Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The catalytic cracking of HDPE (high density polyethylene) at 500 °C using a spent FCC catalyst agglomerated with bentonite (50 wt %) has been studied in a conical spouted bed reactor. The reaction is carried out in continuous regime (1 g min –1 of HDPE is fed) with no bed defluidization problems. The results obtained, namely, total conversion, and high yields of gasoline (C 5 –C 11 fraction) (50 wt %) and C 2 –C 4 olefins (28 wt %), are explained by favorable reactor conditions and good catalyst properties. These results are compared with those for a catalyst prepared in the laboratory by agglomerating a commercial HY zeolite (SiO 2 /Al 2 O 3 = 5.2). The conical spouted bed is a suitable reactor for enhancing the physical steps of melting the polymer and coating the catalyst with the melted polymer. Furthermore, high heat and mass transfer rates promote devolatilization, and short residence times minimize secondary reactions from olefins by enhancing primary cracking products. The meso- and macroporous structure of the spent FCC catalyst matrix enhances the diffusion of long polymer chains, whereas the zeolite crystals have micropores that give a proper shape selectivity to form the lumps of gasoline and light olefins. Because of long use in reaction–regeneration cycles, the moderate acidity of the spent FCC catalyst minimizes the secondary reactions of hydrogen transfer, and so restricts the formation of aromatics and paraffins, as well as the reactions of overcracking and condensation and, therefore, the coke formation. The spent FCC catalyst exhibits a low deactivation rate and is regenerable by coke combustion with air at 550 °C. Consequently, the use of a catalyst with the sole cost of a simple agglomeration and the production of value added product streams make the process of polyolefin catalytic cracking a promising option for refinery integration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cerqueira, H. S., Caeiro, G., Costa, L., & Ramôa Ribeiro, F. (2008) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2008.06.014 · Cited by 425
Recycling of waste plastics into fuels. LDPE conversion in FCC
Passamonti, F. J., & Sedran, U. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.06.020 · Cited by 115
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Self-citationOchoa, A., Bilbao, J., Gayubo, A. G., & Castaño, P. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109600 · Cited by 547
Self-citationPyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Metadata
- Authors
- Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-18
- Volume
- 51
- Issue
- 43
- Pages
- 14008-14017
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2328231871
- Cited by
- 89
- References
- 2
- FWCI
- 0.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed. https://app.cochat.ai/papers/10.1021/ie3018274
- The paper
- Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012). Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie3018274
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.