The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Kinetic Evidence of the Maillard Reaction in Hydrothermal Biomass Processing: Glucose−Glycine Interactions in High-Temperature, High-Pressure Water
Abstract
Kinetic and mechanistic evidence is presented of the occurrence of a Maillard-type reaction under conditions of interest to hydrothermal biomass processing. Glucose−glycine mixtures were reacted at 250 °C and 10 MPa in an excess of water; both glucose and glycine were found to strongly influence the destruction kinetics of the other species and to result in quantitative and qualitative changes, such as strong absorbance at 420 nm and the production of a dark brown appearance and nutty odor, which are characteristic of the Maillard reaction. The presence of glucose always resulted in higher glycine destruction; the presence of glycine resulted in increased or decreased glucose destruction, depending on initial concentrations, which is consistent with results reported in the literature for lower temperature Maillard reactions. Surrogate compounds that contain the same chemical functional groups also resulted in similar trends. As a result of this reaction, the presence of proteins and amino acids in biomass feedstocks can be expected to result in processing difficulties at hydrothermal conditions: these difficulties will include fouling of process equipment, the quenching of desired reaction pathways, and difficulty in achieving separations between aqueous and oil phases produced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Self-citation
Cited by
Wang, T., Zhai, Y., Zhu, Y., Li, C., & Zeng, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.071 · Cited by 1,365
Hydrothermal liquefaction of biomass: Developments from batch to continuous process
Elliott, D. C., Biller, P., Ross, A. B., Schmidt, A. J., & Jones, S. B. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.09.132 · Cited by 969
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Garcia Alba, L., Torri, C., Samorì, C., van der Spek, J., Fabbri, D., Kersten, S. R. A., & Brilman, D. W. F. (. (2012) · Energy & Fuels · doi:10.1021/ef201415s · Cited by 477
A review of bio-oil production from hydrothermal liquefaction of algae
Guo, Y., Yeh, T., Song, W., Xu, D., & Wang, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.049 · Cited by 395
Metadata
- Authors
- Peterson, A. A., Lachance, R. P., & Tester, J. W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-28
- Volume
- 49
- Issue
- 5
- Pages
- 2107-2117
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2009051820
- Cited by
- 193
- References
- 1
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.