The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Modeling, Simulation, and Optimization of Postcombustion CO2Capture for Variable Feed Concentration and Flow Rate. 2. Pressure Swing Adsorption and Vacuum Swing Adsorption Processes
Abstract
This paper reports studies on CO 2 capture technologies and presents the mathematical modeling, simulation, and optimization of adsorption-based process alternatives, namely, pressure swing adsorption (PSA) and vacuum swing adsorption (VSA). Each technology includes feed dehydration, capture of at least 90% of CO 2 from the feed, and compression to almost pure CO 2 for sequestration at 150 bar. Each process alternative is optimized over a range of feed CO 2 compositions and flow rates. A superstructure of alternatives is developed to select the optimum dehydration strategy for feed to each process. A four-step process with pressurization, adsorption in multiple columns packed with 13X zeolite, N 2 purging, and product recovery at moderate to low vacuum is configured. A nonlinear algebraic and partial differential equation (NAPDE) based nonisothermal adsorption model is used, which is fully discretized and solved via a kriging model. Explicit expressions for costs as functions of feed flow rate and CO 2 composition are also developed for the PSA- and VSA-based CO 2 capture and compression for the first time. Furthermore, a cost-based comparison of four leading CO 2 capture technologies, namely, absorption-, membrane-, PSA-, and VSA-based processes, is presented over a range of flue gas compositions and flow rates. This enables selection of the most cost-effective CO 2 capture and storage (CCS) technology for diverse emission scenarios. Results indicate that CO 2 can be captured with the least cost using a MEA-based chemical absorption when the feed CO 2 composition is less than 15–20%. For higher CO 2 compositions, VSA is the preferred process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Global Optimization of Expensive Black-Box Functions
Jones, D. R., Schonlau, M., & Welch, W. J. (1998) · Journal of Global Optimization · doi:10.1023/a:1008306431147 · Cited by 8,070
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Bahamon, D., Ogungbenro, A. E., Khaleel, M., Abu-Zahra, M. R. M., & Vega, L. F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05542 · Cited by 31
Fischer, M., & Bell, R. G. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405507y · Cited by 24
Metadata
- Authors
- Hasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-11-26
- Volume
- 51
- Issue
- 48
- Pages
- 15665-15682
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2332033701
- Cited by
- 204
- References
- 3
- FWCI
- 18.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling, Simulation, and Optimization of Postcombustion CO2Capture for Variable Feed Concentration and Flow Rate. 2. Pressure Swing Adsorption and Vacuum Swing Adsorption Processes. https://app.cochat.ai/papers/10.1021/ie301572n
- The paper
- Hasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A. (2012). Modeling, Simulation, and Optimization of Postcombustion CO2Capture for Variable Feed Concentration and Flow Rate. 2. Pressure Swing Adsorption and Vacuum Swing Adsorption Processes. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie301572n
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.