Tuning the Adsorption Properties of Zeolites as Adsorbents for CO2 Separation: Best Compromise between the Working Capacity and Selectivity
Open accessThe DOI matches its Crossref record; 48 of the 50 references it cites were found in a registry or an index.
Abstract
The choice of an appropriate adsorbent for CO 2 separation by pressure-swing adsorption remains a field of intense research. In this work, several FAU and LTA zeolites with different Na contents (Si/Al ratios) are studied for the separation of CO 2 from mixtures of CO 2, CO, and CH 4 by means of breakthrough experiments. The breakthrough experiments were carried out between 1 and 5 bar at 303 K using two feed mixtures: 50/50 (v/v) CO 2 /CH 4 and 75/15/15 (v/v/v) CO 2 /CH 4 /CO. The most polar zeolites, i.e., those with high Na content, exhibit the highest adsorption capacity and selectivity for CO 2, but their regeneration is difficult; hence, their working capacity is low. The opposite is true for the least polar zeolites, i.e., those with low Na content. In order to quantify the trade-off between the selectivity and working capacity, the Ruthven statistical model (RSM) was used. It satisfactorily reproduced the experimental trends. We, therefore, used the RSM to identify the properties of the adsorbent that lead to an optimal compromise between the working capacity and separation factor. The critical parameter is the concentration of extraframework cations, which, in turn, depends on the framework charge of the zeolites FAU and LTA. The optimal trade-off zone is defined in terms of the Henry constant of CO 2 ( K CO 2 ). It is found that this zone is placed between K CO 2 = 5 × 10 –3 and 50 × 10 –3 molecules·bar –1 ·Å –3 . This interval corresponds to a heat of adsorption of CO 2 at zero coverage between 27 and 32 kJ·mol –1 . In our study, this optimal range of Henry constants was achieved for the zeolites Na-USY, SAPO-37, LTA (Si/Al = 5), and EMC-1.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“There are different ways that zeolitic adsorbents may be selective toward CO2. One is by exploiting differences in the interaction strength, i.e., the heat of adsorption, of the two adsorbates. Another possibility involves discriminating between their sizes, e.g., molecular sieving. More complex mechanisms, such as trapdoor mechanisms and guest-induced structure flexibility, are also interesting,”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“In consequence, these materials present large thermodynamic CO2/CH4 selectivities.”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“Selectivity on low silica (highly polar) zeolites, such as A, X, and Y zeolites, is achieved by the first mechanism. CO2 adsorbs more strongly than methane on these materials due to the electrostatic interaction of its quadrupolar moment with the extraframework cations.483”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“Lower polarity FAU, CHA, and LTA materials present good selectivities, intermediate working capacities, and moderate heats of adsorption in the range of 27–33 kJ/mol, described as optimal for a thermodynamic separation.483”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
In the citing paper
“However, this is disadvantageous for the regeneration step, as a higher energy input, i.e., higher temperatures in TSA or lower pressures in PSA processes, will be needed for desorbing the strongly adsorbed (or even chemically bonded) CO2.”
From Zeolites in Adsorption Processes: State of the Art and Future Prospects (2022) · cites this paper as [483]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Sing, K. S. W. (1982) · Pure and Applied Chemistry · doi:10.1351/pac198254112201 · Cited by 2,091
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Metallo-organic molecular sieve for gas separation and purification
Min Wang, Q., Shen, D., Bülow, M., Ling Lau, M., Deng, S., Fitch, F. R., Lemcoff, N. O., & Semanscin, J. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00405-5 · Cited by 771
Crystalline Zeolites. I. The Properties of a New Synthetic Zeolite, Type A
Breck, D. W., Eversole, W. G., Milton, R. M., Reed, T. B., & Thomas, T. L. (1956) · Journal of the American Chemical Society · doi:10.1021/ja01604a001 · Cited by 634
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Natural gas treating by selective adsorption: Material science and chemical engineering interplay
