Tuning the Adsorption Properties of Zeolites as Adsorbents for CO2 Separation: Best Compromise between the Working Capacity and Selectivity
Open accessThe DOI matches its Crossref record; 48 of the 50 references it cites were found in a registry or an index.
Abstract
The choice of an appropriate adsorbent for CO 2 separation by pressure-swing adsorption remains a field of intense research. In this work, several FAU and LTA zeolites with different Na contents (Si/Al ratios) are studied for the separation of CO 2 from mixtures of CO 2, CO, and CH 4 by means of breakthrough experiments. The breakthrough experiments were carried out between 1 and 5 bar at 303 K using two feed mixtures: 50/50 (v/v) CO 2 /CH 4 and 75/15/15 (v/v/v) CO 2 /CH 4 /CO. The most polar zeolites, i.e., those with high Na content, exhibit the highest adsorption capacity and selectivity for CO 2, but their regeneration is difficult; hence, their working capacity is low. The opposite is true for the least polar zeolites, i.e., those with low Na content. In order to quantify the trade-off between the selectivity and working capacity, the Ruthven statistical model (RSM) was used. It satisfactorily reproduced the experimental trends. We, therefore, used the RSM to identify the properties of the adsorbent that lead to an optimal compromise between the working capacity and separation factor. The critical parameter is the concentration of extraframework cations, which, in turn, depends on the framework charge of the zeolites FAU and LTA. The optimal trade-off zone is defined in terms of the Henry constant of CO 2 ( K CO 2 ). It is found that this zone is placed between K CO 2 = 5 × 10 –3 and 50 × 10 –3 molecules·bar –1 ·Å –3 . This interval corresponds to a heat of adsorption of CO 2 at zero coverage between 27 and 32 kJ·mol –1 . In our study, this optimal range of Henry constants was achieved for the zeolites Na-USY, SAPO-37, LTA (Si/Al = 5), and EMC-1.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“There are different ways that zeolitic adsorbents may be selective toward CO2. One is by exploiting differences in the interaction strength, i.e., the heat of adsorption, of the two adsorbates. Another possibility involves discriminating between their sizes, e.g., molecular sieving. More complex mechanisms, such as trapdoor mechanisms and guest-induced structure flexibility, are also interesting,”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“In consequence, these materials present large thermodynamic CO2/CH4 selectivities.”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“Selectivity on low silica (highly polar) zeolites, such as A, X, and Y zeolites, is achieved by the first mechanism. CO2 adsorbs more strongly than methane on these materials due to the electrostatic interaction of its quadrupolar moment with the extraframework cations.483”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“Lower polarity FAU, CHA, and LTA materials present good selectivities, intermediate working capacities, and moderate heats of adsorption in the range of 27–33 kJ/mol, described as optimal for a thermodynamic separation.483”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“However, this is disadvantageous for the regeneration step, as a higher energy input, i.e., higher temperatures in TSA or lower pressures in PSA processes, will be needed for desorbing the strongly adsorbed (or even chemically bonded) CO2.”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Sing, K. S. W. (1982) · Pure and Applied Chemistry · doi:10.1351/pac198254112201 · Cited by 2,091
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Metallo-organic molecular sieve for gas separation and purification
Min Wang, Q., Shen, D., Bülow, M., Ling Lau, M., Deng, S., Fitch, F. R., Lemcoff, N. O., & Semanscin, J. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00405-5 · Cited by 771
Crystalline Zeolites. I. The Properties of a New Synthetic Zeolite, Type A
