by 37
Wu, K., Deng, S., Li, S., Zhao, R., Yuan, X., & Zhao, L. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100035 · Cited by 39
Zaabout, A., Romano, M. C., Cloete, S. W. P., Giuffrida, A., Morud, J. C., Chiesa, P., & Amini, S. (2017) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2017.03.001 · Cited by 34
Nogueira, I. B. R., Martins, M. A. F., Regufe, M. J., Rodrigues, A. E., LOUREIRO, J. M., & Ribeiro, A. M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01155 · Cited by 32
Chen, S., Wu, W., Niu, Z., Kong, D., Li, W., Tang, Z., & Zhang, D. (2023) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2023.10.015 · Cited by 31
Adsorptive cyclic purification process for CO2 mixtures captured from coal power plants
Kim, Y., Kim, J.-J., & Lee, C. (2016) · AIChE Journal · doi:10.1002/aic.15440 · Cited by 30
Techno-economic analysis of bio-methane production from agriculture and food industry waste
Oreggioni, G. D., Luberti, M., Reilly, M., Kirby, M. E., Toop, T. A., Theodorou, M. K., & Tassou, S. A. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.07.252 · Cited by 30
“The use of two stages is commonly suggested in order to meet the required separation target with a lower energy consumption [20-22].”
BackgroundBargougui, R., Bouazizi, N., Brun, N., Fotsing, P. N., Thoumire, O., Ladam, G. D., Woumfo, E. D., Mofaddel, N., Derf, F. L., & Vieillard, J. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.11.079 · Cited by 30
Vacuum swing CO2 adsorption cycles in Waste-to-Energy plants
Durán, I., Rubiera, F., & Pevida, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122841 · Cited by 29
Horstmeier, J. F., Lopez, A. G., & Agar, D. W. (2016) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.02.013 · Cited by 29
Li, S., Feng, Y., Li, Y., Deng, S., Cao, X. E., Lee, K. B., & Wang, J. (2024) · Matter · doi:10.1016/j.matt.2024.01.003 · Cited by 27
Evaluation of carbon dioxide–nitrogen separation through fixed bed measurements and simulations
Rios, R. B., Correia, L. S., Bastos-Neto, M., Torres, A. E. B., Hatimondi, S. A., Ribeiro, A. M., Rodrigues, A. E., Cavalcante, C. L., & Azevedo, D. C. S. (2014) · Adsorption · doi:10.1007/s10450-014-9639-3 · Cited by 30
“Recent studies have shown suitable results by combining both processes in a vacuum pressure swing adsorption (VPSA) for CO2 capture from flue gas (Liu et al. 2011; Shen et al. 2012; Wang et al. 2012; Liu et al. 2012).”
BackgroundApplication of metal-organic frameworks in VPSA technology for CO2 capture
Majchrzak‐Kucęba, I., Wawrzyńczak, D., & Ściubidło, A. (2019) · Fuel · doi:10.1016/j.fuel.2019.115773 · Cited by 27
Zheng, S., Shi, Y., Wang, Z., Wang, P., Liu, G., & Zhou, H. (2021) · International Journal of Coal Science & Technology · doi:10.1007/s40789-021-00420-w · Cited by 25
Mondino, G., Grande, C. A., & Blom, R. (2017) · Energies · doi:10.3390/en10060745 · Cited by 24
Prats, H., Bahamón, D., Giménez, X., Gamallo, P., & Sayós, R. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.013 · Cited by 23
“𝑢 superficial gas velocity (m·s-1) 𝑈$% potential energy between a pair of atoms 𝑖 and 𝑗 (kJ·mol-1) 𝑈[ total potential energy of an isolated guest molecule (kJ·mol-1) 𝑉 total volume of packed bed (m3) VOC Volatile Organic Compounds VPSA Volume Pressure Swing Adsorption VSA Volume Swing Adsorption 𝑊 adiabatic energy req…”
MethodYan, P., Li, X., Ma, D., Li, L., Lan, Y., Li, Z., Lu, X., Yang, M., & Liang, F. (2022) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2022.123566 · Cited by 22
Takakura, Y., Sugimoto, S., Fujiki, J., Kajiro, H., Yajima, T., & Kawajiri, Y. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05058 · Cited by 22
Sabri, N. H., Rani, N. H. A., MOHAMAD, N. F., Muhsen, N. A. S. M., & Zaini, M. S. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.12.206 · Cited by 23
Wilkes, M. D., & Brown, S. (2021) · Energy · doi:10.1016/j.energy.2022.123805 · Cited by 23
