The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
New Insights into the Interactions of CO2 with Amine-Functionalized Silica
Abstract
The CO 2 −amine chemistry in gas−solid processes was investigated under both humid and dry conditions using aminopropyl-grafted pore-expanded MCM-41 silica (MONO-PE-MCM-41). To draw accurate conclusions, a set of conditions had to be met including (i) the use of an adsorbent with open pore structure and readily accessible adsorption sites, e.g. MONO-PE-MCM-41 with a mean pore size of 7.2 nm; (ii) the CO 2 concentration in the feed should be high enough to achieve saturation via chemisorption, but low enough to avoid any additional physisorption, e.g., 5% CO 2 in N 2; (iii) the use of a reliable method for the accurate measurement of CO 2 /N ratio. Under such conditions, the obtained CO 2 /N ratios were reminiscent of those obtained in the CO 2 scrubbing process using ethanolamine solutions. Under dry conditions, the CO 2 /N ratio was close to 0.5, consistent with the formation of carbamate. Streams with relative humidity (RH) of 27, 61, and 74% were studied as well. As RH in the feed increased, CO 2 /N ratio increased from 0.57 to 0.88, in line with the gradual formation of bicarbonate. As for the determination of CO 2 /N ratio under dry conditions, both thermogravimetry (TG) and mass spectrometry (MS) were suitable, whereas in the presence of moisture, TG was found to drastically underestimate the CO 2 uptake. The seemingly disparate CO 2 /N ratios reported in the literature for various propylamine-bearing adsorbents were rationalized on the basis of the adsorbent pore structure and/or the experimental conditions used.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
CO2‐Alkanolamine Reaction Kinetics: A Review of Recent Studies
Vaidya, P. D., & Kenig, E. Y. (2007) · Chemical Engineering & Technology · doi:10.1002/ceat.200700268 · Cited by 720
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Self-citationThermal and Chemical Stability of Regenerable Solid Amine Sorbent for CO2 Capture
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2006) · Energy & Fuels · doi:10.1021/ef050402y · Cited by 421
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
New sensing mechanisms for design of fluorescent chemosensors emerging in recent years
Wu, J., Liu, W., Ge, J., Zhang, H., & Wang, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00224k · Cited by 1,858
Recycling of carbon dioxide to methanol and derived products – closing the loop
Goeppert, A., Czaun, M., Jones, J.-P., Surya Prakash, G. K., & Olah, G. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00122b · Cited by 1,528
Anthropogenic Chemical Carbon Cycle for a Sustainable Future
Olah, G. A., Prakash, G. K. S., & Goeppert, A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202642y · Cited by 1,376
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Ionic liquids for CO2 capture—Development and progress
Hasib-ur-Rahman, M., Siaj, M., & Larachi, F. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.03.008 · Cited by 655
Stabilization of Amine-Containing CO2 Adsorbents: Dramatic Effect of Water Vapor
Sayari, A., & Belmabkhout, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1013773 · Cited by 635
Self-citationPorous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Self-citationHao, G.-P., Li, W.-C., Qian, D., Wang, G.-H., Zhang, W.-P., Zhang, T., Wang, A.-Q., Schüth, F., Bongard, H.-J., & Lu, A.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203857g · Cited by 569
Carbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Self-citationCarbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.042 · Cited by 489
Self-citationAdsorption of heavy metals on functionalized-mesoporous silica: A review
Da'na, E. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.03.050 · Cited by 476
Self-citationApplication of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Self-citationChromogenic/Fluorogenic Ensemble Chemosensing Systems
Wu, J., Kwon, B., Liu, W., Anslyn, E. V., Wang, P., & Kim, J. S. (2015) · Chemical Reviews · doi:10.1021/cr500553d · Cited by 402
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Fluorescent Chemosensor for Detection and Quantitation of Carbon Dioxide Gas
Liu, Y., Tang, Y., Barashkov, N. N., Irgibaeva, I. S., Lam, J. W. Y., Hu, R., Birimzhanova, D., Yu, Y., & Tang, B. Z. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103947j · Cited by 396
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
Choi, W., Min, K., Kim, C., Ko, Y. S., Jeon, J. W., Seo, H., Park, Y.-K., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms12640 · Cited by 338
Heydari-Gorji, A., Belmabkhout, Y., & Sayari, A. (2011) · Langmuir · doi:10.1021/la202972t · Cited by 335
Self-citationAmine-modified MCM-41 mesoporous silica for carbon dioxide capture
Mello, M. R., Phanon, D., Silveira, G. Q., Llewellyn, P. L., & Ronconi, C. M. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.02.022 · Cited by 324
Chaikittisilp, W., Kim, H.-J., & Jones, C. W. (2011) · Energy & Fuels · doi:10.1021/ef201224v · Cited by 320
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Milner, P. J., Siegelman, R. L., Forse, A. C., Gonzalez, M. I., Runčevski, T., Martell, J. D., Reimer, J. A., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07612 · Cited by 288
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Mohanty, P., Kull, L. D., & Landskron, K. (2011) · Nature Communications · doi:10.1038/ncomms1405 · Cited by 282
Toward the Development and Deployment of Large-Scale Carbon Dioxide Capture and Conversion Processes
Yuan, Z., Eden, M. R., & Gani, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03277 · Cited by 282
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900837t · Cited by 281
Self-citationHighly selective CO2 capture by S-doped microporous carbon materials
Seema, H., Kemp, K. C., Le, N. H., Park, S.-W., Chandra, V., Lee, J. W., & Kim, K. S. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.006 · Cited by 277
Primary, secondary, and tertiary amines for CO2 capture: Designing for mesoporous CO2 adsorbents
Ko, Y. G., Shin, S. S., & Choi, U. S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.03.045 · Cited by 277
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Amine-bearing mesoporous silica for CO2 removal from dry and humid air
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.044 · Cited by 274
Self-citationNanostructured silica as a support for regenerable high-capacity organoamine-based CO2 sorbents
Goeppert, A., Meth, S., Prakash, G. K. S., & Olah, G. A. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00136h · Cited by 253
Wurzbacher, J. A., Gebald, C., & Steinfeld, A. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01681d · Cited by 252
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Single-Component and Binary CO2 and H2O Adsorption of Amine-Functionalized Cellulose
Gebald, C., Wurzbacher, J. A., Borgschulte, A., Zimmermann, T., & Steinfeld, A. (2014) · Environmental Science & Technology · doi:10.1021/es404430g · Cited by 226
CO2 removal using amine-functionalized kenaf in pressure swing adsorption system
Kamarudin, K. S. N., Zaini, N., & Khairuddin, N. E. A. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.12.040 · Cited by 31
Adsorption and diffusion of moisture and wet flue gas on silica gel
Goyal, P., Purdue, M. J., & Farooq, S. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115890 · Cited by 26
Metadata
- Authors
- Serna-Guerrero, R., Da’na, E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-11-06
- Volume
- 47
- Issue
- 23
- Pages
- 9406-9412
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2318887899
- Cited by
- 404
- References
- 25
- FWCI
- 61.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.