Breck, D. W., Eversole, W. G., Milton, R. M., Reed, T. B., & Thomas, T. L. (1956) · Journal of the American Chemical Society · doi:10.1021/ja01604a001 · Cited by 634
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Natural gas treating by selective adsorption: Material science and chemical engineering interplay
Tagliabue, M., Farrusseng, D., Valencia, S., Aguado, S., Ravon, U., Rizzo, C., Corma, A., & Mirodatos, C. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.010 · Cited by 471
Self-citationDunne, J. A., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960496r · Cited by 468
Research works printed but not linked: 1
- Keller J., 2005, Experimental Methods and Adsorption Isotherms
Cited by
Zeolites in Adsorption Processes: State of the Art and Future Prospects
Pérez-Botella, E., Valencia, S., & Rey, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00140 · Cited by 1,126
Self-citationAdvances in applied supramolecular technologies
Williams, G. T., Haynes, C. J. E., Fares, M., Caltagirone, C., Hiscock, J. R., & Gale, P. A. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00948b · Cited by 188
Assessing CH4/N2 separation potential of MOFs, COFs, IL/MOF, MOF/Polymer, and COF/Polymer composites
Gulbalkan, H. C., Haslak, Z. P., Altintas, C., Uzun, A., & Keskin, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131239 · Cited by 186
Xian, S., Peng, J., Zhang, Z., Xia, Q., Wang, H., & Li, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.041 · Cited by 142
Scott, H. S., Shivanna, M., Bajpai, A., Madden, D. G., Chen, K., Pham, T., Forrest, K. A., Hogan, A., Space, B., Perry, J. J., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15250 · Cited by 139
Development of zeolite adsorbents for CO2 separation in achieving carbon neutrality
Tao, Z., Tian, Y., Wu, W., Liu, Z., Fu, W., Kung, C., & Shang, J. (2024) · npj Materials Sustainability · doi:10.1038/s44296-024-00023-x · Cited by 123
Durán, I., Álvarez-Gutiérrez, N., Rubiera, F., & Pevida, C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.100 · Cited by 102
“[38] measured adsorption capacities for CO2 up to 5.”
BackgroundInfluence of the Compensating Cation Nature on the Water Adsorption Properties of Zeolites
Tahraoui, Z., Nouali, H., Marichal, C., Forler, P., Klein, J., & Daou, T. J. (2020) · Molecules · doi:10.3390/molecules25040944 · Cited by 83
Li, T., An, X., & Fu, D. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00941 · Cited by 71
Cai, X., Gharagheizi, F., Bingel, L. W., Shade, D., Walton, K. S., & Sholl, D. S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05398 · Cited by 69
Identification of High-CO2-Capacity Cationic Zeolites by Accurate Computational Screening
Fang, H., Kulkarni, A., Kamakoti, P., Awati, R., Ravikovitch, P. I., & Sholl, D. S. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01132 · Cited by 67
Park, J., Landa, H. O. R., Kawajiri, Y., Realff, M. J., Lively, R. P., & Sholl, D. S. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05363 · Cited by 62
Park, J., Lively, R. P., & Sholl, D. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02916k · Cited by 52
Unusually Low Heat of Adsorption of CO2 on AlPO and SAPO Molecular Sieves
Pérez-Botella, E., Martínez-Franco, R., González-Camuñas, N., Cantín, Á., Palomino, M., Moliner, M., Valencia, S., & Rey, F. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.588712 · Cited by 47
“Materials that have been studied as adsorbents for CO2 include carbonaceous materials, metalorganic frameworks (MOFs), covalent organic frameworks (COFs), supported amines, zeolites, AlPOs, and SAPOs (Lee et al., 2008; Tagliabue et al., 2009; Liu et al., 2011; Cheung et al., 2012; Lee and Park, 2015; Fischer, 2017; Ri…”
Self-citationZeolite synthesis in hydrated silicate ionic liquids
Tendeloo, L. V., Haouas, M., Martens, J. A., Kirschhock, C. E. A., Breynaert, E., & Taulelle, F. (2014) · Faraday Discussions · doi:10.1039/c4fd00234b · Cited by 46