Kim, T., Kim, K., Lee, G., Seo, M., & Hwang, J. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00053-0 · Cited by 23
Strategies for CO2 capture from different CO2 emission sources by vacuum swing adsorption technology
Ling, J., Xiao, P., Ntiamoah, A., Xu, D., Webley, P., & Zhai, Y. (2016) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2015.11.030 · Cited by 21
Dhoke, C., Zaabout, A., Cloete, S. W. P., Seo, H., Park, Y.-K., Blom, R., & Amini, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.082 · Cited by 21
Marcantonio, V., Falco, M. D., & Bocci, E. (2022) · Energies · doi:10.3390/en15207790 · Cited by 20
Tingelinhas, J., Saragoça, C., Mohtar, A. A., Mateus, M. M., & Pinto, M. L. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c04209 · Cited by 20
Gebremariam, S. K., Wahedi, Y. A., AlHajaj, A., Dumée, L. F., & Karanikolos, G. N. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159384 · Cited by 22
You, Y. Y., & Liu, X. J. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117922 · Cited by 20
Du, Y., Gai, W.-M., & Jin, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.019 · Cited by 18
Majchrzak‐Kucęba, I., Wawrzyńczak, D., Ściubidło, A., Zdeb, J., Smółka, W., & Zajchowski, A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.11.003 · Cited by 18
Underlying potential evaluation of the real-process applications of magnetic porous liquids
Mahdavi, H., Sadiq, M., Smith, S. J. D., Mulet, X., & Hill, M. R. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta02602g · Cited by 17
Takakura, Y., Ravutla, S., Kim, J., Ikeda, K., Kajiro, H., Yajima, T., Fujiki, J., Boukouvala, F., Realff, M. J., & Kawajiri, Y. (2024) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2024.104260 · Cited by 17
Parameter screening of a VPSA cycle with automated breakthrough control for carbon capture
Gutierrez-Ortega, A., Melis, A., Nomen, R., Sempere, J., Fernández-García, J., Pou, J. O., & Gonzalez‐Olmos, R. (2023) · Fuel · doi:10.1016/j.fuel.2022.127298 · Cited by 17
Aly, E., Zafanelli, L. F. A. S., Henrique, A., Gleichmann, K., Rodrigues, A. E., Freitas, F. A. D. S., & Silva, J. A. C. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.131519 · Cited by 17
Shang, H., Zhang, X., Li, X., Zhang, F., Tang, X., Li, J., & Yang, J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139538 · Cited by 16
Cloete, S. W. P., Giuffrida, A., Romano, M. C., & Zaabout, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.196 · Cited by 16
Enrichment of CO from syngas with Cu(I)Y adsorbent by five-bed VPSA
Li, S., Yang, H., & Zhang, D. (2013) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-013-1351-4 · Cited by 15
Chung, W., Kim, J., Jung, H., & Lee, J. H. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153664 · Cited by 13
Chen, Y., & Ahn, H. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.130356 · Cited by 12
Chatziasteriou, C. C., Georgiadis, M. C., & Kikkinides, E. S. (2024) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2024.05.016 · Cited by 15
Metadata
- Authors
- Shen, C., Liu, Z., Li, P., & Yu, J.
- Affiliations
- East China University of Science and Technology (CN)
- Corresponding author
- Li, Ping
- Yu, Jianguo
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-21
- Volume
- 51
- Issue
- 13
- Pages
- 5011-5021
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2333099367
- Semantic Scholar
- 54bf376ca7dabeb47e9a09918732c15481f28a8e
- Cited by
- 138
- References
- 31
- Citations by year
- 2026: 9 · 2025: 9 · 2024: 11 · 2023: 11 · 2022: 13 · 2021: 16 · 2020: 6 · 2019: 13 · 2018: 7 · 2017: 17 · 2016: 7 · 2015: 6 · 2014: 4 · 2013: 6 · 2012: 3
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Engineering › Computational Mechanics › Granular flow and fluidized beds
- Keywords
- CO2 capture, flue gas, vacuum pressure swing adsorption, CO2/N2 separation, pressure equalization, CO2 purity and recovery, specific power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.