Tagliabue, M., Farrusseng, D., Valencia, S., Aguado, S., Ravon, U., Rizzo, C., Corma, A., & Mirodatos, C. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.010 · Cited by 471
Self-citationDunne, J. A., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960496r · Cited by 468
CO2Adsorption-Based Separation by Metal Organic Framework (Cu-BTC) versus Zeolite (13X)
Liang, Z., Marshall, M., & Chaffee, A. L. (2009) · Energy & Fuels · doi:10.1021/ef800938e · Cited by 445
Discriminative Separation of Gases by a “Molecular Trapdoor” Mechanism in Chabazite Zeolites
Shang, J., Li, G., Singh, R., Gu, Q., Nairn, K. M., Bastow, T. J., Medhekar, N., Doherty, C. M., Hill, A. J., Liu, J. Z., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja309274y · Cited by 436
Carbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
Delprato, F., Delmotte, L., Guth, J. L., & Huve, L. (1990) · Zeolites · doi:10.1016/s0144-2449(05)80310-0 · Cited by 348
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Palomino, M., Corma, A., Rey, F., & Valencia, S. (2010) · Langmuir · doi:10.1021/la9026656 · Cited by 289
Self-citationCO2 and CH4 Separation by Adsorption Using Cu-BTC Metal−Organic Framework
Hamon, L., Jolimaître, E., & Pirngruber, G. D. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie902008g · Cited by 252
Self-citationCapture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption
Xiao, P., Zhang, J., Webley, P., Li, G., Singh, R., & Todd, R. (2008) · Adsorption · doi:10.1007/s10450-008-9128-7 · Cited by 248
Maurin, G., Llewellyn, P. L., & Bell, R. G. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp052716s · Cited by 210
NaKA sorbents with high CO2-over-N2 selectivity and high capacity to adsorb CO2
Liu, Q., Mace, A., Bacsik, Z., Sun, J., Laaksonen, A., & Hedin, N. (2010) · Chemical Communications · doi:10.1039/c000900h · Cited by 187
Wiersum, A. D., Chang, J.-S., Serre, C., & Llewellyn, P. L. (2013) · Langmuir · doi:10.1021/la3044329 · Cited by 168
Palomino, M., Corma, A., Jordá, J. L., Rey, F., & Valencia, S. (2012) · Chem. Commun. · doi:10.1039/c1cc16320e · Cited by 161
Self-citationWang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
CO2/CH4, CH4/H2 and CO2/CH4/H2 separations at high pressures using Mg2(dobdc)
Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.09.004 · Cited by 152
Derouane, É. G., André, J. M., & Lucas, A. A. (1987) · Chemical Physics Letters · doi:10.1016/0009-2614(87)80895-3 · Cited by 144
Determination of Composition Range for “Molecular Trapdoor” Effect in Chabazite Zeolite
Shang, J., Li, G., Singh, R., Xiao, P., Liu, J. Z., & Webley, P. A. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4015146 · Cited by 143
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Valenzano, L., Civalleri, B., Sillar, K., & Sauer, J. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp205869k · Cited by 137
Pirngruber, G. D., Hamon, L., Bourrelly, S., Llewellyn, P. L., Lenoir, E., Guillerm, V., Serre, C., & Devic, T. (2012) · ChemSusChem · doi:10.1002/cssc.201100716 · Cited by 135
Self-citationHigh-pressure adsorption of methane in zeolites NaX, MgX, CaX, SrX and BaX
Zhang, S. Y., Talu, O., & Hayhurst, D. T. (1991) · The Journal of Physical Chemistry · doi:10.1021/j100157a044 · Cited by 123
Wirawan, S. K., & Creaser, D. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.047 · Cited by 121
ZK‐5: A CO 2 ‐Selective Zeolite with High Working Capacity at Ambient Temperature and Pressure
Liu, Q., Pham, T. D., Porosoff, M. D., & Lobo, R. F. (2012) · ChemSusChem · doi:10.1002/cssc.201200339 · Cited by 118
A SIMPLE PARAMETER FOR SELECTING AN ADSORBENT FOR GAS SEPARATION BY PRESSURE SWING ADSORPTION
Rege, S., & Yang, R. (2001) · Separation Science and Technology · doi:10.1081/ss-100107907 · Cited by 109
Ruthven, D. M. (1976) · AIChE Journal · doi:10.1002/aic.690220419 · Cited by 92
Selective Dynamic CO2 Separations on Mg-MOF-74 at Low Pressures: A Detailed Comparison with 13X
Rémy, T., Peter, S. A., der Perre, S. V., Valvekens, P., Vos, D. E. D., Baron, G. V., & Denayer, J. F. M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp401923v · Cited by 92
Characterization of nanopores by standard enthalpy and entropy of adsorption of probe molecules
Myers, A. L. (2004) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.04.004 · Cited by 91