Permselectivity improvement in membranes for CO2/N2 separation
Fernández‐Barquín, A., Casado‐Coterillo, C., Palomino, M., Valencia, S., & Irabien, Á. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.11.032 · Cited by 45
Self-citationTan, J. Z., Bregante, D. T., Torres, C., & Flaherty, D. W. (2021) · Journal of Catalysis · doi:10.1016/j.jcat.2021.11.029 · Cited by 44
Taaca, K. L. M., & Vasquez, M. R. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.034 · Cited by 42
Babaei, M., Salehi, S., Anbia, M., & Kazemipour, M. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.8b00014 · Cited by 41
Pal, A., Chand, S., Madden, D. G., Franz, D., Ritter, L., Johnson, A. M., Space, B., Curtin, T., & Das, M. C. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b01402 · Cited by 41
Fabrication of hybrid coating material of polypropylene itaconate containing MOF-5 for CO2 capture
Lestari, W. W., Wibowo, A. H., Astuti, S., Irwinsyah, Pamungkas, A. Z., & Krisnandi, Y. K. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.11.006 · Cited by 32
Pyrolyzed chitosan-based materials for CO2/CH4 separation
Lourenço, M. A. O., Nunes, C., Gomes, J. R. B., Pires, J., Pinto, M. L., & Ferreira, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.180 · Cited by 32
Bahamon, D., Ogungbenro, A. E., Khaleel, M., Abu-Zahra, M. R. M., & Vega, L. F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05542 · Cited by 31
Pérez-Botella, E., Palomino, M., Valencia, S., & Rey, F. (2019) · Green Energy and Technology · doi:10.1007/978-981-13-3504-4_7 · Cited by 29
Self-citationChallenges in characterizing adsorbents for gas storage and separation
Broom, D. P. (2023) · Adsorption · doi:10.1007/s10450-023-00424-9 · Cited by 33
Khoshraftar, Z., Taheri, F. S., Nezami, S., & Ghaemi, A. (2023) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2023.100543 · Cited by 28
Zeolite-Polymer Composite Materials as Water Scavenger
Tahraoui, Z., Nouali, H., Marichal, C., Forler, P., Klein, J., & Daou, T. J. (2021) · Molecules · doi:10.3390/molecules26164815 · Cited by 24
Lourenço, M. A. O., Siquet, C., Santos, J. L. M., Jorge, M., Gomes, J. R. B., & Ferreira, P. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b04605 · Cited by 24
Synthesis of Zeolite Nanomolecular Sieves of Different Si/Al Ratios
Sharma, P., Han, M. H., & Cho, C. (2015) · Journal of Nanomaterials · doi:10.1155/2015/912575 · Cited by 23
Electrochemical water splitting using nano-zeolite Y supported tungsten oxide electrocatalysts
Anis, S. F., & Hashaikeh, R. (2018) · Journal of Nanoparticle Research · doi:10.1007/s11051-018-4153-2 · Cited by 23
“Zeolites find main applications as adsorbents (García et al. 2014), molecular sieves in petroleum refining catalytic cracking (Anis et al. 2017b), in separation and purification of gases (Jensen et al. 2011), and as ion exchangers for domestic and industrial waste water purification (Shevade and…”
BackgroundIndustrial Zeolite Applications for Gas Adsorption and Separation Processes
Pérez-Pellitero, J., & Pirngruber, G. D. (2020) · Structure and Bonding · doi:10.1007/430_2020_75 · Cited by 23
Self-citationBoulfelfel, S. E., Findley, J. M., Fang, H., Daou, A. S. S., Ravikovitch, P. I., & Sholl, D. S. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c07790 · Cited by 22
The influence of zeolite pore topology on the separation of carbon dioxide from methane
Pérez‐Botella, E., Palomino, M., Báfero, G. B., Pastore, H. O., Valencia, S., & Rey, F. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2023.102490 · Cited by 21
Self-citationCasado‐Coterillo, C., Fernández‐Barquín, A., Valencia, S., & Irabien, Á. (2018) · Membranes · doi:10.3390/membranes8020032 · Cited by 18
Self-citationAluminum coated natural zeolite for water defluoridation: A mechanistic insight
Wirtu, Y. D., Melak, F., Yitbarek, M., & Astatkie, H. (2020) · Groundwater for Sustainable Development · doi:10.1016/j.gsd.2020.100525 · Cited by 18
