The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
New Insights into the Interactions of CO2 with Amine-Functionalized Silica
Abstract
The CO 2 −amine chemistry in gas−solid processes was investigated under both humid and dry conditions using aminopropyl-grafted pore-expanded MCM-41 silica (MONO-PE-MCM-41). To draw accurate conclusions, a set of conditions had to be met including (i) the use of an adsorbent with open pore structure and readily accessible adsorption sites, e.g. MONO-PE-MCM-41 with a mean pore size of 7.2 nm; (ii) the CO 2 concentration in the feed should be high enough to achieve saturation via chemisorption, but low enough to avoid any additional physisorption, e.g., 5% CO 2 in N 2; (iii) the use of a reliable method for the accurate measurement of CO 2 /N ratio. Under such conditions, the obtained CO 2 /N ratios were reminiscent of those obtained in the CO 2 scrubbing process using ethanolamine solutions. Under dry conditions, the CO 2 /N ratio was close to 0.5, consistent with the formation of carbamate. Streams with relative humidity (RH) of 27, 61, and 74% were studied as well. As RH in the feed increased, CO 2 /N ratio increased from 0.57 to 0.88, in line with the gradual formation of bicarbonate. As for the determination of CO 2 /N ratio under dry conditions, both thermogravimetry (TG) and mass spectrometry (MS) were suitable, whereas in the presence of moisture, TG was found to drastically underestimate the CO 2 uptake. The seemingly disparate CO 2 /N ratios reported in the literature for various propylamine-bearing adsorbents were rationalized on the basis of the adsorbent pore structure and/or the experimental conditions used.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
CO2‐Alkanolamine Reaction Kinetics: A Review of Recent Studies
Vaidya, P. D., & Kenig, E. Y. (2007) · Chemical Engineering & Technology · doi:10.1002/ceat.200700268 · Cited by 720
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Self-citationThermal and Chemical Stability of Regenerable Solid Amine Sorbent for CO2 Capture
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2006) · Energy & Fuels · doi:10.1021/ef050402y · Cited by 421
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Corrosion Behavior of Carbon Steel in the CO2 Absorption Process Using Aqueous Amine Solutions
Veawab, A., Tontiwachwuthikul, P., & Chakma, A. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9901630 · Cited by 335
Tailoring Pore Properties of MCM-48 Silica for Selective Adsorption of CO2
Kim, S., Ida, J., Guliants, V. V., & Lin, Y. S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp045634x · Cited by 332
Aminopropyl-functionalized mesoporous silicas as CO2 adsorbents
Knowles, G. P., Graham, J. V., Delaney, S. W., & Chaffee, A. L. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.014 · Cited by 326
Alternative stripper configurations for CO2 capture by aqueous amines
Oyenekan, B. A., & Rochelle, G. T. (2007) · AIChE Journal · doi:10.1002/aic.11316 · Cited by 321
Selection of new absorbents for carbon dioxide capture
Ma’mun, S., Svendsen, H. F., Hoff, K. A., & Juliussen, O. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.04.007 · Cited by 317
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
Selection of new absorbents for carbon dioxide capture
MAMUM, S., SVENDSEN, H., HOFF, K., & JULIUSSEN, O. (2005) · Greenhouse Gas Control Technologies 7 · doi:10.1016/b978-008044704-9/50006-9 · Cited by 289
The Effect of Water on the Adsorption of CO2 and C3H8 on Type X Zeolites
Brandani, F., & Ruthven, D. M. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie040183o · Cited by 264
Diethylenetriamine[propyl(silyl)]-Functionalized (DT) Mesoporous Silicas as CO2 Adsorbents
Knowles, G. P., Delaney, S. W., & Chaffee, A. L. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050589g · Cited by 242
Sayari, A., Yang, Y., Kruk, M., & Jaroniec, M. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984504j · Cited by 237
Self-citationLiquid-Phase Composition Determination in CO2−H2O−Alkanolamine Systems: An NMR Study
Jakobsen, J. P., Krane, J., & Svendsen, H. F. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048813+ · Cited by 223
Online NMR spectroscopic study of species distribution in MEA–H2O–CO2 and DEA–H2O–CO2
Böttinger, W., Maiwald, M., & Hasse, H. (2008) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2007.09.017 · Cited by 206
Liu, X., Zhou, L., Fu, X., Sun, Y. J., Su, W., & Zhou, Y. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.11.005 · Cited by 140
Applications of Pore-Expanded Mesoporous Silica. 7. Adsorption of Volatile Organic Compounds
Serna-Guerrero, R., & Sayari, A. (2007) · Environmental Science & Technology · doi:10.1021/es0627996 · Cited by 97
Self-citation
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
New sensing mechanisms for design of fluorescent chemosensors emerging in recent years
Wu, J., Liu, W., Ge, J., Zhang, H., & Wang, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00224k · Cited by 1,858
Recycling of carbon dioxide to methanol and derived products – closing the loop
Goeppert, A., Czaun, M., Jones, J.-P., Surya Prakash, G. K., & Olah, G. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00122b · Cited by 1,528
Anthropogenic Chemical Carbon Cycle for a Sustainable Future
Olah, G. A., Prakash, G. K. S., & Goeppert, A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202642y · Cited by 1,376
Metadata
- Authors
- Serna-Guerrero, R., Da’na, E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-11-06
- Volume
- 47
- Issue
- 23
- Pages
- 9406-9412
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2318887899
- Cited by
- 404
- References
- 25
- FWCI
- 61.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.