Rémy, T., Peter, S. A., Tendeloo, L. V., der Perre, S. V., Lorgouilloux, Y., Kirschhock, C. E. A., Baron, G. V., & Denayer, J. F. M. (2013) · Langmuir · doi:10.1021/la400352r · Cited by 91
Sorption of light paraffins in type-A zeolites. Analysis and interpretation of equilibrium isotherms
Ruthven, D. M., & Loughlin, K. F. (1972) · Journal of the Chemical Society Faraday Transactions 1 Physical Chemistry in Condensed Phases · doi:10.1039/f19726800696 · Cited by 86
Physisorption in confined geometry
Derycke, I., Vigneron, J. P., Lambin, P., Lucas, A. A., & Derouane, É. G. (1991) · The Journal of Chemical Physics · doi:10.1063/1.460590 · Cited by 83
Molecular sieve carbons for CO2 capture
Carruthers, J. D., Petruska, M. A., Sturm, E., & Wilson, S. M. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.07.016 · Cited by 78
CO2 capture from flue gas by two successive VPSA units using 13XAPG
Wang, L., Liu, Z., Li, P., Wang, J., & Yu, J. (2012) · Adsorption · doi:10.1007/s10450-012-9431-1 · Cited by 69
García, E. J., Mowat, J. P. S., Wright, P. A., Pérez‐Pellitero, J., Jallut, C., & Pirngruber, G. D. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp309526k · Cited by 69
Self-citationFayad, E. J., Bats, N., Kirschhock, C. E. A., Rebours, B., Quoineaud, A., & Martens, J. A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000304 · Cited by 68
FAU-Type Zeolite Nanocasted Carbon Replicas for CO2 Adsorption and Hydrogen Purification
Ducrot-Boisgontier, C., Parmentier, J., Faour, A., Patarin, J., & Pirngruber, G. D. (2010) · Energy & Fuels · doi:10.1021/ef100011q · Cited by 64
Self-citationMaurin, G., Bell, R. G., Kuchta, B., Poyet, T., & Llewellyn, P. L. (2005) · Adsorption · doi:10.1007/s10450-005-5946-z · Cited by 47
Briend, M., Lamy, A., Peltre, M. J., Man, P. P., & Barthomeuf, D. (1993) · Zeolites · doi:10.1016/s0144-2449(05)80278-7 · Cited by 43
García, E. J., Pérez‐Pellitero, J., Jallut, C., & Pirngruber, G. D. (2013) · Langmuir · doi:10.1021/la401178u · Cited by 19
Self-citation
Research works printed but not linked: 1
- Keller J., 2005, Experimental Methods and Adsorption Isotherms
Cited by
Zeolites in Adsorption Processes: State of the Art and Future Prospects
Pérez-Botella, E., Valencia, S., & Rey, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00140 · Cited by 1,126
Self-citationAdvances in applied supramolecular technologies
Williams, G. T., Haynes, C. J. E., Fares, M., Caltagirone, C., Hiscock, J. R., & Gale, P. A. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00948b · Cited by 188
Assessing CH4/N2 separation potential of MOFs, COFs, IL/MOF, MOF/Polymer, and COF/Polymer composites
Gulbalkan, H. C., Haslak, Z. P., Altintas, C., Uzun, A., & Keskin, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131239 · Cited by 186
Xian, S., Peng, J., Zhang, Z., Xia, Q., Wang, H., & Li, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.041 · Cited by 142
Scott, H. S., Shivanna, M., Bajpai, A., Madden, D. G., Chen, K., Pham, T., Forrest, K. A., Hogan, A., Space, B., Perry, J. J., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15250 · Cited by 139
Metadata
- Authors
- García, E. J., Pérez-Pellitero, J., Pirngruber, G. D., Jallut, C., Palomino, M., Rey, F., & Valencia, S.
- Affiliations
- IFP Énergies nouvelles (FR)
- IFP Energies nouvelles, Rond Point de l’échangeur de Solaize, 69360 Solaize, France
- Lyon 1 Université (FR)
- Universidad Complutense de Madrid (ES)
- Consejo Superior de Investigaciones Científicas (ES)
- Corresponding author
- Pirngruber, Gerhard D.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-29
- Volume
- 53
- Issue
- 23
- Pages
- 9860-9874
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2320366173
- Semantic Scholar
- 07033a48e7e7fe8d8cf70be7a4bbe162e986d806
- Cited by
- 63
- References
- 50
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 3 · 2023: 10 · 2022: 1 · 2021: 7 · 2020: 9 · 2019: 4 · 2018: 6 · 2017: 6 · 2016: 2 · 2015: 3 · 2014: 1
- FWCI
- 4.67
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- cc-by-nc-nd
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- HAL (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Keywords
- CO2 separation, pressure swing adsorption, zeolite adsorbents, FAU zeolite, zeolite A, sodium content, Si/Al ratio, CO2/CH4 separation, adsorption capacity, selectivity, Henry constant, heat of adsorption, adsorbent regeneration, SAPO-37
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.