Li, C., Luo, H., Yuan, Y., Tong, L., Chen, B., Yang, T., Yuan, C., Chahine, R., & Xiao, J. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.04.022 · Cited by 16
Panezai, H., Sun, J., Jin, X., & Ullah, R. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.01.027 · Cited by 16
Fang, H., Daou, A. S. S., Boulfelfel, S. E., Findley, J. M., Ravikovitch, P. I., & Sholl, D. S. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c06115 · Cited by 13
Bordonhos, M., Severino, M. I., Marandi, A., Nouar, F., Jorge, M., Gomes, J. R. B., Serre, C., & Pinto, M. L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.169276 · Cited by 14
Teh, T. W., Franz, P., Stierle, R., Hansen, N., & Groß, J. (2025) · Molecular Physics · doi:10.1080/00268976.2025.2471510 · Cited by 11
Ab Initio Screening of Divalent Cations for CH4, CO2, H2, and N2 Separations in Chabazite Zeolite
Daouli, A., Rey, J., Lahrar, E. H., Valtchev, V., Badawi, M., & Guillet‐Nicolas, R. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c01882 · Cited by 11
Sketching a Portrait of the Optimal Adsorbent for CO2 Separation by Pressure Swing Adsorption
García, E. J., Pérez‐Pellitero, J., Pirngruber, G. D., & Jallut, C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04877 · Cited by 10
Self-citationMohammed, S., Liu, M., & Gadikota, G. (2021) · Environmental Science Nano · doi:10.1039/d0en01282c · Cited by 9
Karimi, M., Aly, E., Rodrigues, A. W. O., Freitas, F. A. D. S., & Silva, J. A. C. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.137050 · Cited by 8
Preparation of Continuous Highly Hydrophobic Pure Silica ITQ-29 Zeolite Layers on Alumina Supports
Palomino, M., Ono, H., Valencia, S., & Corma, A. (2020) · Molecules · doi:10.3390/molecules25184150 · Cited by 8
“ITQ-29 has been proven to be the most hydrophobic of the LTA zeolites, based on the isosteric heat of CO2 adsorption, making this zeolite a suitable adsorbent for natural gas upgrading, due to its high regenerability and adsorption capacity of CO2 over CH4 [25,26].”
BackgroundSelf-citationCO2 captured by silicoaluminophosphate (SAPO) zeotypes
Su, H., Yan, Y., Zhang, J., & Yan, W. (2023) · Sustainable Chemistry for Climate Action · doi:10.1016/j.scca.2023.100022 · Cited by 9
Vega‐Vila, J. C., Holkar, A., Arnold, R. A., Prentice, D. P., Dong, S., Tang, L., Plante, E. C. L., Ellison, K. M., Kumar, A., Bauchy, M., et al. (2023) · Reaction Chemistry & Engineering · doi:10.1039/d2re00466f · Cited by 6
Evaluation of potable groundwater quality in some villages of Adilabad in Andhra Pradesh, India.
Rasheed, M. A., Radha, B. A., Rao, P. L. S., Lakshmi, M., Chennaiah, J. B., & Dayal, A. M. (2012) · PubMed · Cited by 6
Lourenço, M. A. O., Gomes, J. R. B., & Ferreira, P. (2017) · Wiley eBooks · doi:10.1002/9783527807130.ch9 · Cited by 5
A new comprehensive evaluation indicator of adsorbent for gas separation
Wei, M., Zhao, Q., Liu, Q., Li, L., & Zhong, Z. (2020) · Environmental Technology · doi:10.1080/09593330.2020.1845818 · Cited by 5
Selective CO2 adsorption over alkali metal cation-exchanged UZM-9 zeolites
Halamek, J., Kubů, M., Koreň, B., Čejka, J., Valenta, J., & Bulánek, R. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2025.103305 · Cited by 4
Viciazites: Carbon materials with adjacent nitrogen functionalities for advanced CO2 capture
Kondo, K., Uchizono, A., Pu, L., Takahashi, I., Suzuki, R., Nakamura, S., Kan, K., Kazuma Gotoh, B., Soejima, T., Sato, S., et al. (2026) · Carbon · doi:10.1016/j.carbon.2026.121405 · Cited by 4
Perspectives of Scaling Up the Use of Zeolites for Selective Separations from Lab to Industry
Martins, V. F. D., Ribeiro, A. M., Ferreira, A. F. P., & Rodrigues, A. E. (2020) · Structure and bonding · doi:10.1007/430_2020_71 · Cited by 4
Jamdade, S., Gurnani, R., Fang, H., Boulfelfel, S. E., Ramprasad, R., & Sholl, D. S. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c03544 · Cited by 4
Computational Screening of MOFs for CO2 Capture
