CoChat

Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed

Elordi, Gorka, Olazar, Martin, Castaño, Pedro, Artetxe, Maite, Bilbao, Javier · 2012 · Industrial & Engineering Chemistry Research
Cited by 89

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

The catalytic cracking of HDPE (high density polyethylene) at 500 °C using a spent FCC catalyst agglomerated with bentonite (50 wt %) has been studied in a conical spouted bed reactor. The reaction is carried out in continuous regime (1 g min –1 of HDPE is fed) with no bed defluidization problems. The results obtained, namely, total conversion, and high yields of gasoline (C 5 –C 11 fraction) (50 wt %) and C 2 –C 4 olefins (28 wt %), are explained by favorable reactor conditions and good catalyst properties. These results are compared with those for a catalyst prepared in the laboratory by agglomerating a commercial HY zeolite (SiO 2 /Al 2 O 3 = 5.2). The conical spouted bed is a suitable reactor for enhancing the physical steps of melting the polymer and coating the catalyst with the melted polymer. Furthermore, high heat and mass transfer rates promote devolatilization, and short residence times minimize secondary reactions from olefins by enhancing primary cracking products. The meso- and macroporous structure of the spent FCC catalyst matrix enhances the diffusion of long polymer chains, whereas the zeolite crystals have micropores that give a proper shape selectivity to form the lumps of gasoline and light olefins. Because of long use in reaction–regeneration cycles, the moderate acidity of the spent FCC catalyst minimizes the secondary reactions of hydrogen transfer, and so restricts the formation of aromatics and paraffins, as well as the reactions of overcracking and condensation and, therefore, the coke formation. The spent FCC catalyst exhibits a low deactivation rate and is regenerable by coke combustion with air at 550 °C. Consequently, the use of a catalyst with the sole cost of a simple agglomeration and the production of value added product streams make the process of polyolefin catalytic cracking a promising option for refinery integration.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie3018274

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

Metadata

Authors
Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J.
Venue
Industrial & Engineering Chemistry Research
Published
2012-10-18
Volume
51
Issue
43
Pages
14008-14017
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2328231871
Cited by
89
References
2
FWCI
0.70
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.