Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 164

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Stability of Supported Amine Adsorbents to SO2 and NOx in Postcombustion CO2 Capture. 1. Single-Component Adsorption

Rezaei, Fateme, Jones, Christopher W.·2013·Industrial & Engineering Chemistry Research

Abstract

Flue gases from coal-fired power plants typically contain not only CO 2 but other acid-gas impurities such as SO x and NO x that can dramatically influence the CO 2 capture efficiency. Whereas postcombustion CO 2 capture by aminosilica materials has been extensively studied over the past few years because of their high equilibrium CO 2 capacities, the performance of these materials under realistic conditions (in the presence of SO x, NO x, and O 2 ) remains relatively unexplored. In this study, the degree of irreversible binding of SO 2, NO, and NO 2 to four supported amine adsorbents is evaluated to assess the SO 2, NO, and NO 2 adsorption capacities of aminosilica sorbents and their effects on the CO 2 adsorption capacities. Adsorbents constructed using poly(ethyleneimine) and three different silane coupling agents (based on propyltrimethoxysilane linkers) with primary, secondary, and tertiary amines are evaluated. Under the experimental conditions used in this investigation, it is found that primary amines with high amine loadings displayed more affinity toward NO than their secondary and tertiary amine counterparts. However, overall, NO adsorption on the aminosilica adsorbents is low, and therefore, the CO 2 capacities of the adsorbent materials exposed to NO remained almost unchanged after the exposure. In contrast, all materials showed a very high nitrogen dioxide adsorption capacity upon exposure to NO 2 . As a result, all adsorbents treated with NO 2 exhibited a dramatic reduction in CO 2 capacity, which corresponds to the deactivation of amine groups due to the irreversible binding of NO 2 . In addition, our results indicate that SO 2 adsorbed significantly on supported amine adsorbents, resulting in a dramatic loss in CO 2 capacity during CO 2 capture from flue gas. With similar amine loadings, although secondary amines exhibited higher affinity to SO 2, their CO 2 capacity loss after exposure to SO 2 is lower than that of primary amines, indicating that these materials are more stable in the presence of SO 2, which implies that more SO 2 desorbs from secondary amines during the desorption step. These results suggest that for silica-supported amine materials to be useful in practical CO 2 capture applications, it is necessary to significantly reduce the SO 2 and NO 2 concentrations of the flue gas prior to the CO 2 capture process. On the other hand, the capture efficiency of these materials does not change significantly in the presence of NO. This suggests that such materials might be promising for postcombustion CO 2 capture from flue gas streams derived from natural gas combustion, as these streams typically contain reduced SO 2 concentrations but can still have significant NO x concentrations.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie4019116

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 164

Metadata

Authors
Rezaei, F., & Jones, C. W.
Venue
Industrial & Engineering Chemistry Research
Published
2013-08-13
Volume
52
Issue
34
Pages
12192-12201
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2319500290
Cited by
164
References
2
FWCI
11.07
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Stability of Supported Amine Adsorbents to SO2 and NOx in Postcombustion CO2 Capture. 1. Single-Component Adsorption. https://app.cochat.ai/papers/10.1021/ie4019116
The paper
Rezaei, F., & Jones, C. W. (2013). Stability of Supported Amine Adsorbents to SO2 and NOx in Postcombustion CO2 Capture. 1. Single-Component Adsorption. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie4019116

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.