Altıntaş, Ç., Eruçar, İ., & Keskın, S. (2021) · Springer eBooks · doi:10.1007/978-3-030-63380-6_6 · Cited by 3
Zeolite and Silica-based CO2 Adsorbents
Laugel, G., Bingre, R., & Louis, B. (2018) · Post-combustion Carbon Dioxide Capture Materials · doi:10.1039/9781788013352-00076 · Cited by 2
Adsorption technology for upgrading biogas to biomethane
Rainone, F., Balsamo, M., Lancia, A., & Erto, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18479-6.00014-4 · Cited by 3
Sharlin, S., Lozano, R. A., & Josephson, T. R. (2024) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.4c00236 · Cited by 2
Toward rational design of Zr-MOF for CO 2 /CH 4 mixture separation
Dziadyk-Stopyra, E., Rogacka, J. M., Podsiadły-Paszkowska, A., Kawecki, P., Kuchta, B., & Szyja, B. M. (2024) · Separation Science and Technology · doi:10.1080/01496395.2024.2353193 · Cited by 1
“[13,14] A good example is the work of Kosinov et al., [15] where a high silica SSZ-13 membrane was shown to have good selectivity and due”
MethodArif, E. (2016) · Cross Connect (Southern Cross University)
Selective CO Adsorption Separation from CO2 via Cu-modified Adsorbents
Abbassi, M. (2021) · uO Research (University of Ottawa) · doi:10.20381/ruor-26373
Selective Co2 Adsorption Over Alkali Metal Cation-Exchanged Uzm-9 ZeolitesPreprint
Halamek, J., Kubů, M., Koreň, B., Čejka, J., Valenta, J., & Bulánek, R. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5342475
Biopolymer-based matrix mixed membranes for CO₂ y CH₂ separation
Moranchel-Pérez, J. (2022) · UCrea (University of Cantabria)
Capture sélective du CO2 par des matériaux zéolithiques
Bénariac-Doumal, L. (2024) · theses.fr (ABES) · doi:10.70675/1c555223z0fa9z4e74z98ffzd42f642ed2c9
Gao, S., Wang, X., Gao, S., Fahda, M., Wang, D., Yu, H., You, Z., Liu, X., Qi, L., Shao, F., et al. (2026) · RSC Advances · doi:10.1039/d6ra01852a
“22 In general, zeolites with lower Si/Al ratios exhibit higher cation-exchange capacity and Brønsted acid density, which enhance ion-exchange capacity and catalytic performance in certain reactions.”
Tailoring Montmorillonite Interlayer Microporosity for Highly Selective CO2/CH4 Separation
Grekov, D. I., Azrak, A. E., Truche, L., & Pré, P. (2026) · Langmuir · doi:10.1021/acs.langmuir.6c02596
Cation-exchanged FAU zeolites for efficient CO2/N2 adsorptive separation
Wang, W. L., Zhu, Y. X., Zhang, Y. X., Xu, R., & Jiang, L. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.140059
Dong, J., Wan, K., Li, Z., Wu, J., Wu, D., Huang, W., Wang, M., Gao, N., Lin, L., Xin, Q., et al. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6c03884
Metadata
- Authors
- García, E. J., Pérez-Pellitero, J., Pirngruber, G. D., Jallut, C., Palomino, M., Rey, F., & Valencia, S.
- Affiliations
- IFP Énergies nouvelles (FR)
- IFP Energies nouvelles, Rond Point de l’échangeur de Solaize, 69360 Solaize, France
- Lyon 1 Université (FR)
- Universidad Complutense de Madrid (ES)
- Consejo Superior de Investigaciones Científicas (ES)
- Corresponding author
- Pirngruber, Gerhard D.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-29
- Volume
- 53
- Issue
- 23
- Pages
- 9860-9874
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2320366173
- Semantic Scholar
- 07033a48e7e7fe8d8cf70be7a4bbe162e986d806
- Cited by
- 63
- References
- 50
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 3 · 2023: 10 · 2022: 1 · 2021: 7 · 2020: 9 · 2019: 4 · 2018: 6 · 2017: 6 · 2016: 2 · 2015: 3 · 2014: 1
- FWCI
- 4.67
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- cc-by-nc-nd
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- HAL (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Keywords
- CO2 separation, pressure swing adsorption, zeolite adsorbents, FAU zeolite, zeolite A, sodium content, Si/Al ratio, CO2/CH4 separation, adsorption capacity, selectivity, Henry constant, heat of adsorption, adsorbent regeneration, SAPO-37
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.