MgO/CaO-Loaded Activated Carbon for Carbon Dioxide Capture: Practical Aspects of Use
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Porous carbons loaded with CaO and MgO were prepared through a one-step process from mixtures of poly(ethylene terephthalate) and dolomite mineral. Obtained hybrid materials were examined as sorbents for CO 2 gas contained in air. The influence of pore structure, loadings of the oxides, moisture, and temperature on the efficiency of gas removal is presented and discussed. Performance of the materials during CO 2 capture was confirmed to be influenced by all mentioned factors. As a rule, efficiency of CO 2 removal increased along with loading of the oxides. CO 2 uptake increased also with moisture content and temperature of the bed. On the basis of attained results, optimal parameters for operational use are suggested and probable mechanisms of the CO 2 removal from dry and humid air are proposed. Cyclic sorption–desorption experiments confirmed capability of the material for several-times use. Superior performance of the hybrid materials over a mixture of CaO and MgO is confirmed and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Infrared Study of Carbon Dioxide Adsorbed on Magnesium and Calcium Oxides
Fukuda, Y., & Tanabe, K. (1973) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.46.1616 · Cited by 140
Interaction of CO2 with Magnesium Oxide Surfaces: a TPD, FTIR, and Cluster-Model Calculation Study
Yanagisawa, Y., Takaoka, K., Yamabe, S., & Ito, T. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100011a043 · Cited by 76
Cited by
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Review of post-combustion carbon dioxide capture technologies using activated carbon
Mukherjee, A., Okolie, J. A., Abdelrasoul, A., Niu, C., & Dalai, A. K. (2019) · Journal of Environmental Sciences · doi:10.1016/j.jes.2019.03.014 · Cited by 384
Chemical activation of biochar for energy and environmental applications: a comprehensive review
Sajjadi, B., Zubatiuk, T., Leszczynska, D., Leszczynski, J., & Chen, W. Y. (2019) · Reviews in Chemical Engineering · doi:10.1515/revce-2018-0003 · Cited by 338
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Metadata
- Authors
- Przepiórski, J., Czyżewski, A., Pietrzak, R., & Morawski, A. W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-05-09
- Volume
- 52
- Issue
- 20
- Pages
- 6669-6677
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2318496208
- Cited by
- 39
- References
- 2
- FWCI
- 1.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: MgO/CaO-Loaded Activated Carbon for Carbon Dioxide Capture: Practical Aspects of Use. https://app.cochat.ai/papers/10.1021/ie302848r
- The paper
- Przepiórski, J., Czyżewski, A., Pietrzak, R., & Morawski, A. W. (2013). MgO/CaO-Loaded Activated Carbon for Carbon Dioxide Capture: Practical Aspects of Use. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie302848r
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.