The DOI matches its Crossref record.
Pilot-Scale Gasification of Corn Stover, Switchgrass, Wheat Straw, and Wood: 1. Parametric Study and Comparison with Literature
Abstract
A parametric study of the gasification of four feedstocks (corn stover, switchgrass, wheat straw, and wood) has been performed on an experimental, pilot-scale (0.5 ton/day) gasification facility. A comparison was made of the performance of the gasifier as a function of feedstock, in terms of the syngas production and composition. In these experiments, pelletized feedstock was used, so that the shapes and sizes of the materials did not influence the results. A total of 22 statistically designed experimental conditions were examined for each feedstock, including the effects of varying the temperature of the fluidized bed, the temperature of the secondary thermal cracker, and the steam-to-biomass ratio. For each experimental condition, the permanent-gas composition was measured continuously by gas chromatography (GC). Tars were measured continuously using a molecular-beam mass spectrometer (MBMS). Sulfur analysis by GC was also conducted for three of the feedstocks studied. The results from this study show that there were significant differences between the feedstocks studied in terms of light gases formed, but less apparent variation in tar formation. In general, the variations in products were smaller at higher temperatures. A preliminary analysis of gasifier efficiency was performed using an Aspen Plus process model for selected gasification conditions. Finally, a comparison was made between the results of this work and other similar biomass gasification studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ippolito, J. A., Cui, L., Kammann, C., Wrage-Mönnig, N., Estavillo, J. M., Fuertes-Mendizabal, T., Cayuela, M. L., Sigua, G., Novak, J., Spokas, K., et al. (2020) · Biochar · doi:10.1007/s42773-020-00067-x · Cited by 927
Carpenter, D., Westover, T. L., Czernik, S., & Jablonski, W. (2014) · Green Chem. · doi:10.1039/c3gc41631c · Cited by 686
Self-citationEvaluation of thermochemical routes for hydrogen production from biomass: A review
Arregi, A., Amutio, M., Lopez, G., Bilbao, J., & Olazar, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.03.089 · Cited by 504
Commercial Biomass Syngas Fermentation.
Daniell, J., Köpke, M., & Simpson, S. (2012) · Energies · doi:10.3390/en5125372 · Cited by 444
You, S., Ok, Y. S., Chen, S. S., Tsang, D. C. W., Kwon, E. E., Lee, J., & Wang, C.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.177 · Cited by 421
Understanding biomass feedstock variability
Kenney, K. L., Smith, W. A., Gresham, G. L., & Westover, T. L. (2013) · Biofuels · doi:10.4155/bfs.12.83 · Cited by 368
Shen, Y., Linville, J. L., Urgun-Demirtas, M., Schoene, R. P., & Snyder, S. W. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.016 · Cited by 310
Biomass for thermochemical conversion: targets and challenges
Tanger, P., Field, J. L., Jahn, C. E., DeFoort, M. W., & Leach, J. E. (2013) · Frontiers in Plant Science · doi:10.3389/fpls.2013.00218 · Cited by 283
Building materials could store more than 16 billion tonnes of CO 2 annually
Van Roijen, E., Miller, S. A., & Davis, S. J. (2025) · Science · doi:10.1126/science.adq8594 · Cited by 112
Mathioudakis, V., Gerbens-Leenes, P. W., Van der Meer, T. H., & Hoekstra, A. Y. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.032 · Cited by 110
(2014) · Cited by 77
Daystar, J., Gonzalez, R., Reeb, C., Venditti, R. A., Treasure, T., Abt, R., & Kelley, S. (2013) · BioResources · doi:10.15376/biores.9.1.393-444 · Cited by 50
Metadata
- Authors
- Carpenter, D. L., Bain, R. L., Davis, R. E., Dutta, A., Feik, C. J., Gaston, K. R., Jablonski, W., Phillips, S. D., & Nimlos, M. R.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-07
- Volume
- 49
- Issue
- 4
- Pages
- 1859-1871
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2081090796
- Cited by
- 174
- References
- 0
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.